TREND by ACCLAIM LIGHTING

CAUTION

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90°C supplies conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

Mounting/Hanging Parts

For Flush Mount or Wall Lamp:

• 1/8" x 50mm nipple (1 PC)
• Metal bushing 16mm (1 PC)
• 8# x 1" box screws (2 PCS)
• Fixture mounting screws with ball knobs (2 PCS)
• P3 wire connectors (3 PCS)
• Tool for set screw (1 PC)

For Pendant:

• Canopy with Metal gripper (1 PC)
• 7" ground wire (1 PC)
• Round mounting strap with ground screw (1 PC)
• Fixture mounting screws with ball knobs (2 PCS)

ASSEMBLY AND INSTALLATION FOR PENDENT

Diagram Description: An exploded view illustrates the pendant installation, showing components like the outlet box, mounting bar, canopy, socket, bulb, and shade. The parts list includes: (1) Outlet Box, (2) Wire Connector, (3) Black Wire, (4) White Wire, (5) Ground Wire, (6) Box Screw, (7) Mounting Screw, (8) Hex Nut, (9) Mounting Bar, (10) Ground Screw, (11) Canopy, (12) Ball Nut, (13) Ball Nut, (14) Socket, (15) Bulb, (16) Aluminum Shade.

1. Secure the mounting bar (9) with box screws (6) to the outlet box (1).
2. Pull out the outlet wire and ground wire from the outlet box. Make wire connections with Wire Connector (2):
   • Black wire from light to Black wire (3) from power source.
   • White wire from light to White wire (4) from power source.
   • Loop the ground wire (5) to mounting bar (9) with a ground screw (6).
3. Attach the canopy (11) against the outlet box (1), secure with the ball nut (12) onto the mounting screw (7).
4. Loosen the ball nut (13), insert the bulb (15) into socket (14). After that, put the bulb into the shade (16). Finally, screw up the ball nut.

DO NOT USE BARE HANDS TO TOUCH THE BULB.

INSTALLATION IS NOW COMPLETE

REMINDER

If you have not decided whether for pendant or flush mount or wall lamp, we suggest you to try for pendant first. In case that the wire is not long enough when you convert the item for pendent after cutting the wire for wall lamp or flush mount.

ASSEMBLY AND INSTALLATION FOR FLUSH MOUNT OR WALL LAMP

Diagram Description: An exploded view illustrates the flush mount or wall lamp installation, showing components like the outlet box, mounting bar, canopy, socket, bulb, and shade. The parts list includes: (1) Outlet Box, (2) Wire Connector, (3) Black Wire, (4) White Wire, (5) Ground Wire, (6) Box Screw, (7) Mounting Screw, (8) Hex Nut, (9) Mounting Bar, (10) Ground Screw, (11) Canopy, (12) Ball Nut, (13) Ball Nut, (14) Socket, (15) Bulb, (16) Aluminum Shade.

1. Secure the mounting bar (9) with box screws (6) to the outlet box (1).
2. Pull out the outlet wire and ground wire from the outlet box. Make wire connections with Wire Connector (2):
   • Black wire from light to Black wire (3) from power source.
   • White wire from light to White wire (4) from power source.
   • Loop the ground wire (5) to mounting bar (9) with a ground screw (6).
3. Attach the canopy (11) against the outlet box (1), secure with the ball nut (12) onto the mounting screw (7).
4. Loosen the ball nut (13), insert the bulb (15) into socket (14). After that, put the bulb into the shade (16). Finally, screw up the ball nut.

DO NOT USE BARE HANDS TO TOUCH THE BULB.

INSTALLATION IS NOW COMPLETE