Aiwa CR-15 Dual Alarm Clock with AM/FM PLL Radio
Brand: Aiwa
Model: CR-15
Product Type: Clock Radio
01. What's in the Box?
The package typically contains the Aiwa CR-15 clock radio and a quick guide.
02. Overall View
This clock radio features a backup system that requires 2 alkaline batteries (LR03/AAA) to ensure the clock and timer settings function during a power failure.
Key Components:
- Display showing time (e.g., 19:51)
- Various buttons for control: BAND, MEM, HOUR, SET, SLEEP, VOLUME, TUNING, SNOOZE
03. Connection to the Mains
Connect the clock radio to the main power supply.
04. Setting the Time
To set the time, confirm each selection (hours, minutes) by pressing the SET button.
Example: Set time to 19:51.
05. Basic FM Radio Mode Controls
Basic Operations:
- Turn the radio ON: Press the power button.
- Change Radio Band: Use the BAND button to switch between FM and AM.
- Manual Tuning: Use the TUNING buttons (▲/▼) to adjust the frequency.
- Auto Tuning: Press and hold the TUNING button (▲/▼) for auto-seek tuning.
- Turn the radio OFF: Press the power button again.
Other Functions:
- SNOOZE FUNCTION: Press the SNOOZE button to temporarily silence the alarm.
- SLEEP TIMER: Set a timer for the radio to turn off automatically.
- PRESET STATION: Store and recall favorite radio stations.
- LED DISPLAY: White LED display for time and radio information.
06. Volume (FM Radio)
Adjust the volume using the VOLUME buttons (▲/▼).
07. Set and Rewrite the Preset Radio Stations
To set a preset station: Tune to the desired station, press MEM, then press a preset number (1-5) to save it. To recall a preset station, press the corresponding preset number.
08. Recall Presets
Press the preset number buttons (1-5) to recall saved radio stations.
09. Sleep Function
Set the sleep timer by pressing the SLEEP button. The display will show the selected sleep duration (e.g., 90 minutes).
10. Set the Alarm
To set an alarm: Press the ALARM button, set the desired hour and minute using HOUR and MINUTE buttons, and confirm by pressing ALARM again. Ensure the alarm is activated (indicated on the display).
Note: For the alarm to function, press the ALARM button to activate it. The alarm icon will appear on the display.
11. Switch Off the Alarm
When the alarm sounds, press the SNOOZE button for a temporary pause or the ALARM OFF button to turn it off completely.
12. Snooze Function
Press the SNOOZE button when the alarm is sounding to activate the snooze feature. The alarm will sound again after a short interval.
13. Check the Alarm Time
Press the ALARM button to view the currently set alarm time.