Durastar HVAC Product Specifications
Durastar Wall Mounted Indoor Units (IDU)
This section details specifications for various Durastar Wall Mounted Indoor Units (IDUs).
DRAW09F1B - 9,000 BTU/H
| Project Name | |
|---|---|
| Location | |
| Architect | |
| Engineer | |
| Contractor | |
| Reference | |
| Submitted By | |
| Date |
Indoor Unit (IDU)
Model: DRAW09F1B
Product Features:
- Wireless Remote Control with "Follow Me" Technology
- Single or Multizone compatible
- High efficiency SEER rating, up to 24
- Sleep Mode
- Turbo Mode
- 24-Hour Timer Feature
- Anti-corrosive fin coating
Specifications
| Cooling Capacity (BTU/hr) | 9000 |
|---|---|
| Heating Capacity (BTU/hr) | 10000 |
| Voltage/Phase/Frequency | 208-230V, 1 Phase, 60 Hz |
| Voltage Range | 187-253V |
| Indoor Unit Air Flow (CFM) | Low: 153, Medium: 194, High: 291 |
| Moisture Removal (Pints/day) | 37.20 |
| Drain Port O.D. | Ø5/8" (Ø16mm) |
| Recommended Breaker (Amps) | 15 |
| Sound Pressure (dB(A)) | Low: 23.5, Medium: 35, High: 40 |
| Refrigerant | R410A |
Line Set Requirements
| Connection Type | Flare |
|---|---|
| Liquid | Ø1/4" (Ø6.35mm) |
| Gas | Ø3/8" (Ø9.52mm) |
Dimensions and Weight
| Unit Dimensions | Width: 31 9/16", Depth: 7 7/8", Height: 11 5/8" |
|---|---|
| Carton Dimensions | Width: 34 7/16", Depth: 11 1/4", Height: 14 15/16" |
| Net Weight | 19 lbs. |
| Gross Weight | 24.3 lbs. |
Diagrams (Textual Description)
Unit Dimensions Diagram: Shows the width, depth, and height of the indoor unit. Front view displays width and height, side view displays depth and height.
Mounting Plate Dimensions Diagram: Illustrates the dimensions of the mounting plate, including hole placements for wall mounting. Shows width, height, and various hole dimensions and distances.
Clearance Distances Diagram: Indicates required clearances around the unit for proper operation. Specifies minimum distances for top, sides, and rear.
DRAW12F1B - 12,000 BTU/H
| Project Name | |
|---|---|
| Location | |
| Architect | |
| Engineer | |
| Contractor | |
| Reference | |
| Submitted By | |
| Date |
Indoor Unit (IDU)
Model: DRAW12F1B
Product Features:
- Wireless Remote Control with "Follow Me" Technology
- Single or Multizone compatible
- High efficiency SEER rating, up to 22.2
- Sleep Mode
- Turbo Mode
- 24-Hour Timer Feature
- Anti-corrosive fin coating
Specifications
| Cooling Capacity (BTU/hr) | 12000 |
|---|---|
| Heating Capacity (BTU/hr) | 12000 |
| Voltage/Phase/Frequency | 208-230V, 1 Phase, 60 Hz |
| Voltage Range | 187-253V |
| Indoor Unit Air Flow (CFM) | Low: 153, Medium: 194, High: 291 |
| Moisture Removal (Pints/day) | 78.24 |
| Drain Port O.D. | Ø5/8" (Ø16mm) |
| Recommended Breaker (Amps) | 15 |
| Sound Pressure (dB(A)) | Low: 25, Medium: 36, High: 42 |
| Refrigerant | R410A |
Line Set Requirements
| Connection Type | Flare |
|---|---|
| Liquid | Ø1/4" (Ø6.35mm) |
| Gas | Ø1/2" (Ø12.7mm) |
Dimensions and Weight
| Unit Dimensions | Width: 31 9/16", Depth: 7 7/8", Height: 11 5/8" |
|---|---|
| Carton Dimensions | Width: 34 7/16", Depth: 11 1/4", Height: 14 15/16" |
| Net Weight | 18.7 lbs. |
| Gross Weight | 24.3 lbs. |
Diagrams (Textual Description)
Unit Dimensions Diagram: Shows the width, depth, and height of the indoor unit. Front view displays width and height, side view displays depth and height.
Mounting Plate Dimensions Diagram: Illustrates the dimensions of the mounting plate, including hole placements for wall mounting. Shows width, height, and various hole dimensions and distances.
Clearance Distances Diagram: Indicates required clearances around the unit for proper operation. Specifies minimum distances for top, sides, and rear.
DRAW18F1B - 18,000 BTU/H
| Project Name | |
|---|---|
| Location | |
| Architect | |
| Engineer | |
| Contractor | |
| Reference | |
| Submitted By | |
| Date |
Indoor Unit (IDU)
Model: DRAW18F1B
Product Features:
- Wireless Remote Control with "Follow Me" Technology
- Single or Multizone compatible
- High efficiency SEER rating, up to 24
- Sleep Mode
- Turbo Mode
- 24-Hour Timer Feature
- Anti-corrosive fin coating
Specifications
| Cooling Capacity (BTU/hr) | 18000 |
|---|---|
| Heating Capacity (BTU/hr) | 18000 |
| Voltage/Phase/Frequency | 208-230V, 1 Phase, 60 Hz |
| Voltage Range | 187-253V |
| Indoor Unit Air Flow (CFM) | Low: 382, Medium: 459, High: 531 |
| Moisture Removal (Pints/day) | 87.36 |
| Drain Port O.D. | Ø5/8" (Ø16mm) |
| Recommended Breaker (Amps) | 15 |
| Sound Pressure (dB(A)) | Low: 25, Medium: 41, High: 46 |
| Refrigerant | R410A |
Line Set Requirements
| Connection Type | Flare |
|---|---|
| Liquid | Ø1/4" (Ø6.35mm) |
| Gas | Ø1/2" (Ø12.7mm) |
Dimensions and Weight
| Unit Dimensions | Width: 42 5/8", Depth: 9 5/8", Height: 13 1/4" |
|---|---|
| Carton Dimensions | Width: 45 1/2", Depth: 12 3/8", Height: 16 5/16" |
| Net Weight | 29.5 lbs. |
| Gross Weight | 37.5 lbs. |
Diagrams (Textual Description)
Unit Dimensions Diagram: Shows the width, depth, and height of the indoor unit. Front view displays width and height, side view displays depth and height.
Mounting Plate Dimensions Diagram: Illustrates the dimensions of the mounting plate, including hole placements for wall mounting. Shows width, height, and various hole dimensions and distances.
Clearance Distances Diagram: Indicates required clearances around the unit for proper operation. Specifies minimum distances for top, sides, and rear.
DRAW24F1B - 24,000 BTU/H
| Project Name | |
|---|---|
| Location | |
| Architect | |
| Engineer | |
| Contractor | |
| Reference | |
| Submitted By | |
| Date |
Indoor Unit (IDU)
Model: DRAW24F1B
Product Features:
- Wireless Remote Control with "Follow Me" Technology
- Single or Multizone compatible
- High efficiency SEER rating, up to 22.2
- Sleep Mode
- Turbo Mode
- 24-Hour Timer Feature
- Anti-corrosive fin coating
Specifications
| Cooling Capacity (BTU/hr) | 24000 |
|---|---|
| Heating Capacity (BTU/hr) | 26000 |
| Voltage/Phase/Frequency | 208-230V, 1 Phase, 60 Hz |
| Voltage Range | 187-253V |
| Indoor Unit Air Flow (CFM) | Low: 382, Medium: 459, High: 601 |
| Moisture Removal (Pints/day) | 131.52 |
| Drain Port O.D. | Ø5/8" (Ø16mm) |
| Recommended Breaker (Amps) | 15 |
| Sound Pressure (dB(A)) | Low: 28, Medium: 40, High: 48 |
| Refrigerant | R410A |
Line Set Requirements
| Connection Type | Flare |
|---|---|
| Liquid | Ø3/8" (Ø9.52mm) |
| Gas | Ø5/8" (Ø16mm) |
Dimensions and Weight
| Unit Dimensions | Width: 42 5/8", Depth: 9 3/16", Height: 13 1/4" |
|---|---|
| Carton Dimensions | Width: 45 1/2", Depth: 12 3/8", Height: 16 5/16" |
| Net Weight | 30 lbs. |
| Gross Weight | 39.1 lbs. |
Diagrams (Textual Description)
Unit Dimensions Diagram: Shows the width, depth, and height of the indoor unit. Front view displays width and height, side view displays depth and height.
Mounting Plate Dimensions Diagram: Illustrates the dimensions of the mounting plate, including hole placements for wall mounting. Shows width, height, and various hole dimensions and distances.
Clearance Distances Diagram: Indicates required clearances around the unit for proper operation. Specifies minimum distances for top, sides, and rear.
Durastar Sirius Heat Multi-Zone Heat Pump
DRA5H55M1A - 55,000 BTU/H
| Project Name | |
|---|---|
| Location | |
| Architect | |
| Engineer | |
| Contractor | |
| Reference | |
| Submitted By | |
| Date |
Outdoor Unit (ODU)
Model: DRA5H55M1A
Product Features:
- High heating capacity at 0°F
- Variable speed inverter compressor
- Low ambient heating down to -22°F
- Low ambient cooling down to 5°F
- Quiet operation
- Included base pan heater
- Auto restart
- Anti-corrosive coil coating
- Port adaptors included
System Data
| Refrigerant Type | R-410A |
|---|---|
| Refrigerant Charge (oz.) | 162.26 |
| Design Pressure (PSIG) | 550/340 |
| Outdoor Coil Coating | Golden Fin Coating |
Capacities
| DUCTLESS | MIXED | DUCTED | |
|---|---|---|---|
| Cooling (BTU/hr) Rated¹ | 55000 | 55000 | 55000 |
| Cooling (BTU/hr) at 5°F³ | 43410 | 40660 | 37910 |
| Cooling (BTU/hr) Minimum | 11600 | 15500 | 19400 |
| Cooling (BTU/hr) Maximum | 56900 | 57000 | 57100 |
| Heating (BTU/hr) Rated² | 55000 | 55000 | 55000 |
| Heating (BTU/hr) at 5°F⁴ | 45500 | 45750 | 46000 |
| Heating (BTU/hr) Minimum | 33000 | 48500 | 15500 |
| Heating (BTU/hr) Maximum | 63000 | 62300 | 61600 |
| Nominal ODU Capacity⁵ | 55000 |
Efficiency Data
| DUCTLESS | MIXED | DUCTED | |
|---|---|---|---|
| SEER2 | 20.00 | 19.40 | 18.80 |
| EER2 | 10.50 | 10.50 | 10.50 |
| HSPF2 | 9.50 | 9.40 | 9.30 |
| SEER | 19.00 | 19.00 | 19.00 |
| EER | 10.50 | 10.50 | 10.50 |
| HSPF | 10.80 | 10.90 | 11.00 |
| COP at 47°F | 3.20 | 3.20 | 3.20 |
| COP at 5°F | 1.80 | 1.85 | 1.90 |
Line Set Requirements
| Connection Type | Flare |
|---|---|
| Liquid | 5 x 1/4" (Ø6.35mm) |
| Gas | 3 x 3/8" (Ø9.52mm) 2 x 1/2" (Ø12.7mm) |
| Refrigeration Adaptors Included | 3 x 3/8"--1/2" 2 x 1/2"--3/8" 2 x 1/4"--3/8" 2 x 1/2"--5/8" |
| Minimum Indoor Units Connected | 2 |
| Pre-Charge Length | 123' |
| Maximum Length (combined IDUs) | 263' |
| Maximum Length (per IDU) | 115' |
| Minimum Length (per IDU) | 10' |
| Max. Height Differential between IDU and ODU | 49' |
| Max. Height Differential between IDUS | 33' |
| Additional Refrigerant for Ø1/4" Liquid Pipe (oz./ft) | 0.161 |
| Additional Refrigerant for Ø3/8" Liquid Pipe (oz/ft) | 0.322 |
Electrical Data
| DUCTLESS | DUCTED | |
|---|---|---|
| Voltage/Phase/Frequency | 208-230V, 1 Phase, 60 Hz | |
| Voltage Range | 187-253V | |
| Recommended Breaker (Amps) | 60 | |
| Minimum Circuit Ampacity (Amps) | 40 | |
| Communication Wire Size | 14*4 AWG Stranded | |
| Rated Current - Cooling (Amps)¹ | 23.5 | 23.5 |
| Rated Current – Heating (Amps)² | 22.5 | 22.5 |
Outdoor Unit Data
| Unit Dimensions | Width: 37-1/2", Depth: 16-5/16", Height: 52-1/2" |
|---|---|
| Carton Dimensions | Width: 43-1/8", Depth: 19-1/2", Height: 58-1/4" |
| Net Weight | 233 lbs. |
| Gross Weight | 266 lbs. |
| Cooling Operating Temperature | 5°F - 122°F |
| Heating Operating Temperature | -22°F - 75°F |
| Airflow (CFM) | 4500 |
| Sound Pressure (dB(A)) | Low: 61, Medium: 750, Medium: 800, High: 850, High: 900 |
| Fan Speed (r/min) | Low: 750, Medium: 800, Medium: 850, High: 900 |
| Fan Motor Current Type | DC |
Compressor
| Type | DC Inverter Twin Cylinder Rotary |
|---|---|
| Oil Type | VG74 |
| Oil Charge (oz.) | 49 (1460mL) |
Diagrams (Textual Description)
Clearances Diagram: Shows required clearances around the outdoor unit. Specifies distances for left, right, front, and above the unit.
Dimensions Diagram: Illustrates the overall dimensions of the outdoor unit, including width, depth, and height. Also shows carton dimensions.
Note: Illustrations are for explanatory purposes; actual shape may vary slightly.
Related Documents
 |
Durastar Split-Style Air Conditioner Installation Manuals Comprehensive installation guides from Durastar for split-style air conditioning systems, covering indoor units (DRAW series) and multi-zone outdoor units (DRA series). Includes detailed steps, safety precautions, troubleshooting, and wiring diagrams. |
 |
Durastar Wall Mounted Mini-Split Air Conditioner Owner's Manual Comprehensive owner's manual for Durastar wall-mounted split-style air conditioners, covering operation, safety, maintenance, troubleshooting, and warranty for models DRAW06F1B, DRAW09F1B, DRAW12F1B, DRAW18F1B, DRAW24F1B, DRAW33F1B. |
 |
Durastar Wall Mounted Indoor Unit Installation Manual Comprehensive installation manual for Durastar split-style air conditioners, covering model numbers DRAW06F1B, DRAW09F1B, DRAW12F1B, DRAW18F1B, and DRAW24F1B. Includes safety precautions, parts identification, step-by-step installation procedures, troubleshooting, and wiring diagrams. |
 |
Durastar Wall Mounted Indoor Unit Split-Style Air Conditioner Owner's Manual Comprehensive owner's manual for Durastar wall-mounted split-style air conditioners (models DRAW06F1B, DRAW09F1B, DRAW12F1B, DRAW18F1B, DRAW24F1B), covering installation, operation, maintenance, troubleshooting, and warranty information. |
 |
Durastar Split-Style Air Conditioner Installation Manual Comprehensive installation manual for Durastar Wall Mounted Indoor Unit Split-Style Air Conditioners, covering safety, setup, operation, and troubleshooting for models DRAW06F1B, DRAW09F1B, DRAW12F1B, DRAW18F1B, and DRAW24F1B. |
 |
Durastar DRA1U24S1A 24,000 BTU/H Single Zone Outdoor Unit Specifications Detailed specifications and submittal information for the Durastar DRA1U24S1A, a 24,000 BTU/H single zone outdoor unit, including capacities, electrical data, dimensions, operating conditions, and system requirements. |
 |
Durastar 14 SEER Series Heat Pump Installation Manual Comprehensive installation guide for Durastar 14 SEER Series Heat Pumps (1.5-5 Tons) featuring R-410A refrigerant. Covers safety, system sizing, installation procedures, troubleshooting, and maintenance for qualified HVAC professionals. |
 |
Durastar Multi-Zone Heat Pump Outdoor Unit Installation Manual Comprehensive installation manual for Durastar Multi-Zone Heat Pump Outdoor Units, covering safety precautions, installation steps, troubleshooting, and specifications for models like DRA3U18M2A, DRA3H18M2A, and others. |