Aiwa CR-30BK Alarm Clock Radio
01. What's in the Box?
- Aiwa CR-30BK Alarm Clock Radio
- Power Adapter
- User Manual (this guide)
02. Overall View
- 1. Wireless Charging Pad
- 2. MEM/M+ Button / SET Button
- 3. BACKWARD Button
- 4. FORWARD Button
- 5. SNOOZE Button / SLEEP Button / DISPLAY DIMMER Button
- 6. ALARM 1 Button / VOL DOWN Button / ALARM OFF Button
- 7. ALARM 2 Button / VOL UP Button / ALARM OFF Button
- 8. RADIO ON/OFF Button
- 9. Wireless Charging Status Indicator
- 10. Low Battery Indicator
- 11. Display
- 12. ALARM 1 Indicator
- 13. ALARM 2 Indicator
- 14. NIGHT LIGHT Button
- 15. DC IN Jack
- 16. USB Charging Port
- 17. Antenna
- 18. Battery Compartment
- 19. Speaker
- 20. Night Light Lens
03. Connection to the Mains
Connect the power adapter to the [DC IN Jack] [15] on the back of the unit and plug the adapter into a wall socket.
04. Setting the Time
In standby mode:
Press and hold the [BACKWARD] button [3] to set the minute time.
Press and hold the [FORWARD] button [4] to set the hour time.
05. Access to the FM Radio Mode
Press the [RADIO ON/OFF] button [8] to turn the radio on.
Press the [MEM/SET] button [2] repeatedly to cycle through modes until FM is displayed.
06. Setting Preset Stations (10 Preset Stations)
While listening to the radio:
Press and hold the [MEM/SET] button [2] to store the current station as a preset.
Use the [FORWARD] [4] and [BACKWARD] [3] buttons to select the preset number (P01-P10).
07. Using the Alarms (Alarm 1 / Alarm 2)
To set Alarm 1: Press the [ALARM 1] button [6]. The [ALARM 1 INDICATOR] [12] will light up. Use the [FORWARD] [4] and [BACKWARD] [3] buttons to set the hour and minute. Press the [ALARM 1] button [6] again to confirm. Repeat for Alarm 2 using the [ALARM 2] button [7] and [ALARM 2 INDICATOR] [13].
08. Turning the Alarms On/Off
To turn an alarm on or off, press the respective alarm button ([ALARM 1] [6] or [ALARM 2] [7]). The indicator light [12 or 13] will show if the alarm is active.
09. Deactivating a Sounding Alarm
When the alarm sounds, press the [SNOOZE/SLEEP/DIMMER] button [5] for snooze, or press the [ALARM OFF] button ([6] or [7]) to turn it off completely.
10. Sleep Function
When the radio is switched on, press the [SNOOZE/SLEEP/DIMMER] button [5] repeatedly to select a sleep timer duration (OFF, 10, 20, 30, 40, 50, 60, 70, 80, 90 minutes).
11. Wireless Charging (Phones and AirPods)
Place a compatible phone or AirPods case on the [WIRELESS CHARGING PAD] [1].
Warning: Remove metal protective or magnetic cases from your device before charging. Do not place metallic objects on the charger during use.
Indicator Status:
- Green LED lit continuously: Device is charging properly.
- Green LED off: Device is charged.
- Red LED blinking quickly: Device is not charging properly. Reposition the device.
12. Display Brightness
In standby mode, press the [SNOOZE/SLEEP/DIMMER] button [5] repeatedly to adjust the display brightness.
13. Night Light Function
Press the [NIGHT LIGHT] button [14] to turn the night light on or off.
14. Charging External Devices
Connect your device to the [USB CHARGING PORT] [16] using a suitable cable.
15. Backup System
The unit uses a 3V Lithium Battery, type CR2032, for backup power.