REDRAGON KITAVA LITE
94 KEY WIRED MECHANICAL KEYBOARD
Welcome and Warranty Information
Dear user, Thank you for choosing a REDRAGON product. To protect your rights and for better customer service, please read the following warranty rules carefully.
Warranty Terms:
- Within 18 months of purchase date, repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
- Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty.
Getting Started and Key Functions
How to Plug In
Connect the Type-C cable to the USB cable with the keyboard and PC. The keyboard is plug and play, no driver is needed.
Key Function Introduction: Recording Light
- Press FN + LR1/LR2 to select the profile.
- Press FN + Home to get ready for recording.
- Set the desired keys.
- Press FN + End to save and quit.
- Press FN + LR1/LR2 to play recording.
- Press FN + PGUP to delete recording.
Backlight Settings
- FN + [ALT] -R: Switch the backlight in 9 patterns.
- FN + [CTR] -R: Save record setting.
- FN + [ESC]: Back to factory setting.
- FN + [Up Arrow]: Increase backlight brightness level.
- FN + [Down Arrow]: Decrease backlight brightness level.
- FN + [Left Arrow]/[Right Arrow]: Adjust light rotating speed.
Pre-set Lighting Modes
- FN + 1 = FPS mode: ASDW, ↑, ↓, ←, →, ESC keys light up.
- FN + 2 = CF mode: AS DW, Ctrl, Shift, Alt, Space, R, G, Q, E, B, 1-5, Tab, F1-F3, PrintScreen keys light up.
- FN + 3 = COD mode: Q, W, E, R, T, Y, A, S, D, F, G, C, V, 1-7, Ctrl, Shift keys light up.
- FN + 4 = RTS mode: Q, W, E, R, A, S, D, G, X, Z, F, K, L, H, M, N, U, Y, T, P, Space, 1-0, Ctrl, Shift, Alt keys light up.
- FN + 5 = LOL mode: Q, W, E, R, D, G, F, B, Ctrl, Alt, Tab, Space, ~, 1-6, Esc keys light up.
- FN + 6 = Car Race mode: A, S, D, W, R, ↑, ↓, ←, →, Ctrl, Shift, Alt keys light up.
- FN + 7 = NBA mode: A, F, S, W, R, E, Ctrl, Shift, Alt, Space, ↑, ↓, ←, →, Z, X, C, V, 1, 2, 3, 4 keys light up.
- FN + 8 = LOL mode: Q, W, E, R, D, F, B, 1-6 keys light up.
Additional Functions
- FN + [ = INS
- FN + ] = DEL
- FN + ; = HOME
- FN + ' = END
- FN + . = PGUP
- FN + / = PGDN
Multimedia Key Functions
- FN + F1 = Computer
- FN + F2 = Search
- FN + F3 = Calculator
- FN + F4 = CD
- FN + F5 = Previous Track
- FN + F6 = Next Track
- FN + F7 = Play/Pause
- FN + F8 = CD Stop
- FN + F9 = Mute
- FN + F10 = Volume Down
- FN + F11 = Volume Up
- FN + F12 = Lock Keyboard
Frequently Asked Questions (FAQ)
- Question: If the keyboard doesn't respond, what should I do? Answer: Please check if the keyboard's USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
- Question: What to do if liquid is spilled on the keyboard? Answer: If you spill liquid on the keyboard, please unplug the keyboard's USB cable from the computer immediately. Wipe off excess liquid and place the keyboard in a dry and ventilated place. Ensure the keyboard dries naturally before the next use.
FCC Compliance Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Product Information
This section contains technical and production details.
| Model Number: | K636LGR-R/8735 |
| Product Name: | Operating Instructions |
| Date: | 2023-7-12 |
| Page Number: | 1 OF 1 |
| Drafter: | Lei Guojian (雷国建) |
| Reviewer: | Xiang Minqi (香敏琪) |
| File Number: | [Not Specified] |
| Material: | 80g Writing Paper (80g书写纸) |
| Printing: | Single Black Double-Sided Printing (单黑色双面印刷) |
| Version: | A.1 |
(Note: The dimensions 100x100mm folded refer to the physical size of the printed manual, not the product.)
(Visual description: The document includes the Redragon logo, a stylized dragon head.)
