The Professional Presenter

WARNING

This product can generate laser beam. DO NOT STARE INTO BEAM OR EXPOSE USERS OF TELESCOPIC OPTICS. Do not shine the laser beam on people's or animal's eyes to avoid eye damage! Do not give this product to children as a toy!

Warning label for red laser product:

Description of labels: Contains text indicating LASER RADIATION, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT, WAVELENGTH: 640-660nm, MAX OUTPUT: <1mW CW, and also text indicating LASER RADIATION, AVOID DIRECT EYE EXPOSURE, CLASS 3R LASER PRODUCT, WAVELENGTH: 640-660nm, MAX OUTPUT: <5mW CW.

Warning label for green laser product:

Description of labels: Contains text indicating LASER RADIATION, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT, WAVELENGTH: 495-545nm, MAX OUTPUT: <1mW CW, and also text indicating LASER RADIATION, AVOID DIRECT EYE EXPOSURE, CLASS 3R LASER PRODUCT, WAVELENGTH: 495-545nm, MAX OUTPUT: <5mW CW.

I. Features

1. Support previous page, next page. Click the [page up] key to go backward to previous page, long press to play slides from the current page. Click the [page down] key to go forward to the next page, long press to go into the black screen.
2. Full support for PowerPoint, Keynote, and Prezi. The function of the wireless Presenter can be freely switched between the up and down arrows, left and right arrows, and Page Down/Up on the computer keyboard.
3. Integrated design, the USB receiver can be easily stored at the rear of the wireless presenter, making it easy to carry and plug and play.
4. Support wireless presenter to connect to the computer via Bluetooth, without the need to plug in a USB receiver during operation.
5. Supports hyperlink function. Pressing the Tab key is equivalent to the Tab key, double clicking the Tab key is equivalent to the Enter key and holding the Tab key is equivalent to the Alt-Tab key.
6. The product has a 300mAh lithium battery, USB-C charging port. It can be charged by computer USB port and mobile phone charger to avoid the trouble of changing batteries.
7. Supports USB 2.0 version, uses operation system universal USB driver, plug and play.
8. The page up/down keys can be customized by Norwii Presenter software. The firmware of the USB receiver is updatable.

II. Operation System

Support Windows 7/8/10/11 and macOS 10.15 or later. Only supports laser and page up/down on Android & Linux.

III. Bluetooth Connectivity

USB receivers have higher priority than computer Bluetooth. After connecting the wireless presenter to the computer via Bluetooth, plugging in the USB receiver will cause the wireless presenter to disconnect from the computer via Bluetooth and establish a connection with the USB receiver. Pulling out the USB receiver will automatically connect the wireless presenter to the computer via Bluetooth. The wireless presenter cannot be paired with the computer via Bluetooth when the USB receiver is plugged in.

1. Bluetooth Connection on Windows Computer

1. On the computer, turn on the Bluetooth switch, click "Add Device", and select Bluetooth as the device type.
2. Turn off the power of the wireless presenter, press and hold the wireless presenter's [page up] key, turn on the wireless presenter's power switch, then release the [page up] key. The wireless presenter's [LED indicator] will flash, indicating it is waiting for pairing for the next 3 minutes. The [LED indicator] will be off after successful connection.
3. On the computer, find "Norwii presenter" or "Norwii N95 BLE" in "Add device", click connect. The presenter's indicator light will be off, and it will display "Norwii presenter" or "Norwii N95 BLE" connected in "Bluetooth & device". The presenter can now control the computer.
4. The Bluetooth of the wireless presenter only saves the last connected device (computer, iPad, mobile phone, etc.). When the wireless presenter turns on next time, it will automatically connect to the last connected device. If the wireless presenter is first paired with computer A, and then paired with computer B, turning on the wireless presenter next time will automatically connect to computer B, not computer A. To reconnect to computer A, remove the wireless presenter from computer A's settings (e.g., "Settings - Bluetooth & device") and then pair again.

2. Bluetooth Connection on macOS Computer

1. On the computer, select Bluetooth in the computer System Settings and turn on the Bluetooth switch.
2. Turn off the power of the wireless presenter, press and hold the wireless presenter's [page up] key, turn on the wireless presenter's power switch, then release the [page up] key. The wireless presenter's [LED indicator] will flash, indicating it is waiting for pairing for the next 3 minutes. The [LED indicator] will be off after successful connection.
3. On the computer, find "Norwii presenter" or "Norwii N95 BLE" on "Nearby Devices", click connect. The presenter's indicator light will be off, and it will display "Norwii presenter" or "Norwii N95 BLE" connected in "My Computer". The presenter can now control the computer.
4. The Bluetooth of the wireless presenter only saves the last connected device. When the wireless presenter turns on next time, it will automatically connect to the last connected device. If paired with computer A first, then computer B, it will connect to computer B. To reconnect to computer A, click "Forget This Device" in "Launchpad - System settings - Bluetooth - My Devices" to remove the wireless presenter from computer A, and then pair with computer A again.

IV. Package Contents

• Wireless presenter * 1 (USB receiver stored inside the wireless presenter)
• User Manual * 1
• USB-C charging cable * 1

V. Specifications

Transmitter

• Technology: Radio frequency
• Frequency: 2.4GHz
• Control Distance: 100 meters
• Laser Power: <1mW (Class 2) or <5mW (Class 3R), see the laser label on the back of the presenter.
• Laser Distance: >200m
• Wavelength (Red): 640-660nm
• Wavelength (Green): 495-545nm
• Battery capacity: 300mAh lithium battery
• Working Voltage: 3.6-4.2V
• Charging Voltage: 5V
• Dimension: 131*29*12.5mm
• Weight: 30.8g

USB Receiver

• Working Voltage: 4.5-5.5V
• Dimension: 22.7*14*7.6mm
• Weight: 2.1g

VI. Function Map

Visual description of the presenter's layout:

• [LED indicator]: Located near the top.
• Laser hole: Located at the top.
• Buttons:
  • [previous page] button: For page up. Long press for full screen/Esc.
  • [next page] button: For page down. Long press for black screen/Esc.
  • [laser button] (*): For activating the laser.
• [Power switch]: Located on the side.
• [USB-C charging port]: Located at the bottom.
• [USB receiver]: Located at the bottom (when stored).
• Side buttons:
  • Tab button: Functions include Tab, and long press for Alt-Tab window switching.
  • Enter button: Functions include Enter, and long press for Alt-F4 to close the window.

Attention: When using this product, please change your Input Method (IME) to English input mode.

VII. Function Description

1. Power switch: Push up to "ON" to turn on the presenter, push down to "OFF" to turn off the presenter.
2. Page up key ([<]): Click to page up. Long press to play slides from the current page. Long press again to end the slide show.
3. Page down key ([>]): Click to page down. Long press to enter black screen, long press again to exit black screen.
4. Physical laser key ([*]): Press and hold to turn on the physical laser beam, and release to turn off the physical laser beam.
5. Hyperlink operation: Press the Tab key to switch between hyperlinks on the page, and press the Enter key to open the hyperlink. Long press the Enter key to execute Alt-F4 to close the current active window. When switching windows, press and hold the Tab key to execute the Alt-Tab function to switch between open windows. Release the button on the window that needs to be switched to switch to the desired window.
6. The wireless presenter fully supports PowerPoint, Keynote, Prezi, and other commonly used software. It supports page up and page down keys' function switching. By default, the page up and page down keys correspond to the up and down arrows on the computer keyboard.
   • For PowerPoint and Keynote: Supports page up and page down.
   • For Prezi: Pressing the page up and page down keys simultaneously switches the function to the left and right arrows on the computer keyboard.
   • For internet browser and Microsoft Photo software: Pressing the page up and page down keys simultaneously a second time switches the function to Page Up and Page Down.
   • Pressing the page up and page down keys simultaneously a third time switches the function back to the default up and down arrows on the computer keyboard.
7. The page up/down keys can be customized by Norwii Presenter software.

VIII. Installation

1. Install the USB receiver: Remove the USB receiver from the lower part of the wireless presenter and plug it into the USB interface of the computer. The computer's desktop will display "Discovered New Hardware" in the bottom right corner, and the system will automatically install the driver. When Windows displays "New hardware installed and ready to use", it indicates that the USB receiver installation is complete.
2. Control the wireless presenter by operating the keys of the presenter.
3. Turn off the wireless presenter. After use, please return the USB receiver to the presenter's original position and turn off the power switch to further save power.

IX. Wireless Presenter Charging

1. Low power indication: The blue [LED indicator] on the wireless presenter will flash slowly to remind the user to charge the presenter.
2. Charging the wireless presenter: Connect one end of the USB cable to the computer USB interface and the other end to the [USB-C port] of the wireless presenter. When charging, the red indicator light will always be lit. When the red indicator light turns green, it indicates that the wireless presenter is fully charged. A USB-C interface handheld charger can also be used.
3. Charging time: The charging time varies depending on the power supply of the USB interface. Normally, charging can be completed after about 2 hours.

X. Frequently Asked Questions

1. How to download Norwii Presenter software and pair the presenter and USB receiver?
   For products supporting key function customization or highlight serial products (digital laser, highlight, magnifier), download the Norwii Presenter software from the "Downloads" section under the "Support" menu on the official Norwii website (www.norwii.com).
2. How to know if the battery is out of power?
   Turn on the presenter and press the [laser key] to check if the laser turns on. If it does not turn on, the battery is likely out of power or the laser diode needs replacement. If other buttons are pressed and the [LED indicator] does not light up, the battery is also low. Charge the presenter promptly. When the battery level is low, the [LED indicator] will enter a slow flashing state.
3. Why does the laser pointer not work?
   If the laser does not light up, please check:
   1. Is the power switch turned on? If not, turn it on.
   2. Check if the wireless presenter has low power. If the [LED indicator] flashes slowly, the battery needs charging.
   3. If other functions are normal but the laser is not on, the laser module may be broken and requires replacement.
4. What to do if the laser becomes dim?
   Laser dimming is usually due to low battery power. If the laser beam remains only a red dark spot after full charge, the laser module may be aging. Contact support for repair.
5. Why does the computer not detect the device when the USB receiver is plugged in?
   Check if the USB port works. Use a USB mouse or keyboard to test the port. If other USB devices work on the port but the presenter's USB receiver does not, the receiver may be broken or incompatible with the USB drivers. Try another USB port on the same or a different computer. If it works on another computer, the issue might be with the original computer's USB drivers. Back up data and reinstall the OS if necessary.
6. Special tips for charging:
   The product supports standard 5V charging only and does not support QC quick charging. Charging with a voltage higher than 5V may damage the product or prevent charging.
7. The laser is ok, and the USB receiver is detected by the computer, but why does the presenter not control the computer?
   The USB receiver may not have saved the presenter's address properly. Use the Norwii Presenter software to save the presenter's address again. This process is also known as pairing the wireless presenter and the USB receiver.
8. How to adjust the settings for Norwii Presenter on macOS?
   On macOS, the Norwii Presenter software requires three permissions: Accessibility, Input Monitoring, and Screen & System Audio Recording. If not set, click "Grant Permissions" in the "About" tab of the software. Then, open the corresponding permission settings in the window that appears. You can also verify these settings in "Launchpad - System settings - Privacy & Security - Accessibility, Input Monitoring, Screen & System Audio Recording".

XI. Certifications

• CE, ROHS, FDA
• FCCID: 2AXGRN95
• Declaration of conformity: This laser product complies with IEC/EN60825-1:2014 and 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No.50, dated June 24, 2007.

XII. Product Support

Shanghai Norwii Technology Co., Ltd.

Add: 2F, Building 3, No 277, Jinfeng Road, Pudong New Area, Shanghai 201201, P. R. China

Tel: 86-21-51872080

Email: support@norwii.com