V-TAC GALLERY - PENDANT (VT-7977) Installation Instruction
Meaningful Innovation.
WEEE Number: 80133970
Technical Data
| SKU | 23367 |
| MODEL | VT-7977 |
| MAX RATED WATTS | 40W |
| BASE | E27 (Bulb not included) |
| MATERIAL | Wood |
| WIRE LENGTH | 1 METER |
| IP RATING | IP20 |
| INPUT VOLTAGE | AC: 220-240V, 50Hz |
Introduction & Warranty
Thank you for selecting and buying a V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. For any queries, please contact your local dealer or vendor. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. V-TAC provides no warranty against damage to any surface due to incorrect removal and installation of the product. The product is suitable for 10-12 hours of daily operation. Usage of the product for 24 hours a day would void the warranty. This product is warranted for manufacturing defects only.
Warnings
- Please turn off power and read these instructions before starting the installation.
- Please turn power off before changing the bulb and cleaning the fixture.
- Proper grounding should be ensured throughout the installation.
- Installation should only be done by a certified electrician.
- For Indoor Use only.
♻️ This marking indicates that this product should not be disposed of with other household wastes.
⚡ Caution, risk of electric shock.
Installation Diagram & Steps
Installation Diagram Description
The diagram illustrates the components and assembly process for the V-TAC GALLERY - PENDANT (VT-7977). It shows a ceiling junction box, a mounting bracket, electrical wires (Live, Neutral, Earth), the pendant canopy, the light socket assembly, and the shade. The diagram is accompanied by numbered steps that correspond to the installation procedure.
Installation Steps
- Use screws to fix the mounting bar to the junction box.
- Make the wire connections using the provided connectors:
- Connect the live wire (L) from the fitting to the live wire from the main power supply.
- Connect the neutral wire (N) from the fitting to the neutral wire from the main power supply.
- Connect the earth wire from the fitting to the earth wire from the main power supply.
- Pay close attention and ensure the wires are not exposed outside when making wiring connections.
- Use screws to fix the canopy to the mounting bar.
- Use the socket ring to fix the shade to the socket.
- Install the bulb (not included) at the recommended wattage to the socket.
- Check if the installation is completed and then turn on the power.
