CUBOT A10 Quick Start Guide

Device Overview

This guide provides essential information for quickly setting up and safely using your CUBOT A10 smartphone.

Physical Features

Earpiece speaker
Front camera
Light sensor
Receiver
USB Type-C port
Volume up button
Volume down button
Power button
Rear camera
Flash
Fingerprint sensor
Speaker
Microphone

The device supports dual SIM cards (Nano SIM) and a TF (MicroSD) card. The SIM/TF card slot is located on the side of the device.

SIM/TF Card Installation

To insert SIM or TF cards, locate the card tray on the side of the phone. Use the provided SIM ejector tool to open the tray. Place the Nano SIM cards and/or TF card into the designated slots on the tray, ensuring correct orientation. Carefully reinsert the tray into the device.

Regulatory Information

For more information, please visit www.cubot.net.

Specific Absorption Rate (SAR)

The CUBOT A10 complies with RF specifications. SAR (Specific Absorption Rate) values are provided for head and body exposure.

Head SAR: 0.286 W/kg (10g)
Body SAR: 0.746 W/kg (10g)
Simultaneous transmission SAR: 1.21 W/kg (10g)

The maximum SAR value for this device when tested for use at the ear is 0.286 W/kg, and when properly worn on the body is 0.746 W/kg. The simultaneous transmission SAR value is 1.21 W/kg.

This device uses Android operating system and does not pre-install any third-party software.

CE and RoHS Compliance

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The device also complies with RoHS standards.

The device operates within the following frequency bands and maximum radio-frequency power:

GSM 850/900: 33 dBm
GSM 1800/1900: 30 dBm
WCDMA Band I/VIII: 23 dBm
LTE Band 1/3/7/8/20: 23 dBm
Bluetooth: 10 dBm
Wi-Fi 2.4G: 18 dBm

The operating temperature range for the device is 0°C to 40°C.

Important Safety Information and Warnings

Please read this information carefully before using your device to ensure safe and proper operation.

Battery Safety

Do not disassemble, impact, squeeze, or put the battery into fire.
If there is serious swelling, do not continue to use the battery.
Do not place in a high-temperature environment or expose to water.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

Device Usage and Disposal

Do not use the device in areas where wireless devices are prohibited or may cause interference (e.g., hospitals, aircraft).
Maintain a minimum distance of 15 cm between the device and a pacemaker or other medical implant to avoid potential interference.
Do not expose the device to extreme temperatures, direct sunlight, or excessive humidity.
Dispose of this product correctly. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
The device may not function correctly if used in temperatures below 0°C or above 40°C.

Android is a trademark of Google LLC.

Manufacturer Information

SHENZHEN HAFURI TECHNOLOGY CO., LTD.
Unit 401, 4th Floor, Block A, Building 1, Gaofeng Technology Building, No. 901, Tianfu Road, Gaofeng Community, Dalang Street, Longhua District, Shenzhen, P.R. China
Tel: 0755-83821787
Fax: 0755-23012098

	CUBOT A10 Quick Start Guide This quick start guide for the CUBOT A10 smartphone provides essential information on device layout, regulatory compliance, SAR values, and important safety warnings. Learn about proper usage, battery care, and disposal guidelines for your CUBOT A10.
	CUBOT KINGKONG 5 PRO Quick Start Guide Get started with your CUBOT KINGKONG 5 PRO smartphone. This guide provides essential information on setup, support, regulatory compliance, safety warnings, and device specifications.
	CUBOT KINGKONG POWER 3 Quick Start Guide Quick start guide for the CUBOT KINGKONG POWER 3, providing essential information on setup, safety, and regulatory compliance. Includes multilingual support details and device overview.
	CUBOT P90 Quick Start Guide and Safety Information This document provides a quick start guide and essential safety, regulatory, and SAR information for the CUBOT P90 smartphone. It covers device features, warnings, FCC compliance, and RF exposure guidelines.
	CUBOT NOTE 30 Quick Start Guide This guide provides essential information for the safe and proper use of the CUBOT NOTE 30 smartphone, including support contacts, regulatory information, and important safety warnings.
	CUBOT KINGKONG ACE 3 Quick Start Guide Welcome to the CUBOT KINGKONG ACE 3. This guide provides essential information for safe and proper use, including setup, support, regulatory details, and important safety warnings.
	CUBOT A40 Quick Start Guide Get started with your CUBOT A40 smartphone. This guide provides essential information on setup, safety, regulatory compliance, and support.
	CUBOT KINGKONG 6 Quick Start Guide: Setup, Safety, and Features Get started with your CUBOT KINGKONG 6 smartphone. This guide covers setup, safety warnings, regulatory information, SAR values, and key features for a safe and optimal user experience.