Aldes Virtuo-Fix 45° Galvanized Elbow with Joint - Ø 200 mm

Product Information

Reference: 11098124

Product Name: C 45° GALVA+joint - Ø 200 mm embouti

This 45° elbow with joint allows for a 45° change in direction in a galvanized duct system, ensuring Class C airtightness. Elbows up to diameter 200 mm are crimped, while diameters from 250 mm to 560 mm use segmented elbows.

Product Highlights

• Ease and speed of installation
• Class C airtightness
• Aesthetic ductwork

Product Description

The 45° elbow with joint facilitates a 45° change in direction for a galvanized duct system, providing Class C airtightness. For diameters up to 200 mm, the elbows are crimped, while for diameters from 250 mm to 560 mm, they are segmented.

Application Fields

• Residential collective housing
• New construction
• Renovation
• Commercial premises

Installation

• The push-fit/pull-off connection is made by a slight rotation of the accessory into the duct.
• Airtightness is ensured by the ALDES joint, eliminating the need for mastic or adhesive tape.
• Self-tapping screws are recommended, especially for vertical installations.
• Installation time savings compared to standard accessories are approximately 20% (a minimum saving of 15 to 30 seconds per joint for diameters 125 to 315 mm, resulting in a saving of 30 to 60 seconds per accessory for these diameters).
• ALDES jointed accessories are specifically designed for easy push-fit/pull-off connections. While ensuring Class C airtightness, the ALDES range is characterized by low connection torque.

Reference Argument

Application:

Leak-tight 45° change of direction for tertiary or collective HVAC ductwork.

Description:

Crimped 45° elbow with joint, galvanized steel, 200 mm diameter.

Main Characteristics

• Available in diameters from 125 mm to 560 mm.
• Galvanized steel compliant with EN 10346 standard, ensuring coating uniformity.
• Operating temperatures: -30°C to +100°C.
• Resistance to aging (over 30 years), UV, and ozone.
• Fire classification: MO.
• Airtightness Class C according to NF EN 12237 standard.

General Data

Dimensional Data

Diagram: A schematic showing the dimensions of the 45° elbow with joint.

Regulatory Data