Takstar PC-K220USB Digital Recording Microphone
Introduction
Thank you for purchasing the Takstar PC-K220USB digital recording microphone. This manual provides comprehensive information to help you understand and use the product effectively. For any questions or suggestions, please contact the Takstar official service hotline at 4006828333 or follow the official Takstar WeChat account.
Product Features
- Digital recording microphone designed for live streaming, online broadcasting, post-dubbing, and singing/playing recording.
- Built-in USB sound card chip, compatible with Windows, iOS, and Mac systems; driver-free, plug-and-play.
- Cardioid condenser capsule for sensitive pickup, high sound pressure, and detailed sound reproduction.
- Independent microphone and headphone volume control knobs for easy adjustment of input gain and output volume.
- Ultra-low latency monitoring for real-time listening to recording effects.
- Operation indicator light for clear status indication.
- Durable zinc alloy body.
- Includes microphone clip, tripod stand, and windscreen for convenient use.
Application Scope
Live streaming, online broadcasting, post-dubbing, singing/playing recording, etc.
System Requirements
Compatible with Windows 7/8/10, macOS 10.9, and iOS 12 and above. For optimal compatibility and user experience, updating to the latest system version is recommended.
Package Contents
- Microphone: 1 unit
- USB Data Cable (Specifications: Φ4mm*2m): 1 unit
- Microphone Clip: 1 unit
- Tripod Stand: 1 unit
- Windscreen: 1 unit
- User Manual: 1 copy
Technical Parameters
- Data Transmission: USB 2.0
- Sample Rate: 44.1 / 48 KHz
- Bit Rate: 16 bit
- Frequency Response: 20 Hz - 20 KHz
- Cartridge: Φ16mm condenser capsule
- Polar Pattern: Cardioid
- Sensitivity: -14dB ± 3dB (0dB = 1V/Pa/m at 1 KHz)
- Output Sensitivity: -5dB ± 3dB
- Max SPL: ≥ 108dB (at 1KHz, 1% THD)
- Power Supply: USB (DC 5V=100mA)
- Headset Output Peak Power: ≥ 120mW (32 Ohm load)
- Headset Output Distortion: ≤ 0.1% (at 1KHz/Pa, A-Weighted)
- Headset Output Impedance: 32 Ω
- S/N Ratio: 92dB (A-Weighted)
- Unit Weight: Approx. 371g
- Dimensions: Φ54 x 128mm
Note: Data tested by Takstar laboratory. Takstar reserves the right of final interpretation.
Function Diagram
The microphone features:
- (1) Operation Indicator Light: Solid green indicates the microphone is working. Turns red when the signal is overloaded. Lights off when disconnected.
- (2) Microphone Volume Knob: Adjusts microphone input gain. Turn right to increase, left to decrease.
- (3) Headphone Volume Knob: Adjusts headphone monitoring volume. Turn right to increase, left to decrease.
- (4) Headphone Interface: Φ3.5mm stereo headphone jack for monitoring microphone and playback audio.
- (5) Mini USB Interface: Connects to computers or mobile devices.
Note: An Apple Camera Connection Kit is required for iPhone/iPad connection. Using genuine Apple accessories is strongly recommended to avoid compatibility issues.
Installation Instructions
- Unfold the tripod stand and place it on a flat surface. Screw the microphone clip onto the top of the stand clockwise.
- Mount the microphone into the clip, ensuring the side marked "PC-K220USB" faces the sound source. Adjust the angle and tighten the clip nut. For stability, it's recommended to position the microphone front-side up with the bottom nut facing down.
- Connect the USB data cable to the microphone's Mini USB port and the other end to your computer or mobile device. For iPhone/iPad, use an Apple Camera Connection Kit. For Android phones, a Type-C adapter may be needed (adapters sold separately). Connect headphones to the Φ3.5mm headphone jack on the rear of the microphone.
Uninstallation Instructions
- Disconnect the USB data cable from the microphone.
- Loosen the microphone clip nut counter-clockwise and remove the microphone.
- Hold the tripod stand and unscrew the microphone clip counter-clockwise from the stand.
Operation Instructions
When using the PC-K220USB with a computer, ensure "TAKSTAR PC-K220USB" is selected as the audio device. The following describes setup for Windows 7 and macOS. Other system versions follow similar procedures.
After connecting the device and setting the audio, launch your video, streaming, or karaoke software and adjust the microphone and headphone volumes to a suitable level.
A. Windows 7 Setup
- Connect the USB data cable to the microphone and computer. Wait for the operation indicator light to turn on. If not, try another USB port or consult the troubleshooting section.
- Windows will automatically recognize the USB device and install drivers. Select "TAKSTAR PC-K220USB" as the audio device in the Sound settings (Control Panel > Hardware and Sound > Sound > Manage audio devices). Set it as the default playback and recording device.
- In the device properties, set the "Levels" volume to 100%. Save and exit.
B. macOS Setup
- Connect the USB data cable to the microphone and computer. Wait for the operation indicator light to turn on. If not, try another USB port or consult the troubleshooting section.
- macOS will automatically recognize the USB device and install drivers. Select "TAKSTAR PC-K220USB" as the audio device via System Preferences > Sound.
- Under the "Input" tab, select "TAKSTAR PC-K220USB" as the default audio input device.
- Under the "Output" tab, select "TAKSTAR PC-K220USB" as the default audio output device.
- Save the settings and exit.
C. iOS Setup
- Connect the USB data cable to the microphone and an Apple Camera Connection Kit (sold separately). Connect the Camera Connection Kit to the iPhone/iPad's Lightning port. Wait for the operation indicator light to turn on. If not, try another connection or consult troubleshooting.
- iPhone/iPad will automatically recognize the USB device and set "TAKSTAR PC-K220USB" as the default device.
D. iOS Compatible Mode
The PC-K220USB can connect to iPad/iPhone via USB for recording, streaming, and music appreciation. Low iOS versions may cause incompatibility; updating to the latest system version is recommended. If the connection is unstable due to a phone case, remove the case. If an incompatibility message appears ("Unsupported USB device"), ensure the iOS version is up-to-date. The microphone may also be compatible with some Android phones, but compatibility varies by device and system version.
Precautions
- Maintain a distance of 20-30 cm between your mouth and the microphone. Too close can cause distortion, too far reduces sensitivity and signal-to-noise ratio.
- Do not cover the microphone grille with your hand, as it affects sound pickup.
- Mount the microphone on a stand rather than holding it to avoid handling noise and sweat corrosion.
- Use the provided windscreen or a pop filter to prevent plosive sounds ("p" and "b") and moisture from affecting the capsule.
- Avoid using the microphone with speakers placed close by to prevent audio feedback (howling). If using speakers, maintain a significant distance and avoid pointing the microphone directly at them.
Troubleshooting
- LED does not light up: Ensure the USB cable is securely connected. Try reconnecting or using a different USB port.
- No sound during playback: Check cable connections for both the microphone and headphones. Ensure headphone volume on the microphone and volume in the app/computer are not set too low.
- Microphone has no sound: Verify the USB connection. Check if microphone and headphone volumes are set too low and adjust accordingly.
- No sound recorded or recorded sound is too low: Ensure the USB connection is secure. Check microphone volume settings within the recording software and the computer's recording device volume.
- Dual sound during mobile live streaming: Some live streaming apps lack a monitoring mute function, causing echo. If this occurs, set the mobile device's volume to minimum.
Safety Instructions
- Adjust volume to a comfortable level and avoid prolonged use at high volumes to prevent hearing damage.
- If you notice smoke, unusual odors, or other abnormalities, immediately turn off the power, unplug the device, and contact a dealer for service.
- Keep the product and accessories in a dry, ventilated area, away from moisture, dust, fire sources, rain, water, and excessive impact or vibration. Do not cover ventilation holes.
- Clean the device with a soft, dry cloth. Do not use solvents or chemical cleaners.
- Comply with all safety regulations and laws during use. Do not use in prohibited areas.
- Do not attempt to disassemble or repair the product yourself. Contact a local dealer for service. Unauthorized modifications will void the warranty.
- Only use accessories specified by the manufacturer.
Icon Meaning
The product complies with European directives regarding electromagnetic compatibility (RL2004/108/EG) and low voltage (RL2006/95/EG).
The WEEE symbol indicates that this product should not be disposed of with household waste. It must be recycled at an authorized WEEE recycling facility to prevent environmental and health impacts.
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
About This User Manual
The information in this manual is accurate as of the printing date. Takstar continuously improves its products, so specifications may vary. For the latest version of the manual, please visit the Takstar website: https://www.takstar.com/. Product specifications and accessories may differ by region. Contact your local Takstar dealer for confirmation.
Environmental Information
RoHS Compliance Table:
| Component | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Plastic Parts | ○ | ○ | ○ | ○ | ○ | ○ |
| Metal Parts | × | ○ | ○ | ○ | ○ | ○ |
| Circuit Board Assembly | × | ○ | ○ | ○ | ○ | ○ |
| Cable | × | ○ | ○ | ○ | ○ | ○ |
○: Content is below the regulated limit. ×: Content exceeds the regulated limit.
The symbol indicates the product's eco-friendly use period.
Product Service Guarantee (China Market Only)
- This document serves as a warranty certificate. Please keep it safe; lost certificates will not be honored.
- Warranty Period: Twelve months from the date of purchase.
- Takstar will provide free repair for damages not caused by force majeure.
- Damages due to improper handling or use may incur repair charges at the service center's discretion.
- Unauthorized disassembly or repair will void the warranty.
- These warranty terms apply only to the China market (excluding Hong Kong, Macau, and Taiwan).
Customer Information:
Name: ____________________ Phone: ____________________ Address: ____________________
Product: ____________________ Model: PC-K220USB Purchase Date: ______ Year ______ Month ______ Day
Repair Record:
| Record | Technician Signature | Date |
|---|---|---|
Manufacturer Information
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo, Huizhou, Guangdong 516121 China
Tel: 400-6828-333
Website: https://www.takstar.com/
Designed & Manufactured by Guangdong Takstar Electronic Co., Ltd.
China General Agent for Takstar Ke Sheng Series:
HUIZHOU INGPING ELECTROSONIC CO., LTD
Address: Room 1111, Shengfeng Business Building, No. 26 Jiangbei Residential Area, Huicheng District, Huizhou City
Tel: +86 752 2072638 Fax: +86 752 7213017
Email: ingping@ingping.com Website: www.ingping.com
