V-TAC VT-7972 Gallery Pendant Installation Instructions

Technical Data

WEEE Number: 80133970

Warranty: 2 Year Warranty

Introduction & Warranty

Thank you for selecting and buying a V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any further queries, please contact your dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.

The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

Warnings

1. Please turn off power and read this instruction before starting the installation.
2. Please turn off power before changing the bulb and cleaning the fixture.
3. Proper grounding should be ensured throughout the installation.
4. Installation should only be done by a certified electrician.
5. For Indoor Use only.

⚡ Caution: Risk of electric shock.

This marking indicates that this product should not be disposed of with other household wastes. [WEEE symbol]

Installation Diagram and Steps

The installation process involves several steps to securely mount the pendant light and connect it to the power supply.

Diagram Description:

The diagram illustrates the mounting of a pendant light fixture. It shows a ceiling junction box, a mounting bar attached to it, the pendant's canopy covering the wiring, the light fixture itself with a rope suspension, and the bulb socket. Key components are numbered 1 through 6.

Installation Steps:

1. Step 1: Use screws to fix the mounting bar to the junction box.
2. Step 2: Make the wire connections using connectors.
   • Connect the live wire (L) from the fitting to the live wire from the main power supply.
   • Connect the neutral wire (N) from the fitting to the neutral wire from the main power supply.
   • Connect the earth wire from the fitting to the earth wire from the main power supply.
   • Please pay close attention and ensure that wires are not exposed outside during wiring connections.
3. Step 3: Use screws to fix the canopy to the mounting bar.
4. Step 4: Use the socket ring to fix the shade to the socket.
5. Step 5: Install the bulb (not included) into the socket, ensuring it does not exceed the recommended wattage.
6. Step 6: Check if the installation is completed and then turn on the power.