Aldes Virtuo-Fix TE Galva+Joint - Ø 355/200 mm

Product Highlights

• Ease and speed of installation
• Class C airtightness
• Aesthetic network design

Product Description

The TE 90° fitting with joint connects two galvanized ducts at a 90° angle, ensuring Class C airtightness. It guarantees a leak-free and low-pressure drop installation on the branch connection.

Application Fields

• Residential collective housing
• New construction
• Renovation
• Commercial premises

Installation

• The push-fit/pull-off connection is made by a slight rotation of the fitting into the duct.
• Airtightness is ensured by the ALDES joint, eliminating the need for mastic or adhesive tape.
• Self-drilling screws are recommended, especially for vertical installations.
• Installation time savings compared to standard fittings are approximately 20% (minimum 15-30 seconds per connection for diameters 125-315, resulting in 30-60 seconds saved per fitting for these diameters).
• ALDES joint fittings are designed for easy push-fit/pull-off connections. While ensuring Class C airtightness, the ALDES range features low connection torque.

Reference Details

Application:

Leak-tight connection of two duct branches at a 90° angle in tertiary and collective networks.

Description:

T-joint in galvanized steel, diameter 355/200 mm.

Main Characteristics:

• Available in diameters from 125 mm to 560 mm.
• Galvanized steel compliant with EN 10346 standard, ensuring coating regularity.
• Crimped joint up to diameter 315 mm.
• Bi-density joint in groove for diameters above 315 mm.
• Operating temperatures: -30°C to +100°C.
• Resistance to aging (over 30 years), UV, and ozone.
• Fire classification: MO.
• Airtightness class C according to NF EN 12237 standard.

General Data

Dimensional Data

Diagram: Schematic of the T-fitting footprint.

Regulatory Data