Aldes Virtuo-Fix TE Galva+joint - Ø 315/125 mm

Product Highlights

• Ease and speed of installation
• Class C airtightness
• Aesthetic network design

Product Description

The TE 90° with joints allows the connection of two galvanized ducts at a 90° angle, ensuring Class C airtightness. It guarantees a leak-free and low-pressure-drop installation on the branch connection.

Application Fields

• Residential collective housing, New construction, Renovation, Tertiary premises

Installation

• The connection/disconnection is made by a slight rotation of the fitting into the duct.
• Airtightness is ensured by the ALDES joint, eliminating the need for mastic or adhesive tape.
• For vertical installations, the use of self-drilling screws is recommended.
• Installation time savings compared to standard fittings are approximately 20% (minimum 15-30 seconds per junction for diameters 125 to 315, resulting in 30-60 seconds saved per fitting for these diameters).
• ALDES joint fittings are specifically designed for easy connection/disconnection. While ensuring Class C airtightness, the ALDES range is characterized by low connection torque.

Reference Argument

Application:

Leak-tight connection of two duct branches at a 90° angle in tertiary and collective networks.

Description:

Galvanized steel T-junction with joint, diameter 315/125 mm.

Main Characteristics:

• Available in diameters from 125 to 560 mm.
• Galvanized steel compliant with EN 10346 standard, ensuring coating regularity.
• Crimped joint up to 315 mm diameter included.
• Bi-density joint in groove for diameters above 315 mm.
• Operating temperatures: -30°C to +100°C.
• Resistance to aging (over 30 years), UV, and ozone.
• Fire classification: M0.
• Airtightness class: C according to NF EN 12237 standard.

General Data

References:

11098019

Main Material:

Galvanized steel

Dimensional Data

Diagram of Space Requirements: Equerre T-junction

Regulatory Data

References:

11098019

Fire Classification:

M0