Redragon K632 RGB PRO Noctis Pro Mechanical Gaming Keyboard

US UK Warranty Information

Thank you for choosing Redragon. To protect your rights and for better customer service, please read the following warranty rules carefully.

• Within 18 months of purchase date, repair is guaranteed for failure due to electrical circuit problems.
• Damages such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters are not included.
• Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty.

OS Support

Supported Operating Systems: WinXP/Vista/Win7/Win8/Win10/Win11

How to Connect the Keyboard with a Computer

Wired Connection

1. Slide the ON/OFF switch on the bottom of the keyboard to OFF.
2. Connect the keyboard to your computer using the provided USB A to USB Type C cable.
3. The computer will recognize and configure the keyboard automatically.
4. The keyboard is ready for use upon completion of configuration.
5. Charging begins when the keyboard is powered up. The LED marked with 'M' lights red and turns white when fully recharged.

2.4G Wireless Connection

1. Slide the ON/OFF switch on the bottom of the keyboard to ON.
2. Plug the nano USB receiver into an available USB port on your computer. The computer will recognize and configure the keyboard automatically.
3. The keyboard is ready for use upon completion of configuration.
4. Pairing may be necessary in some cases. Turn on the keyboard and press [FN1]+[2.4G] for approximately 3 seconds. The LED marked with 'M' flashes green. Plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will pair automatically. Ensure the keyboard has sufficient power before pairing.
5. The indicator will flash when the battery is low. Recharge the keyboard promptly, or it will turn off automatically.

Bluetooth Connection

1. Slide the ON/OFF switch on the bottom of the keyboard to ON.
2. Press [FN1]+[BT1] (or [BT2]/[BT3] for other Bluetooth devices). The LED marked with 'M' flashes blue (or cyan/magenta for others).
3. Turn on Bluetooth on your computer or smartphone and scan for available devices. Select "BT3.0KB" or "BT5.0 KB" to connect automatically.

Function Introduction

• With standard USB, 2.4G, and BT connections, the keyboard can be used on computers without software or driver installation.
• Key combinations with [FN1]/[FN2] keys:
• FN1 + [ESC] = `~
• FN1 + [1!] to [0=] = F1 to F12
• FN1 + [P] = PRTSC
• FN1 + [{] = HOME
• FN1 + [}] = END
• FN1 + [:] = PGUP
• FN1 + ["] = PGDN
• FN1 + [.] = INSERT
• FN1 + [/] = DELETE
• FN1 + [TAB] = White lighting test (press again to return to previous setting).
• FN2 + [Z/X] = Backlight rolling speed adjustment.
• FN2 + [Enter] = Backlight color options.
• FN1 + [WIN] = Lock/unlock Windows key for gaming.
• FN2 + [Z] = Slow down backlight running speed.
• FN2 + [A/S/D/W] = Arrow keys (↑/↓/←/→).
• FN2 + [CapsLK] = Reset keyboard to default settings.

Multimedia Function on F9-F12

• FN2 + 9: Browser
• FN2 + 10: Research
• FN2 + 11: Calculator
• FN2 + 12: E-mail

How to Set the Backlighting

1. Press FN2 + Backspace to enter setting mode. The AWSD keys default to green.
2. Press FN2 + Backspace again. The CapsLK key flashes red. Press a desired key for color setting. Single key colors can be cycled through Red/Green/Blue/Yellow/Purple/Cyan/White/OFF with each click.
3. Once the desired color is set, press FN2 + Backspace again to save the setting.
4. Press FN2 + 8 to exit setting mode.

How to Charge Keyboard

Use the provided USB A to USB Type C cable. Connect the keyboard to a computer for charging. The keyboard's LED indicator will turn red. The LED indicator also turns red when the keyboard is out of battery.

Indicators on Keyboard (Top Left)

• 'A' indicates Caps Lock status.
• 'M' indicates connection mode status.

FAQ

1. Keyboard not responding: Check if the keyboard's USB cable is correctly inserted into the computer's USB port, or try another USB port.
2. Liquid spill on keyboard: Immediately unplug the keyboard's USB cable. Wipe off excess liquid and place the keyboard in a dry, ventilated area. Ensure the keyboard is completely dry before next use.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

California Proposition 65

WARNING: Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure - www.P65Warnings.ca.gov

Product Information (Bottom Right)

Model: K632RGB-PRO/8652

Name: 说明书 (User Manual)

Date: 2022-6-13

Material: 80g writing paper

Printing: Single black double-sided printing

Page: 1 OF 1

Drawn by: 雷国建 (Lei Guojian)

File Number: [Not Specified]

Reviewed by: [Not Specified]

Approved by: [Not Specified]

Version: A.0