Outsunny A20-174 Dome Tent

Parts Included

• A. Bag: One carrying bag.
• B. Internal Tent: One inner tent structure.
• C. External Tent: One outer rainfly.
• D. Pole: Three tent poles.
• F. Nails: Twelve ground stakes/nails.
• G. Wind rope: Five guy lines/ropes.

Assembly Steps

Open Steps:

• Step 1: Take out the inner tent and lay it flat. Identify two poles of the same length and insert them into the corresponding pole sleeves or grommets on the inner tent.
• Step 2: Insert the ends of the poles into the copper rings located at the four corners of the tent base.
• Step 3: Hang the hook(s) from the inner tent onto the tent poles.
• Step 4: Take out the external tent (rainfly). Identify the remaining pole and thread it through its designated pole sleeve on the rainfly.
• Step 5: Drape the outer tent over the inner tent. Align and insert the end of the pole (from step 4) into the copper ring or grommet at the tent foot.
• Step 6: Secure the tent by inserting the ground nails (stakes) into the ground and attaching the wind ropes to the tent loops and stakes for stability.

Storage Steps:

• Step 1: Remove the ground nails (stakes) and detach the windproof ropes from the tent and stakes.
• Step 2: Release the buckles or clips connecting the inner and outer tents, and carefully pull the poles out from their sleeves or grommets.
• Step 3: Fold the tent neatly, organize all accessories (poles, stakes, ropes), and place them inside the carrying bag.