Welcome to Orbit B-hyve Quick Start Guide

Contents

• Hose Faucet Timer
• Quick Start Guide

1) Open the B-hyve App

Log into your B-hyve account and tap "My B-hyve". Go to "devices" then "add device". The app will guide you through the rest of the process.

For new users, search for the "B-hyve" app and download the free Android or iOS app. Create an account to begin setup.

? Get it on Google Play

? Download on the App Store

2) Power Your Hose Faucet Timer

Insert two new AA Batteries* (sold separately). The timer will enter pairing mode and flash a blue light every 5 seconds.

You will hear two clicks approximately 6 seconds apart. This is normal and ensures the valve is closed before you turn on the water.

Write down the MAC address: a 12-digit alphanumeric code found on the bottom of the timer.

Timer MAC Address: ____________________

? If you need to re-pair or perform a factory reset, press the on/off button quickly 5 times.

*Replace batteries when the timer flashes a red light every 5 seconds, or when the app notifies you that batteries need replacing.

⚠️ If you remove or change the batteries, you will need to reconnect via Bluetooth® to set the correct time and date.

3) Install the Timer

Your timer is now ready to be attached to any product that connects to a standard hose faucet.

❌ Do not place the timer in an underground valve box.

4) Turn on Your Water

The water supply must remain on for the timer to function correctly.

Manual Watering

To activate manual watering, simply press and hold the on/off button for 5 seconds.

Stop Watering

Need to stop watering, even during a programmed cycle? Press the on/off button once to stop watering.

Timer Specifications

• Range: 150 ft without interference
• Pressure Operating Range: 10-100 PSI
• Temperature Operating Range: 32°F-158°F (0-70°C)
• For Outdoor Use With Cold Water Only
• Not For Use With Appliances
• Do Not Mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel Cadmium) Batteries.
• Used up or dead batteries must be removed from the timer and disposed of properly.
• Do not dispose of batteries in fire. Batteries may explode or leak.

FCC Statement

FCC ID: ML6HT25ASR

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

⚠️ FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

This device meets the FCC and IC requirements for RF exposure in public or controlled environments. The end user is advised to maintain a distance of 20 cm from the timer and any personnel to ensure compliance with RF exposure regulations.

IC Statement

IC: 3330A-HT25ASR

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003.

French Translation (Information de conformité pour le Canada): Cet appareil est conforme aux exigences de la FCC et de l'IC concernant l'exposition aux ondes dans un environnement public ou contrôlé. Il est conseillé à l'utilisateur final de maintenir une distance de 20 cm du contrôleur pour assurer la conformité aux réglementations d'exposition RF. Cet appareil est conforme à la norme RSS d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit tolérer toutes les interférences, dont les interférences pouvant causer un fonctionnement non désiré. Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003.

Need Help?

If you encounter a problem, please use the following resources before returning your B-hyve to the store.

• Call Us: 1-801-299-5555
• Email Us: support@orbitbhyve.com
• Text Us: 801-905-8260

Or visit us at: orbitonline.com

Scan the QR Code for access to a full user manual, videos, and more.