Onn. 2.1CH Soundbar with Subwoofer User Guide
Contents & Information
- Overview
- Safety Precautions
- Unpacking
- Wall Mounting Setup (Optional)
- First Time Setup
- Operation
- Cleaning & Care
- Specifications
- Troubleshooting
Features
- 2.1 Channels
- Roku TV Ready™
- Bluetooth®
- DTS:X® and DTS® Virtual:X™
- 2 Internal speakers + 1 wireless subwoofer
- 120 W RMS output / 480 W peak output (4 x RMS)
- Dolby Atmos
Connections
- 1 x HDMI® (TV eARC/ARC)
- 1 x Optical
- 1 x AUX
- 1 x USB
Overview
The soundbar features controls for ON/OFF, Volume Up, Volume Down, and Source selection. A Status LED indicates the current status.
Status LED Indicators
| Standby | Solid Red |
|---|---|
| HDMI (TV eARC/ARC) | Solid Yellow |
| Optical | Solid Purple |
| Aux in | Solid White |
| USB | Solid Green |
| Bluetooth pairing mode | Flashing Blue |
| Bluetooth device connected | Solid Blue |
| Volume up/down | Corresponding source color flash 1 time |
| Maximum/minimum volume | Corresponding source color flash 3 times |
| Mute | Flashing Red |
| Talk | Corresponding source color flash 1 time |
| Music | Corresponding source color flash 3 times |
| Movie | Corresponding source color flash 5 times |
| Bass +/- | White Status LED flash 2 times |
| Treble +/- | White Status LED flash 2 times |
| VRT:X | Yellow Status LED flash 3 times |
Wireless Subwoofer Back Panel
The back of the wireless subwoofer has a POWER input, a PAIR INDICATOR, and a PAIR BUTTON.
Soundbar Back Panel
The back of the soundbar features POWER (AC-IN), USB, OPTICAL AUDIO IN, HDMI (TV eARC/ARC), and AUX AUDIO IN (Stereo 3.5mm) ports. It also has WALL MOUNTS.
Remote Control
The remote control includes buttons for POWER ON/OFF, SOURCE, VOLUME UP, VOLUME DOWN, PLAY/PAUSE, NEXT TRACK, PREVIOUS TRACK, MUTE, BASS UP/DOWN, TREBLE UP/DOWN, MOVIE, MUSIC, TALK, and DTS® VIRTUAL:X™.
Safety Precautions
CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol indicates the presence of uninsulated “dangerous voltage” that may pose a risk of electric shock.
The exclamation point indicates the presence of important operating and maintenance instructions.
- Read all instructions before operating.
- Keep instructions for future reference.
- Heed all warnings.
- Follow all operating and use instructions.
- Do not use near water or moisture.
- Do not block ventilation openings.
- Install according to manufacturer's instructions.
- Do not install near heat sources.
- Do not defeat the purpose of polarized or grounding plugs. If a plug does not fit your outlet, consult an electrician.
- Protect the power cord from being walked on or pinched.
- Only use manufacturer-specified attachments/accessories.
- Use only with specified carts, stands, tripods, brackets, or tables. Use caution when moving carts/apparatus combinations to avoid tip-over injuries.
- Unplug during lightning storms or when unused for long periods.
- Refer all servicing to qualified personnel. Servicing is required for damage such as power cord damage, liquid spills, or dropped apparatus.
- Maintain ventilation around equipment. Do not install in confined spaces.
- This equipment is Class II or double insulated and does not require an earth connection.
- Use at a maximum ambient temperature of 35°C.
- Do not replace batteries with incorrect types.
- Do not dispose of batteries in fire or hot ovens. Do not crush or cut batteries, as this can cause an explosion.
- Avoid high temperatures, as they can cause explosions or leakage of flammable liquid/gas.
- Avoid extremely low air pressure, as it can cause explosions or leakage of flammable liquid/gas.
- Do not expose the apparatus to rain or moisture. Do not expose to dripping, splashing, or objects filled with liquids.
- The mains plug is the disconnect device and must remain readily operable.
- To reduce electric shock risk, do not remove covers. Refer servicing to qualified personnel.
- Securely attach the apparatus to the floor/wall according to installation instructions to prevent injury.
- Danger of explosion if remote control batteries are replaced incorrectly. Replace only with the same or equivalent type.
Unpacking
Parts Included
| Part | Description | Qty |
|---|---|---|
| 1 | Soundbar | 1 |
| 2 | Wireless Subwoofer | 1 |
| 3 | HDMI cable | 1 |
| 4 | Power cable | 2 |
| 5 | Wall mounting template | 1 |
| 6 | Wall mounting kit | 1 |
| 7 | Remote control (AAA batteries x2) | 1 |
Parts Diagram
A diagram shows the Soundbar (1), Wireless Subwoofer (2), HDMI cable (3), Power cable (4), Wall mounting template (5), Wall mounting kit (6), and Remote control (7) with batteries.
Wall Mounting Setup (Optional)
Tools Needed (Not Supplied)
Drill bit, Drill, Cross Head Screwdriver, Ruler, Level, Hammer.
Hardware
| Part | Description | Picture | Qty |
|---|---|---|---|
| A | Rubber pads | [rubber pad image] | 2 |
| B | Screws | [screw image] | 2 |
| C | Anchor | [anchor image] | 2 |
A diagram shows the wall mounting template with measurements (27.48" / 698 mm) and mounting hole indicators.
First Time Setup
1A. CENTER (On a Surface)
- Place the soundbar below the TV, close to ear level.
- Proceed to step 4.
A diagram illustrates the soundbar placement below a TV.
1B. PLACE (On a Wall)
- Place the wall mount template on the wall under the TV.
- Mark bracket holes, ensuring enough space between the soundbar and TV. Refer to 3B. HANG.
A diagram shows the wall mount template being used to mark holes on a wall.
Ensure screws are attached to wood studs or use anchors for drywall, concrete, or brick walls.
2B. INSTALL (On a Wall)
- Drill holes.
- Hammer in anchors (C) if required.
- Screw in screws (B) into anchors. Anchors are not needed if screwing into studs.
A diagram shows the process of drilling holes, inserting anchors, and screwing in screws for wall mounting. It also lists required hardware: Rubber pads x2 (A), Screws x2 (B), Anchors x2 (C).
Remove backing paper from rubber pads and stick them to the back of the soundbar as shown in the diagram.
3B. HANG
CAUTION: If unfamiliar with power tools or electrical wiring, consult a professional installer.
Mount hooks on screws, then slide down to lock in place.
A diagram shows the soundbar being hung on the wall mounts. A note indicates to make sure the wall mount orientation matches the example.
4. CHOOSE CABLE
Connect one cable to the Soundbar and TV.
Diagrams show OPTICAL, HDMI, and 3.5MM AUX connections, labeled as "Better", "Best", and "Good" respectively.
- To use Dolby Atmos® and DTS:X™ in HDMI (TV eARC/ARC) mode, your TV must support Dolby Atmos®.
- Enable CEC and ARC on your TV. Settings may vary by manufacturer; consult your TV's user guide.
- To control soundbar volume with the TV remote, enable System Audio Control in the CEC menu.
- CEC Function naming may differ by TV manufacturer. Consult your TV's user guide.
- The full Dolby Atmos and DTS:X experience is available when the soundbar is connected via an HDMI 2.0 cable.
- If no audio is heard through Digital Inputs, see troubleshooting.
Tip: If you have a Roku TV™, setup is easy. Connect the soundbar to the HDMI (TV eARC/ARC) port on your TV using the included cable and follow on-screen instructions.
5. CONNECT POWER
A diagram shows how to connect the power cable to the soundbar and the wall outlet.
6. INSTALL BATTERIES
Diagrams show how to remove the battery door, insert batteries, and close the battery door.
WARNING: Do not mix old and new batteries.
WARNING: Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
Operation
Connect Wireless Subwoofer
1A. AUTOMATIC PAIRING
A diagram shows pairing the subwoofer using the remote or a button on the subwoofer.
| LED State | Status |
|---|---|
| Quick flash | Subwoofer in pairing mode |
| Slow flash | Connection/Pairing Failed |
| Solid | Connected/Pairing successful |
1B. MANUAL PAIRING (IF AUTOMATIC PAIRING FAILED)
- Press and hold the PAIR button on the wireless subwoofer.
- Press the Power button (⏻) on the soundbar or remote control.
- When wireless connection is successful, the indicator will be solid orange.
A diagram shows the indicator flashing rapidly on the subwoofer. A warning states: The subwoofer is within 5m of the soundbar.
Bluetooth® Operation
1C. POWER ON/OFF
Turn the Soundbar ON/OFF using the remote control or the button on the soundbar.
2C. SELECT SOURCE
Switch between audio sources using the SOURCE button (⎗) on the remote or soundbar, or the Bluetooth ( <0xF0><0x9F><0xAA><0x95> ) button on the remote.
3C. PAIR DEVICE
Press and hold the Bluetooth ( <0xF0><0x9F><0xAA><0x95> ) button on the remote control.
4C. SEARCH ON DEVICE
Select "onn. 2.1 Soundbar" on your device.
A diagram shows a smartphone screen with Bluetooth settings, indicating "onn. 2.1 Soundbar" is connected. A diagram of the soundbar shows the Blue LED stops flashing and becomes solid when connected.
IMPORTANT: Soundbar does not include microphone and cannot operate as hands-free device.
5C. PLAY AUDIO
Play audio from your connected device.
6C. VOLUME
Volume is controlled by the Device, Remote control, or Soundbar.
WARNING: High volume levels can damage your hearing. Reduce the volume levels before pressing Play.
Bluetooth use
Your Soundbar supports music streaming from smartphones, tablets, and computers with Bluetooth capability.
Device compatibility may vary; consult your device's documentation. Once paired, your device should remain paired as long as it is within range.
If the source is changed, the Bluetooth device will disconnect. It will reconnect automatically when the source is switched back to Bluetooth.
Bluetooth has a range of up to 27 feet. Bluetooth is a compressed audio format, so streamed music may have reduced integrity compared to a wired connection.
USB Operation
1D. INSERT THE USB DEVICE
A diagram shows a USB device being inserted into the USB port on the soundbar.
2D. SELECT SOURCE
Select USB Mode using the Remote or Soundbar button.
3D. PLAY AUDIO
Tip: Supports MP3 music file format.
| Button | Action |
|---|---|
| ►II/OK | Play, pause or resume play. |
| |<< / >>| | Skip to the previous or next track. |
| +/- | Increase/decrease the volume. |
Cleaning & Care
CLEANING
- Wipe down surfaces with a light cloth.
- Never use abrasive pads to clean the device.
- Avoid using liquids to clean the device.
CAUTION: Ensure the unit is fully unplugged from the power supply before cleaning.
Specifications
Soundbar
| Property | Value |
|---|---|
| Power | 100-240V~ 50/60Hz, 30 W / < 0.5 W (StandBy) |
| USB | 5V ⎓ 500mA, Full Speed USB / FAT32 / FAT16, MP3 |
| Dimension (WxHxD) | 31.57" x 2.62" x 3.09" (802 x 66.5 x 78.5 mm) |
| Net weight | 2.64 lbs (1.2 kg) |
| Audio input sensitivity | 500mV |
| Frequency Response | 120Hz - 20KHz |
Wireless Specification
| Property | Value |
|---|---|
| Bluetooth version/profiles | V 5.3 (A2DP, AVRCP) |
| Bluetooth frequency range | 2402 MHz ~ 2480 MHz |
| Modulation Type | GFSK, π/4 DQPSK, 8DPSK |
Wireless Subwoofer
| Property | Value |
|---|---|
| Power | 100-240V~ 50/60Hz, 30 W / < 0.5 W (StandBy) |
| Dimension (WxHxD) | 4.13" x 14.56" x 10.16" (105 x 370 x 258 mm) |
| Net weight | 7.7 lbs (3.5 kg) |
| Frequency Response | 40Hz - 120Hz |
Remote Control
| Property | Value |
|---|---|
| Distance/Angle | 19.7 feet (6m) / 30° |
| Battery type | AAA (1.5V x 2) |
Troubleshooting
No power
| Problem | Cause | Solution |
|---|---|---|
| No power | Power off | Press the Power button (⏻) on the remote control or on the Soundbar. |
| Loose power cord | Ensure the power cord is securely connected. | |
| Faulty outlet | Plug a different device into the electrical outlet to verify it is working correctly. |
No audio
| Problem | Cause | Solution |
|---|---|---|
| No audio | Low Volume / Mute | Press the Mute button ( <0xF0><0x9F><0x94><0x8A> ) and increase volume. |
| Some TVs do not Pass through Digital Audio | Change TV output to AUTO. | |
| Input source | Select different Input source. | |
| Not All TVs have Audio outputs listed. | Connect directly to another device (Blu-Ray, Game System, etc.). | |
| TV set to variable audio output | Set audio output to fixed or standard, NOT variable. |
Bluetooth break-up or disconnect
| Problem | Cause | Solution |
|---|---|---|
| No audio | Bluetooth source device | Increase volume / unmute source device. |
| Wireless subwoofer and soundbar too far | Move the wireless subwoofer closer to the soundbar. Ensure it is within 5m. | |
| Source too far | Move the source device closer to the soundbar. | |
| Solid obstruction | Move source device into line-of-site of soundbar. | |
| Other wireless devices | Turn off / move away devices like wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. |
Remark: In standby mode, press VOL+, VOL−, |<<, >>|, ►II/0K in sequence to enter Flat mode. This is for debug use only, and the sound setting is Flat without DRC.
Input LEDs will flash rapidly if an unsupported format is present. Consult your TV's user manual for more detailed information.
Product Assistance
For product assistance, call 1-888-516-2630, 7 days a week from 7:00 am to 9:00 pm CST.
Find more at Walmart.com
Manufactured in China for Walmart Inc.
THIS GUIDE CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
