HelloBaby HB6339 Digital Wireless Video Baby Monitor

Introduction

Thank you for purchasing the HB6339 Baby Monitor. This monitor allows you to see and hear your baby sleeping or playing in their room anytime. Please retain your original dated sales receipt for warranty service.

Package Contents

• Parent unit x 1
• Camera unit x 1
• User manual x 1
• Wall-mounting kit x 1
• Power Adapter x 2

1. Safety Instructions

CAUTION: Keep the device away from children.

• Strangulation Hazard: Keep cords out of the reach of children (more than 3ft/0.9m away). Never use extension cords with AC Adapters. Only use provided AC Adapters.
• Choking hazard: Product contains small parts; be careful when unpacking and assembling.
• Read and keep instructions: All safety and operating instructions should be read before use. This product cannot replace responsible adult supervision.
• Water and moisture: Designed for indoor use only. Do not expose to rain, moisture, dripping, or splashing. Do not place liquid-filled objects on or near the product. Do not use near water.
• DO NOT: Use if the cord or plug is damaged. Contact service@hellobaby.net.cn for inspection and repair. Do not attempt to repair or adjust electrical or mechanical functions, as this voids the guarantee.
• Ventilation: Do not use on beds, sofas, rugs, or in enclosed areas that may block ventilation openings or impede airflow.
• Keep away from sources of heat: Do not expose to direct heat sources like candles, radiators, heat registers, stoves, or appliances that emit heat. Do not leave in direct sunlight.
• Power source: Use only the provided AC power adapters (Parent Unit: 5V DC 1A, Camera Unit: 5V DC 1A).
• Damage requiring service: Service by qualified personnel only if objects have fallen or liquid has spilled into the product, units have been exposed to rain, do not operate normally, or enclosure is damaged.

2. Warranty Terms

One-year warranty from the original purchase date against defects in workmanship and materials. Contact after-sales service via email for warranty or support issues.

3. Installation Guidelines

• Establish a radio link between parent and camera units. Range is affected by environmental conditions.
• Large metal objects (refrigerators, mirrors, filing cabinets, metallic doors, reinforced concrete) between units may block the radio signal.
• Signal strength may be reduced by solid structures (walls) or other electronic equipment (TVs, computers, cordless/mobile phones, fluorescent lights, dimmer switches).
• Other 2.4GHz products (Wi-Fi routers, Bluetooth systems, microwave ovens) may cause interference. Keep the baby monitor at least 5ft (1.5m) away from such products or turn them off if interference occurs.

4. Placement of the Baby Monitor

• Camera can be placed on a desktop or mounted on the wall.
• Do not place on soft quilts, blankets, or in corners of cupboards/shelves.
• Keep the monitor away from heat sources (radiators, chimneys, cookers, direct sunlight) and electronic devices (TV sets, microwave ovens, radios). Move the camera if interference occurs.
• Place the camera within 6 feet (2 meters) of the area being monitored for optimum performance.

5. Getting Started

5.1 Turn On the Baby Unit:

1. Insert the DC plug of the power adapter into the DC jack in the rear of the Baby Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. The power LED will light up once the adapter is connected.

5.2 Turn On the Parent Unit:

1. Insert the DC plug of the power adapter into the DC jack on the side of the parent Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. Press and hold the power key for 3 seconds on the top of the parent unit.
4. The power LED will light up, and the image will display on the LCD.

5.3 Infrared Night Vision (Automatic)

The infrared night vision function allows the camera to pick up images in dark or low light conditions. In this mode, only black and white images are displayed. The optimum image is achieved when the baby unit is 6ft (2m) away from the object. When the camera is in night vision mode, the ☾ icon will be displayed on the top of the screen.

6. Product Overview

6.1 Icons Overview:

6.2 Parent Unit Overview:

Parent Unit Controls:

• Charging LED
• Power LED
• Sound Level Indicator
• Left Key
• Exit/Two Way Talk
• Zoom / View / Scan
• Up key
• Right Key
• Down Key
• Menu/OK
• Power key
• MIC
• 3.2" Diagonal TFT LCD

Parent Unit Rear/Bottom:

• Antenna
• Reset Key
• DC-jack
• Stand
• Speaker

6.3 Baby Unit Overview:

Baby Unit Components:

• MIC
• Light sensor
• Infrared LEDs
• Lens
• Speaker
• Power LED
• Antenna
• DC-Jack
• Pair key
• Temperature sensor

7. Key Operation

• 7.1 Turn On/Off: Press and hold the power key for 3 seconds.
• 7.2 UP ▲ Key: Press once to tilt camera up one step; press and hold to tilt continuously.
• 7.3 DOWN ▼ Key: Press once to tilt camera down one step; press and hold to tilt continuously.
• 7.4 LEFT ◄ Key: Press once to pan camera left one step; press and hold to pan continuously.
• 7.5 RIGHT ► Key: Press once to pan camera right one step; press and hold to pan continuously.
• 7.6 Camera View/Scan: Press the scan key to view/scan cameras. During scan mode, the scan icon ? will be displayed. Each camera's video displays for 10 seconds before changing.
• 7.7 Digital Zoom: Press and hold the zoom key (?) for 2 seconds to zoom in/out.
• 7.8 Two Way Talk: Press and hold the talk key (?) to enter two-way talk mode. A microphone icon will be displayed. Release the key to stop. The parent unit speaker is muted during this mode.

8. Menu Operation

8.1 Pairing the Camera and Parent Units

The baby unit is pre-registered. Re-register if the link is lost.

8.1.1 Add Camera

1. Press MENU, then the menu pops up.
2. Press ◄/► keys until the camera icon ? is selected (red box).
3. Press OK to enter the sub-menu, then use ▲/▼ keys to select the desired camera.
4. Press OK to enter the sub-menu; press ▲/▼ keys to select '+' then press OK.
5. When the PAIR icon ▶️ is displayed on the LCD, press the PAIR button on the back of the camera.
6. A successful pairing icon ✔️ will show on the LCD.
7. If it fails, repeat the steps.

8.1.2 Delete Camera

1. Press MENU, then the menu pops up.
2. Press ◄/► keys until the camera icon ? is selected (red box).
3. Press OK to enter the sub-menu, then use ▲/▼ keys to select the camera to delete.
4. Press OK to enter the sub-menu; press ▲/▼ keys to select ?️ then press OK.
5. Press OK to confirm the option.

8.2 Volume

1. Press MENU, then the menu pops up.
2. Press ◄/► keys until the Volume icon ? is selected (red box).
3. Press OK to enter the sub-menu.
4. Press ◄/► keys to select the desired volume level (1-5).

8.3 Display Brightness

1. Press MENU, then the menu pops up.
2. Press ◄/► keys until the brightness icon ? is selected (red box).
3. Press OK to enter the sub-menu.
4. Press ◄/► keys to select the desired brightness level (1-5). Default is level 3.

8.4 Temperature Unit Setting

1. Press MENU, then the menu pops up.
2. Press ◄/► keys until the temperature icon ?️ is selected (red box).
3. Press OK to enter the sub-menu.
4. Press ◄/► keys to select °F or °C.
5. Press OK to confirm.
6. Press Exit key.

8.4.1 Temperature Alarm Setting

1. Press ◄/►/▲/▼ keys to select ?️ for turn on alarm function; Press OK to confirm.
2. Press ◄/►/▲/▼ keys to select ? for turn off alarm function; Press OK to confirm.

8.4.2 Set Temperature Hi/Lo Alert Limits

1. Press ?️ to select for Hi/Lo limits settings.
2. Press ▲/✔ keys to adjust the Hi limit when (red) is selected.
3. Press ▲/✔ keys to adjust the Lo limit when (green) is selected.

Note: High temperature alarm range: 20-40°C (default 36°C). Low temperature alarm range: 0-19°C (default 8°C). The temperature icon turns red and beeps when limits are exceeded. Press any key to stop.

8.5 Lullaby Setting

Soothe your baby with lullabies from the camera unit.

1. Press MENU, then the menu pops up.
2. Press ◄/►/▲/▼ keys until the lullaby icon ? is selected (red box).
3. Press OK to enter the sub-menu.
4. Press ▲/▼ keys to select one of 8 lullabies for single or loop playback (▶️ or ?).
5. Press OK to confirm. Default is OFF.

8.6 Alarm Setting

1. Press MENU, then the menu pops up.
2. Press ◄/►/▲/▼ keys until the alarm icon ? is selected (red box).
3. Press OK to enter the sub-menu. Press ◄/►/▲/▼ keys to select the alarm time.
4. Press OK to confirm.
5. Press Exit key.

Notes: Minimum alarm unit is 0.5 hour, maximum is 5 hours (7 levels). Alarm icon ? displays when active. Default is OFF. Press any key to turn off ringing alarm. Alarm rings for 1 minute, then repeats after 3 minutes, up to three times.

8.7 Energy Saving

Control sound activation. If no sound is detected for 30 seconds, audio transmission and the parent unit screen turn off. When sound above the sensitivity level is detected, transmission resumes.

To change ECO level:

1. Press MENU, then the menu pops up.
2. Press ◄/► keys until the ECO icon ♻️ is selected (red box).
3. Press OK to enter the sub-menu, then press ◄/► keys to select desired level.
4. Press OK to confirm.
5. Press Exit key.

Note: ♻️ (Low sensitivity): Baby must make a lot of sound. ♻️ (High sensitivity): Baby does not need to make much sound.

8.8 Language Setting

1. Press MENU, then the menu pops up.
2. Press ◄/►/▲/▼ keys until the language icon ? is selected (red box).
3. Press OK to enter the sub-menu, then press ◄/►/▲/▼ keys to select the desired language.
4. Press OK to confirm.
5. Press Exit key.

9. Technical Data

10. Trouble Shooting

11. Maintenance

• Clean with a slightly damp or anti-static cloth.
• Never use cleaning agents or solvents.

12. Disposal Guide for Battery and Product

• Do not attempt to repair or adjust any electrical or mechanical functions of the unit.
• Dispose of the product in an environmentally responsible way. Take it to designated collection points or contact the store where purchased.

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C or Incinerate. Follow Manufacturer's Instructions.

• Disposal of a battery into fire or a hot over, or mechanically crushing or cutting can result in an explosion.
• Leaving a battery in extremely high temperatures can result in explosion or leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in explosion or leakage of flammable liquid or gas.
• The battery shall not be exposed to excessive heat such as sunshine or fire.

FCC & ISDE Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, try to correct the interference by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician.

This device meets the exemption from routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

Radiation Exposure Statement for camera: This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

SAR Statement for Monitor: Specific Absorption Rate (SAR) information: This Monitor meets the government's requirements for exposure to radio waves.

EU Declaration of Conformity (DOC): Videotimes declares that the radio equipment type is in compliance with RED Directive 2014/53/EU. The full text is available at www.hellobaby.net.cn.

Manufacturer Information

Model: HB6339

Responsible Party (US): Startline LLC
Add: 22 Hazelwood Drive, Jericho, NY 11753
Tel: 1-516-681-3729

Authorized UK Representative (UK): APEX CE SPECIALISTS LIMITED
Add: 89 Princess Street, M14HT, UK
info@apex-ce.com

Manufacturer: Shenzhen Videotimes Technology Co.,Ltd
Room 2106, Building 11, Tianan Yungu Phase II, Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong, China