Hygger HG170 User Manual
hygger Cylindrical Aquarium Wave Maker
WARNINGS
- To ensure performance, do not let the pump run dry.
- Be careful when assembling the magnetic base. Move the magnetic base parallelly to the outer wall of the fish tank so that it does not break.
- Do not immerse the plug in water or other liquids.
- Do not allow children or inexperienced persons to operate or play the appliance alone without safety supervision.
- This pump is unsuitable if you wear a pacemaker or have a defibrillator implanted.
1. INTRODUCTION
The wave-making pump can cause the tank's water flow to create a large current and circulation. This is beneficial for stabilizing the water quality, increasing the dissolved oxygen in the water, and promoting fish growth.
2. PRODUCT FEATURES
- The flow direction can be set at different angles as required. (360°)
- The rotatable inlet hood can adjust the flow rate as required and can also prevent fish from getting lost.
- High-performance motor, low noise.
- Unique anti-reverse design. Wear-resistant ceramic shaft, suitable for fresh and salt water.
3. PRODUCT SPECIFICATION
| Model | Voltage | Flow rate | Product size |
|---|---|---|---|
| HG170-5W | US standard: AC110-120V/60Hz | 792GPH(3000L/H) | Φ2.4*5.35" (Φ61*136MM) |
| HG170-7W | UK/EU/AU standard: AC220-240V/50Hz | 1056GPH(4000L/H) | Φ2.7*5.8" (Φ69*148MM) |
| HG170-13W | Japan standard: AC100-110V/50-60Hz | 2110GPH(8000L/H) | Φ3.2*6.2" (Φ82*157MM) |
| Model | Suitable tank length | Suitable tank | Suitable for fish tank wall thickness | Cord length |
|---|---|---|---|---|
| HG170-5W | 20-32" (50-80CM) | 20-60Gal (75-220L) | ≤8MM | 5.9FT (1.8M) |
| HG170-7W | 32-47" (80-120CM) | 50-100Gal (180-370L) | ≤12MM | 5.9FT (1.8M) |
| HG170-13W | 40-60" (100-150CM) | 80-150Gal (300-560L) | ≤12MM | 5.9FT (1.8M) |
Installation Diagram
Components: Ceramic shaft, Impeller, Rotatable front cover of the water inlet, Outer cover, Universal joint, Magnetic base.
Step 1: Connect the pump head section to the base. Remove the rear magnetic base from the bottom of the pump. Place the pump in the center of the inner tank wall and hold it firmly with one hand. Shift the rear magnetic base along the outer wall to the same position and secure the pump with the other hand. (See Figure 1)
Figure 1: Diagram showing the wave maker pump attached to the inside of an aquarium tank, with the magnetic base on the outside. An arrow indicates the direction of water flow.
Caution: Be careful not to pinch your fingers; the magnet is very strong.
Step 2: Connect the power supply. The pump is ready for operation.
4. MAINTENANCE
- Clean the pump regularly to ensure optimal performance.
- Press the two clasps on the outer cover to separate the front part of the cover from the rear part.
- Clean the impeller and ceramic shaft with a soft cloth or a small brush with clean water to keep them clean.
Diagram showing the outer cover being separated into front and rear parts by pressing clasps. Another diagram shows the impeller and ceramic shaft being cleaned.
5. DISPOSAL
Please do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Do not put it together with domestic waste, which should be handled by an authorized place for recycling of electrical and electronic appliances. Please consult with your local seller to ensure the product is disposed of in an environmentally friendly way.
Diagram showing a waste bin with a cross over it, indicating not to dispose of the product in regular waste.
6. PACKING LIST
- 1x Wave pump
- 1x User manual
7. CONTACT INFORMATION
E-mail: service@hygger-online.com
Website: www.hygger-online.com
File Info : application/pdf, 5 Pages, 848.70KB
DocumentDocumentReferences
Adobe PDF library 15.00 Adobe Illustrator 24.2 (Windows)
Online.com | Markmonitor
hygger - The Think Tank For Your TankRelated Documents
 |
Hygger HG042 Aquarium Wave Maker Pump User Manual Comprehensive user manual for the Hygger HG042 aquarium inverter wave maker pump, detailing features, installation, operation modes, wireless linking, troubleshooting, maintenance, specifications, and safety warnings. |
 |
Hygger HG151 DC PRO Aquarium Wave Maker User Manual User manual for the Hygger HG151 DC PRO Aquarium Wave Maker, detailing product features, specifications, controller functions, maintenance, troubleshooting, and disposal. |
 |
Hygger HG112 User Manual: Aquarium DC Wave Maker Pump Detailed user manual for the Hygger HG112 DC wave maker pump, covering features, installation, programming, troubleshooting, and specifications for aquariums from 55 to 150 gallons. |
 |
Hygger HG172 User Manual: Lite Aquarium Wave Maker DC Pump Comprehensive user manual for the Hygger HG172 Lite Aquarium Wave Maker DC Pump, detailing features, specifications, installation, operation, warnings, troubleshooting, and maintenance for optimal aquarium wave generation. |
 |
Hygger HG112 Aquarium DC Wave Maker Pump User Manual Comprehensive user manual for the Hygger HG112 aquarium DC wave maker pump, detailing features, installation, operation, programming, troubleshooting, and maintenance for 55-150 gallon aquariums. |
 |
Hygger HG165 Aquarium Wave Maker User Manual Comprehensive user manual for the Hygger HG165 Flow One Aquarium Wave Maker, detailing product features, installation, operation, troubleshooting, and maintenance. |
 |
Hygger HG177 Aqua-Guardian Internal Filter User Manual User manual for the Hygger HG177 Aqua-Guardian Internal Filter, detailing features, specifications, installation, troubleshooting, safety precautions, warranty, disposal, and contact information. |
 |
Hygger HG-010 Wave Maker User Manual This user manual provides comprehensive instructions, features, parameters, installation guides, maintenance procedures, troubleshooting tips, and safety warnings for the Hygger HG-010 Wave Maker, designed to simulate natural water currents in aquariums. |