Content
- 1. About camera
- 2. Connect camera
- 3. View via mobile phone
- 4. View via PC
- 5. Set up FTP and Email and Motion detection
- 6. More info
1. About camera
1.1 Product should contain:
- IP Camera * 1
- Power adapter * 1
- User manual * 1
- Network cable * 1
- Screws bag * 1
1.2 Product interface.
The camera interface shows a 'Reset Button', a 'Power' connection, and an 'RJ45 Interface'.
1.3 How to fit Waterproof lid.
An image shows the components of a waterproof lid being assembled.
2. Connect camera
2.1 Connect network cable to router and plug in power adapter.
Diagrams illustrate connecting a network cable to a router and plugging in a power adapter. A note states: 'The router must be able to connect to the Internet! Please use the standard power supply.' [Power symbol]
2.2 Connect LAN cable and power to camera, it needs about one minute to self checking and then start working.
A diagram shows the LAN cable and power connection to the camera. A note explains: 'Network indicator light (green): always flashing means network data transmission is normal.' [Network symbol]
2.3 Two-ways Connect Camera
1) Use POE Switch for power supply
Diagram illustrating connecting the POE IP Camera to a SV3C POE Switch, which connects to an NVR and Wi-Fi router, enabling PC/Laptop and Mobile Phone access. [Data+Power symbol]
2) Use Power Adapter for power supply
Diagram illustrating connecting the IP Camera to a Power Supply, then to a Router, enabling PC/Laptop and Mobile Phone access. [Power symbol]
Note:
This is a POE(Power Over Ethernet) Camera:
- There are two types of charging with the POE camera.
- 1. Single cat5 cable for both Power and Data transmission, no need power adapter. (It requires a separate PoE Injector or PoE Switch (both not included).)
- 2. There are three types of Poe power supply on the market, 48V, 24V, 12V. Our poe cameras are using the standard Poe type: 48V Poe power supply. Its security level is higher than the other two.
- The POE function of our camera can work with 48V POE switch with IEEE 802.3af.
3. View via mobile phone
3.1 Download "CamHi” from Google Play (Android Phone) / App Store (iPhone) or scan the QR code below to get APP information.
QR codes are provided for downloading the 'CamHi' app on Android and iOS devices. [Android symbol] [iOS symbol]
3.2 Run APP and Add Camera.
Screenshots guide the user through adding a camera in the 'CamHi' app. Steps include: 1. Click 'Add Camera' [Add Camera button], 2. Click LAN search to search camera UID [Search symbol], 3. Click into camera UID and click 'Done' [Done button].
3.3 After adding the camera, click online camera to view real-time image
A screenshot shows the 'CamHi' app interface with an 'Online' camera. A note indicates: 'You can only view one camera at one time'. [Monitor symbol]
Note: If you still cannot set up camera successfully, please refer to the next page on how to set up the camera's on Internet Explorer. Or contact customer service.
4. View via PC
4.1 Install "Search tool” from our website: www.sv3c.com/cd, then run it to find the cameras.
Diagrams show the 'search_setup' and 'SearchTool' icons. A screenshot of the 'Search Tool' software displays network information for found cameras. Instructions indicate: 1. Click 'Refresh' [Refresh symbol] to find the camera. 2. Double click camera information to run the browser to access the camera [Browser symbol].
A note states: 'Click "Next" [Next button] can modify network parameters of the camera if you need to change them.'
4.2 Access to the camera through IE browser on Windows PC.
A screenshot of the IP CAMERA interface shows 'Monitor' and 'Settings' tabs. The 'Monitor' view displays the camera feed. [Camera feed display]
A note states: 'In browser you can view image and configure all parameters of camera. If you are not using IE browser some settings will be missing.'
4.3 Set POE via Internet Explorer on PC
Note: If you can't connect this camera with your NVR, please try to change your IP Address Keep Fixed, please refer to the next page on how to change cameras' IP Address keep Fixed.
You can download PC software on our website: www.sv3c.com/cd
If you want to reset factory settings for your cameras, just restart or reset the camera via mobile phone or PC or Search Tool.
Network Settings:
The IP CAMERA settings interface allows configuration of 'LAN Settings'. Users can select 'Fixed IP Address' or 'Dynamic IP address'. The IP address, Subnet mask, Gateway, Primary DNS, and Secondary DNS can be configured. A note says: 'If you want to customize the IP address, you can change it here'. [IP Address input field]
Users can apply settings by clicking 'Apply' [Apply button] and 'Save settings' [Save button].
4.4 Connect and manage the multiple cameras via camera's PC software on windows PC!
A screenshot shows the PC software interface for managing multiple IP cameras, displaying their connection status and IP addresses. [Multiple camera feeds]
5. Set up FTP and Email and Motion Detection
5.1 Follow as below steps to find installation files for setup FTP and email on our website www.sv3c.com/cd.
Screenshots show the SV3C website. Steps are: 1. Enter SV3C website, find Support and Download, click Download [Download button]. 2. Find 'HX series' and click it [HX Series link]. 3. Find User Manual about how to use the FTP and email with motion detection [User Manual link].
Installation Instructions:
- 1. POE Camera(HX Series) Quick Start- Phone App User Manual
- 2. Search Tools-User Manual
- 3. IE(Internet Explorer)- User Manual
- 4. Motion Detection and Email Notification- User Manual
- 5. FTP Server- User Manual
5.2 Set motion detection alarm recording on the phone.
Screenshots of the mobile app show 'Alarm Setting'. Steps: 1. Open 'Motion Detection' [Motion Detection toggle]. 2. Set e-mail alarm or FTP [Email/FTP toggle]. Instructions also mention setting motion detection area and level. [Slider for level]
A note states: 'Motion detection alarm recording is recommended when you are without NVR'.
5.3 Set schedule recording on phone.
Screenshots of the mobile app show 'Recording Schedule'. Steps: 2. Open 'Enable Record' [Enable Record toggle]. Select 'All Days' [All Days button].
A note states: 'If you don't need the camera record to All Days, please turn off "Enable Record" or select "None". You can also set more detailed recording schedule on browser or PC software.'
5.4 Playback record on phone.
Screenshots of the mobile app show how to access recorded files. Steps: 1. Click here to enter record page [Record page link]. Click 'online' camera [Online camera button]. 3. Play or download video files [Play button] [Download button].
A note states: 'These parameters can be set in more detail via IE browser on the PC!'
5.5 Set Time Zone on phone.
Screenshots of the mobile app show 'Time Setting'. Steps: 1. Click here to set time zone for the camera [Time Zone link]. 2. Select time zone according to your phone time [Time Zone list]. 3. Click here to reboot camera and save the new time zone [Save button].
A note states: 'When your time is DST (daylight saving time), please turn on DST button!' [DST toggle]
7. More info
This manual is to help customers to know and use the camera quickly. For detailed instructions and video tutorials, please refer to our website www.sv3c.com/cd.
This manual may have descriptions and operations that do not match the product. If you have any questions or need technical support, please feel free to contact us.
