LUTEC Gemini XF Outdoor Wall Light

Technical Data

Supply Voltage: 220-240 V~, 50/60 Hz

Bulb Type: LED (9.5W)

The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.

IP54 Rated (Splash-proof)

Class I product, must be connected to earth.

Conformity with all relevant EC Directive requirements.

Safety Instructions

Safety instructions are available on the LUTEC website: www.lutec.com/service/safetyinstructions. They are also included in the packaging.

This product complies with ERP Regulation (EU) 2019/2020 and Amending Regulation (EU) 2021/341.

Due to harsh coastal conditions (high humidity, salt exposure), regular cleaning with a dry cloth (no detergents) is advised.

This product contains a light source of energy efficiency class <F>.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

Warranty Conditions

All LUTEC products meet high quality standards and undergo strict quality control.

Warranty Period: 5 years (2 years for Solar Energy range products). An additional 15-year anti-corrosion guarantee is offered on galvanized and resin outdoor luminaires.

The guarantee applies to products purchased within the European Union and/or Switzerland.

Excluded: replaceable bulbs, batteries, starters, wear & tear parts.

LUTEC Europe may repair or replace the product. Costs for assembly, disassembly, transport, etc., are not covered.

Warranty is valid if products are used as intended, not modified, maintained as per instructions, installed correctly, and use approved bulbs. No chemical or physical damage from improper handling.

For warranty claims, contact your local dealer or LUTEC Europe directly. Proof of purchase is required.

Statutory warranty rights remain unaffected.

Guarantor: LUTEC Europe NV, Herentalsebaan 425, B-2160 Wommelgem - Belgium. Contact: +32 (0)3 284 51 62, info@lutec-europe.com, www.lutec.com.

Installation Guide

The installation process involves several steps to ensure the luminaire is securely and correctly fitted.

• Step 1: Mount the base plate to the wall using the provided screws.
• Step 2: Connect the electrical wires (e.g., live, neutral, earth) to the luminaire's internal wiring.
• Step 3: Attach the main luminaire body to the mounted base plate.
• Step 4: Secure any decorative covers or diffusers.
• Step 5: Ensure all screws are properly tightened for stability.
• Step 6: The luminaire is now installed. Enjoy your new lighting.

The luminaire is rated IP54, meaning it is protected against dust ingress and splashing water from any direction.