BOSS PX-1 Plugout FX Compact Effects Pedal

Introduction

The BOSS PX-1 is a compact effects pedal that allows you to load your favorite effects. Effects can be loaded onto the PX-1 using the BOSS EFFECT LOADER app (available for iOS and Android) via Bluetooth or USB connection. New effects are continuously added to Roland Cloud.

The device features pre-installed effects and slots for additional effects, managed through the app.

Preparation

To use the PX-1, you need to:

• Register your product and create a Roland Account by visiting www.boss.info/start.
• Install the "BOSS EFFECT LOADER" app on your smartphone from https://roland.cm/px-1_app.

Names and Functions of Each Part

The PX-1 features various controls and connections:

• DC IN Jack (6): Connect the included AC adapter for power.
• CHECK Indicator (7): Shows the effect's ON/OFF status.
• OUTPUT A (MONO) / OUTPUT B Jacks (3, 4): Connect to your amplifier or monitor. Supports stereo output.
• INPUT A (MONO) / INPUT B Jacks (4): Connect your guitar or other effects.
• CTL 1,2/EXP Jack (5): Connect external footswitches (e.g., FS-5U, FS-6, FS-7) or expression pedals (e.g., EV-5) to control functions.
• Pedal Switch (6): Engages/disengages the effect or switches functions.
• Display (7): Shows current settings and parameters.
• Knobs (8, 9, 10): Left, Center, and Right knobs for adjusting parameters.
• USB Type-C Jack (11): For firmware updates and connecting to the BOSS EFFECT LOADER app.
• MIDI IN Jack (12): Receives MIDI clock signals for tempo synchronization.

Turning Power On/Off

To Turn On: Connect the AC adapter to the DC IN jack, then turn on your amplifier. The PX-1 powers on and starts with effects off.

To Turn Off: Turn off your amplifier, then disconnect the AC adapter or USB cable.

Note: The PX-1 operates on AC power only; it does not support battery operation.

Playing

Loading Effects

Connect the PX-1 to the BOSS EFFECT LOADER app via Bluetooth. Select an effect in the app and tap "Install" or "Select". The PX-1 will automatically disconnect from Bluetooth upon completion.

Setting Loaded Effects

Once an effect is loaded, its parameters can be adjusted using the PX-1's knobs and switches. The display shows the current parameter. External footswitches (CTL 1/2) and expression pedals (EXP) can be assigned to control specific parameters or functions.

Other Functions (MENU Screen)

The MENU screen provides access to various functions:

• SELECT EFFECT: Switch between pre-installed and loaded effects.
• BLUETOOTH: Manage Bluetooth connection settings.
• SWAP FUNCTION: Assign effects to SIDE A and SIDE B for quick switching using CTL pedals.
• WEB MANUAL: Access a QR code to download the full manual.
• VERSION: View firmware and app versions.
• FACTORY RESET: Restore the PX-1 to its original factory settings. This will remove all loaded effects except the pre-installed ones.

Connecting External Pedals

The PX-1 supports external control via footswitches (FS-5U, FS-6, FS-7) and expression pedals (EV-5, FV-500H/L). These can be connected to the CTL/EXP jack to control various parameters or functions like effect on/off, parameter switching, or wah/volume sweeps.

Restoring to Factory Default Settings (Factory Reset)

To reset the PX-1 to its factory settings, navigate to the FACTORY RESET menu and confirm the action. This process will delete all loaded effects, leaving only the original pre-installed effects.

Welcome to the World of Roland Cloud

Roland Cloud is a platform for high-quality sound sources and software. By entering the provided activation key, users can receive a 6-month Ultimate membership, granting access to a wide range of content.

Steps involve product registration, creating a Roland account, entering the activation key via the Roland Cloud website, and installing the Roland Cloud Manager application on a computer.

Effect Algorithms

The PX-1 supports loading various BOSS effects. Each effect offers unique sound shaping capabilities. Parameters for each effect can be controlled via the unit's knobs, external footswitches (CTL 1/2), and expression pedals (EXP).

OD-1 Over Drive

Provides a soft, clear overdrive sound that faithfully reproduces nuances in playing without altering the guitar's inherent tone.

SP-1 Spectrum

Emphasizes specific frequencies to alter the tone, particularly effective for high frequencies.

PH-1 Phaser

Delivers a wide range of phase effects, from very slow to fast, with a sharp phase sound.

SG-1 Slow Gear

Enables violin-like playing techniques by controlling attack time, allowing for smooth volume swells.

CS-1 Compressor Sustainer

Achieves distortion-free long sustain. The TREBLE mode emphasizes high frequencies for balanced sustain, especially with chords.

TW-1 T Wah

Controls wah effects based on picking dynamics, offering sounds not achievable with traditional pedal wahs.

SD-1 Super Overdrive

Produces a soft, clear distortion similar to tube amps, with a tone control for adjusting treble.

DS-1 Distortion

A versatile distortion pedal capable of mellow soft distortion to intense hard distortion.

CE-2 Chorus

Recreates the classic chorus sound of the original CE-1, BOSS's first chorus pedal.

BF-2 Flanger

Offers a wide range of flanging effects through the combination of MANUAL, DEPTH, RATE, and RES controls.

PN-2 Tremolo/Pan

Creates panning effects that move sound left and right, or tremolo effects that modulate volume cyclically. Enables stereo output simulation for mono instruments.

OC-2 Octave

A low-noise octave effect providing 1st and 2nd octave down sounds, with controls to mix direct, 1st octave, and 2nd octave signals.

PS-2 Pitch Shifter/Delay

Combines pitch shifting and digital delay in a compact unit. Offers pitch shifting up to ±1 octave and digital delay from 30ms to 2 seconds.

VB-2 Vibrato

Provides a vibrato effect suitable for electric guitars, pianos, and other electronic instruments. Features latch, unlatch, and bypass modes, with a rise time control for natural vibrato.

DD-2 Digital Delay

The first compact digital delay, offering variable delay times from 12.5ms to 800ms and improved frequency response.

DF-2 Super Distortion & Feedbacker

A unique distortion pedal with a feedback function. Allows easy generation of feedback sounds by holding the pedal switch after picking.

Troubleshooting

No Power: Ensure the specified AC adapter (PSA-100) or a compatible USB AC adapter (5V/0.5A or higher) is correctly connected.

No Sound: Verify that the output device is properly connected to the OUTPUT jack.

Error Messages

PLEASE RE-INSTALL THIS EFFECT: The selected effect model is not compatible with the PX-1's firmware. Update to the latest firmware.

UNSUPPORTED: The selected model is not supported. The text "UNSUPPORTED" will appear below the model name.

Specifications

• Current Consumption: 260mA (AC Adapter), 420mA (USB)
• Dimensions: 73(W) x 125(D) x 56(H) mm
• Weight: 400g (excluding AC adapter)
• Accessories: Safety/Usage guides, AC Adapter, Roland Cloud Activation Card, Warranty.
• Optional Products: Footswitches (FS-5U, FS-6, FS-7), Expression Pedals (FV-500H, FV-500L, EV-30, EV-5), TRS/MIDI Connecting Cables.

Note: Specifications are subject to change without notice. Refer to the Roland website for the latest information.