PAPIFEED Smart Pet Feeder User Manual
Thank you for choosing PAPIFEED. Please read this manual carefully and keep it for future reference.
Daily Feeding Guidelines
The following tables provide recommended daily feeding amounts for dogs and cats based on weight, normal feeding, and increased feeding needs (e.g., activity levels).
Dog Feeding Guide
| Dog Weight | Normal Feeding | Increase Feeding |
|---|---|---|
| 2kg | 39g | 45g |
| 4kg | 66g | 76g |
| 6kg | 89g | 104g |
| 8kg | 111g | 128g |
| 10kg | 131g | 152g |
| 12kg | 150g | 174g |
| 14kg | 178g | 206g |
| 16kg | 197g | 228g |
| 18kg | 197g | 228g |
| 20kg | 233g | 270g |
| 22kg | 250g | 290g |
| 24kg | 267g | 309g |
| 26kg | 274g | 318g |
| 28kg | 290g | 336g |
| 30kg | 305g | 353g |
| 32kg | 320g | 371g |
| 34kg | 335g | 388g |
| 36kg | 350g | 405g |
| 38kg | 364g | 422g |
| 40kg | 379g | 439g |
| 42kg | 393g | 455g |
| 44kg | 407g | 471g |
Cat Feeding Guide
| Cat Weight | Suggest Feeding (Normal) | Suggest Feeding (Lactation/Pregnancy) |
|---|---|---|
| 2-3kg | 25-35g | 70-110g |
| 3-5kg | 35-55g | 120-190g |
| 5-7kg | 55-85g |
Note: If your pet does not finish the previous meal, please reduce the portion size for the next meal.
Component Breakdown
The Smart Pet Feeder consists of the following parts:
- Lid
- Desiccant Holder
- Dry Bag Compartment
- Food Tank
- Main Frame
- Panel
- Dispensing Outlet
- Stainless Steel Feeding Bowl
A diagram illustrates the feeder with these components labeled. The desiccant is used to keep the food fresh.
Product Specifications
- Product Name: Smart Pet Feeder
- Suit For: Cat, Dog, Rabbit, Squirrel, Small Pets
- Rated Voltage: 5V 1A
- Product Power: 5W
- Power Supply: DC 5V Adapter & 4*AA Alkaline Battery
- Material: Echo-Friendly ABS
- Product Size: 208*148*277mm (8.2*5.8*10.9in)
- Product Weight: 1kg (2.2lb)
- Product Capacity: 3.5L
- Pet Food: Dry Food
- Portion Size: Approx. 20g/Portion (may vary based on food density)
Product Hardware Assembly Steps
- Installation of Food Tank: Place the food tank onto the main frame.
- Power Supply Connection:
- Connect using the provided DC 5V adapter.
- Alternatively, insert 4 AA alkaline batteries.
- It is recommended to use both power sources simultaneously. The batteries serve as a backup in case of a power outage.
- Pouring Grain: Add dry pet food into the food tank. Ensure the food is suitable (5-10mm kibble size, not wet or canned food).
- Install the Safety Lock: Secure the lid with the safety lock.
Diagrams show the assembly process, including connecting power and installing the safety lock.
Basic Interface Understanding
The feeder's interface displays key information:
- Current Time: Shows the current time.
- Battery Status: Indicates the battery level (flashing when low).
- Meal Setting: Displays the programmed meals (e.g., P-01, P-02).
Buttons:
- [+] Button: Increases values. Long press to increase continuously.
- [-] Button: Decreases values. Long press to decrease continuously.
- [Set/Save Button]: Short press to switch parameters or save data. Long press to enter time setting.
- [Manual Feed Button]: Long press for 2 seconds to dispense one portion manually.
Setting Feeding Schedule
Follow these steps to set feeding times and portions:
- Enter Meal Setting: From the main interface, short press the [Set/Save Button] to enter the meal setting interface. You can set up to 4 meals (e.g., -01- to -04-).
- Set Time:
- Long press the [Set/Save Button] for 3 seconds on the main interface to set the current time.
- Press the [Set/Save Button] again to set the hours. Use [+] or [-] to adjust, long press for faster adjustment.
- Press the [Set/Save Button] to set the minutes. Use [+] or [-] to adjust.
- Press the [Set/Save Button] to save and return to the main interface.
- Set Meal Portions:
- Short press the [Set/Save Button] on the main interface to set the number of meals, meal time, and portions per meal.
- Navigate through meal settings (-01-, -02-, etc.) using the [Set/Save Button].
- Set the desired time for each meal using [+] and [-].
- Set the number of portions for each meal using [+] and [-]. Setting portions to 0 means no food for that meal.
- Press the [Set/Save Button] to confirm and save settings. A '----' prompt indicates saving is complete.
A visual guide shows the sequence of setting meal times and portions.
Manual Feeding
To dispense food manually, long press the [+] button for 2 seconds. One portion will be dispensed.
Product Disassembly & Cleaning
Washable Parts: Safety Lock, Feeding Bowl, Stainless Steel Feeding Plate.
Non-Washable Parts: The main feeder unit (host). The food tank is not detachable for cleaning but can be emptied by pressing a key to release food from the hopper. Wipe the dispensing outlet and inner wall regularly.
Note: Do not wash the entire feeder unit. Clean the washable parts with mild soap and water, ensuring they are completely dry before reassembly.
Q&A Trouble Shooting
- Q: No food dispensing?
A: Check if there is food in the hopper, check for error indicators on the screen, and ensure you are using non-sticky dry food.
- Q: Pet safety with power cord?
A: The feeder uses a 5V safety voltage, posing no electrocution risk to pets.
- Q: Why is the food hopper not detachable for washing?
A: The non-detachable design simplifies the internal structure. Food can be released via a key, and the dispensing outlet and inner wall can be wiped clean to maintain freshness.
After Sales Service
PAPIFEED offers a 1-year warranty for this appliance. For any questions or issues, please email the support team at service@papifeed.cn, including your order number and a description of the problem. Support will respond within 24 hours.
