The Professional Presenter

Be sure to read this user manual carefully before using the wireless presenter and keep it for future reference.

⚠️ WARNING

This product can generate laser beam. DO NOT STARE INTO BEAM OR EXPOSE USERS OF TELESCOPIC OPTICS. Do not shine the laser beam on people's or animal's eyes to avoid eye damage! Do not give this product to children as a toy!

Warning labels:

For red laser product:

• Class 2 Laser Product: LASER APERTURE, IEC/EN 60825-1:2014. LASER RADIATION DO NOT STARE INTO BEAM WAVELENGTH: 640-660nm MAX OUTPUT: <1mW CW
• Class 3R Laser Product: LASER APERTURE, IEC/EN 60825-1:2014. LASER RADIATION AVOID DIRECT EYE EXPOSURE WAVELENGTH: 640-660nm MAX OUTPUT: <5mW CW

For green laser product:

• Class 2 Laser Product: LASER APERTURE, IEC/EN 60825-1:2014. LASER RADIATION DO NOT STARE INTO BEAM WAVELENGTH: 495-545nm MAX OUTPUT: <1mW CW
• Class 3R Laser Product: LASER APERTURE, IEC/EN 60825-1:2014. LASER RADIATION AVOID DIRECT EYE EXPOSURE WAVELENGTH: 495-545nm MAX OUTPUT: <5mW CW

I. Features

• Support previous page, next page. Click the page up key [⬆️] to go backward to previous page, long press to play slides from the current page. Click the down page key [⬇️] to go forward to the next page, long press to go into the black screen.
• Full support for PowerPoint, Keynote, and Prezi. The function of the wireless Presenter can be freely switched between the up and down arrows, left and right arrows, and Page Down/Up on the computer keyboard.
• Integrated design, the USB receiver [?] can be easily stored at the rear of the wireless presenter, making it easy to carry and plug and play.
• Support setting the volume of music.
• Supports hyperlink function. Pressing the Tab key is equivalent to the Tab key, double clicking the Tab key is equivalent to the Enter key, and holding the Tab key is equivalent to the Alt Tab key.
• The product has a 360mAh lithium battery and a USB-C charging port. You can charge it by computer USB port and mobile phone charger to avoid the trouble of changing batteries.
• Supports USB 2.0 version, uses operation system universal USB driver, plug and play.
• The page up/down keys can be customized by Norwii Presenter software. The firmware of the USB receiver is updatable.

II. Operation system

Support Windows 7/8/10/11 and macOS 10.15 or later, only support laser [?] and page up/down [⬆️]/[⬇️] on Android & Linux.

III. Package contents

• Wireless presenter * 1 (USB receiver [?] stored inside the wireless presenter)
• User Manual * 1
• Micro USB charging cable [?] * 1

IV. Specifications

Transmitter

USB receiver

V. Function map

Model: N76

LED Indicator [?]:

Presenter Body:

• Page Up Button [⬆️]: Click to page up. Long press to play slides from the current page or end the slide show.
• Page Down Button [⬇️]: Click to page down. Long press to enter black screen or exit black screen.
• Laser Button [?]: Press and hold to turn on the laser beam, release to turn off. Functions: Click = Tab, Double click = Enter, Keep pressing = Alt+Tab.

Other Components:

• On/Off Switch: [▶️]/[0️⃣] Controls power.
• Pen Clip: For attaching the presenter.
• Volume + Button [➕]: Increases volume.
• Volume - Button [➖]: Decreases volume.
• USB Recharging Port [?]: For charging the device.
• USB Receiver [?]: Connects to the computer.

Attention: When using this product, please change your Input Method Editors (IME) to English input mode.

VI. Function Description

1. Power switch: Push up to "ON" [▶️] to turn on the presenter, push down to "OFF" [0️⃣] to turn off the presenter.
2. Page up key [⬆️]: Click to page up, long press to play slides from the current page. Long press again to end slide show.
3. Page down key [⬇️]: Click to page down, long press to enter black screen, long press again to exit black screen.
4. Physical laser key [?]: Press and hold to turn on the physical laser beam, and release to turn off the physical laser beam.
5. Volume key: Press "+" [➕] to up the volume, and "-" [➖] to down the volume. Long press will continuously up or down the volume.
6. Hyperlink operation: Press the "Tab" key to switch between hyperlinks on the page, and press the "Enter" key to open the hyperlink. Long press the 'Enter' key to execute Alt-F4 to close the current active window.
7. When switching windows, press and hold the "Tab" key to execute the Alt Tab function to switch between open windows. Release the button on the window that needs to be switched to switch to the desired window.
8. The wireless presenter fully supports PowerPoint, Keynote, Prezi and other commonly used software. It supports page up and page down keys' function switching. The page up and page down keys correspond to the function of the up and down arrows on the computer keyboard by default and it supports page up and page down for PowerPoint and Keynote. For the first time when you press the page up and page down keys simultaneously, the function will be switched to the left and right arrows on the computer keyboard, supporting page up and page down for Prezi. For the second time when you press the page up and page down keys simultaneously, the function will be switched to the Page Up and Page Down on the computer keyboard, supporting page up and page down for internet browser and Microsoft Photo software. For the third time when you press the page up and page down keys simultaneously, the function will be switched to the default up and down arrows on the computer keyboard.
9. The page up/down keys can be customized by Norwii Presenter software.

VII. Installation

1. Take out the USB receiver [?] and install: Remove the USB receiver from the lower part of the wireless presenter, and then plug it into the USB interface [?] of the computer. At this time, the bottom right corner of the computer desktop will display "Discovered New Hardware", and the system will automatically install the driver. When Windows displays "New hardware installed and ready to use", it indicates that the USB receiver installation is complete.
   • Diagram 1: Shows the USB receiver being removed from the presenter. Text: (Take out the USB receiver).
   • Diagram 2: Shows the USB receiver being inserted into a computer USB port. Text: (The USB receiver into the computer USB port).
2. Control the wireless presenter by operating the key of the flip pen.
3. Turn off the wireless presenter: After use, please return the USB receiver [?] to the presenter's original position and turn off the power switch [0️⃣] to further save power.
   • Diagram: Shows the power switch being moved to the "OFF" position. Text: turn off the power switch.

VIII. Wireless presenter charging

1. Low power indication [?]: The blue LED on the wireless presenter will flash slowly to remind the user to charge the presenter.
2. Charging the wireless presenter: Connect one end of the USB cable to the computer USB interface [?] and the other end to the Micro USB interface [?] of the wireless presenter. When the wireless presenter charges, the red indicator light always lights up. When the red indicator light turns green, it indicates that the wireless presenter is fully charged. If you have a mobile phone charger, it can also be used to charge wireless presenters. The charging time varies depending on the power supply of the USB interface. Normally, charging can be completed after about 2 hours of charging.
   • Diagram: Illustrates the charging connection, showing the Micro USB port of the wireless presenter and the PC's USB Port. Text labels: "Micro USB port of wireless presenter", "PC'S USB Port", "recharging the wireless presenter via PC".

IX. Frequently Asked Questions

1. How to download Norwii Presenter software and how to pair the presenter and the USB receiver [?]? For products that support key function customization or highlight serial products that support digital laser [?], highlight, magnifier, you need to download Norwii Presenter software. Please download it from the "Downloads" under the "Support" menu of Norwii official website www.norwii.com in English version.
2. How to know if the battery is out of power [?]? Turn on the power of the presenter, then press the laser key [?] to check if the laser can be turned on. If the laser cannot be turned on, usually it means the battery is out of power or the laser diode is dead and needs replacement. If other keys are pressed and the LED [?] doesn't flash, it means the battery is out of power. If the LED [?] on the wireless presenter starts to flash slowly, it means the power is low and the battery needs to be charged.
3. Why does the laser pointer [?] not work? The laser does not light up, please check: 1) Is the power switch [▶️]/[0️⃣] turned on? If not, turn on the power. 2) Check whether the wireless presenter is in low power or out of power. If the LED [?] flashes slowly, it means the power is low and the battery needs to be charged. 3) If other functions of the wireless presenter are normal and only the laser [?] is not on, it indicates that the laser module is broken and needs replacement.
4. What to do if the laser [?] becomes dim? Laser dimming is generally due to low battery power and the need for timely charging. If the laser beam remains only a red dark spot after being fully charged, it indicates that the laser module is aging. When the laser module ages, please contact Shanghai Norwii Technology Co., Ltd. for after-sales repair.
5. Why does the computer not detect the device when the USB receiver [?] plugs into the PC? Please check whether the USB [?] works or not. You can use a USB mouse or keyboard to test the USB port. If a USB mouse or keyboard works on the USB port and the USB receiver of the presenter doesn't work, it means the USB receiver is broken or the USB drivers are not compatible with the USB receiver. You can try another USB port of the same computer or USB ports of another computer to check whether the USB receiver is good or not. If it works on other computer, it means the USB drivers of the computer are not compatible with the USB receiver. You need to back up your data and reinstall the OS.
6. How to calibrate? Calibration is required when you do not move the wireless presenter, but the mouse cursor keeps moving in one direction until it stops at the edge of the screen. Another situation is when moving the product horizontally or vertically, and there is an angle between the movement direction and the horizontal or vertical direction, calibration operations need to be carried out. Simply put, when you move the product horizontally, and the mouse cursor on the computer does not move horizontally, which requires calibration. The purpose of calibration is to provide a horizontal and vertical reference for the product. Place the product on a horizontal and stable surface, press and hold the page down key [⬇️] and turn on the power [▶️]. The blue LED [?] will flash to indicate entering calibration mode. At this point, release both hands and try to keep the product level as much as possible. The blue LED [?] flashes for 3 seconds before stopping flashing, and remains on for 5 seconds before turning off, indicating that calibration is complete.
7. Special tips for charging: The product only supports standard 5V charging and does not support all kinds of QC quick charging. Charging with a voltage higher than 5V will burn the product or fail to charge.
8. The laser [?] is ok, and the USB receiver [?] can be detected by the computer, why does the presenter control the computer? The reason is the USB receiver doesn't save the presenter's address properly. You can use Norwii Presenter software to let the USB receiver save the presenter's address again. This operation is also called PAIRing the wireless presenter and the USB receiver [?].
9. How to adjust the settings for Norwii Presenter on macOS? On Apple's macOS, the Norwii Presenter software requires three permissions: Accessibility, input monitoring, Screen & System Audio Recording. If it has not been set before, please click "Grant Permissions" in the "About" tab of the Norwii Presenter software, and then open the corresponding permission settings in the window that opens. You can also check the box in front of the Norwii Presenter software in the above three permission settings in the "Launchpad - System settings - Privacy & Security - Accessibility, input monitoring, Screen & System Audio Recording" of macOS.

X. Certifications

• CE, ROHS, FDA
• FCCID: 2AXGRN95
• Declaration of conformity: This laser product complies with IEC/EN60825-1:2014. Complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No.50, dated June 24, 2007.

XI. Product Support

Shanghai Norwii Technology Co., Ltd.

Add: 2F, Building 3, No 277, Jinfeng Road, Pudong New Area, Shanghai 201201, P. R. China

Tel: 86-21-51872080

Email: support@norwii.com