Zidoo UHD3000 4K Hi-Fi Media Player

Introduction to Hardware

The Zidoo UHD3000 is a 4K Hi-Fi Media Player equipped with multiple audio input/output ports and data transmission ports. This section details the device's interface.

1. Front Panel

The front panel features an IR Receiver, LED Display, HDD1, HDD2, USB2.0, and POWER port.

2. Back Panel

The back panel includes Antenna ports, USB3.0, HDMI OUT (Main), Type-C, LAN (Gigabit), HDMI OUT (Audio Only), HDMI IN, IR IN, OPTICAL, COAXIAL, XLR L/R channels, POWER SWITCH, RS232, IR OUT, and CVBS L/R Channels.

Antenna Installation: Insert the two provided antennas into the antenna ports as shown in the diagram.

Notices:

• Load/change the hard disk only after turning off the power. Format new hard disks before loading.
• Prevent the cooling fan orifice from being blocked.
• Avoid liquid contact with the device to prevent damage.
• Unauthorized maintenance personnel are not allowed to open the case.

Performance Parameter

Loading Hard Disk

The UHD3000 features two 3.5-inch HDD bays with high-speed SATA jacks. Gently push the 3.5-inch hard disk with a SATA interface into the HDD bay. The device supports hard disks up to 10TB maximum.

Notice: Do not load or change the hard disk while the device is powered on to avoid damage to the disk and data. Supported hard disk formats include EXT3, EXT4, NTFS, FAT32, and EXFAT.

Remote Control

1. Description of functions buttons

The remote control has dedicated buttons for various functions including Power, Learning Area, Numbers, Resolution, Delete, Pop Menu, Home, Return, Menu, Subtitle, Audio, Volume, Repeat, Mouse Light, and Function Keys.

2. Introduction to Learning button

The learning function allows the remote control to copy functions from other remote controls, enabling it to operate two devices. To enter learning mode, press and hold a key for 3 seconds until the indicator light is always on, then press the Learning KEY. Align the infrared emission windows of both remotes within 3cm and press the desired key on the other remote. The indicator light will stop blinking if learning is successful. Press the KEY to exit learning mode. The Light KEY turns the backlight on/off.

3. Bluetooth Pairing

To pair the remote control via Bluetooth, aim it at the machine within 30cm and press the Down Key and Menu Key simultaneously for at least 5 seconds until the indicator light blinks. Pairing is successful when the indicator light stops blinking.

Connection with Device

1. HDMI connects to the TV

The UHD3000 offers two HDMI connection modes:

• Stand-up Output Mode: While the TV and Media Player are off, connect one end of the HDMI cable to the HDMI OUT port and the other end to the TV's HDMI IN port.
• Double Output Mode: This mode separates video and audio. Connect one side of an HDMI cable to the HDMI OUT AUDIO ONLY interface and the other side to an amplifier. Then, use another HDMI cable to connect the HDMI OUT MAIN interface to the TV's HDMI IN interface. Ensure both the TV and Media Player are powered off before connecting.

2. DAC analog audio

1) DAC audio switch: Enable this switch to connect speakers via analog XLR balance or RCA ports. This switch decodes the XMOS output (DSD pass-through) to the DAC, supporting native DSD 512 and PCM 768 high-sampling. When the DAC Audio switch is on, there will be no sound from HDMI and SPDIF.

2) Filtering Features: Options include BRICK_WALL_FILTER, CORRECTED_MIN_PHASE_FAST, APODIZING_FAST, MIN_PHASE_SLOW, MIN_PHASE_FAST, LINEAR PHASE_SLOW, and LINEAR PHASE_FAST.

3) Analog Audio Volume: This setting controls the volume for the DAC decoder.

4) XLR Port polarity: Options include Normal and Reverse.

3. Connect AV cable with the TV

The connection method is similar to HDMI. Connect the AV cable before powering on the device.

HDMI & DAC analog audio

1. HDMI Output Setting

For double HDMI output, the main port connects to the TV or projector, and the deputy port connects to a power amplifier. Three modes are available:

• Master Port and Subport Separation Model: Video outputs from the main port, and audio outputs from the deputy port for separation.
• Master Port + Subport Model: The main port outputs audio and video, while the deputy port outputs audio.
• Master Port Mode: The main port outputs audio and video, with no audio output from the deputy port.

Tips: Video is played by the master port, and audio is played by the subport for great separation.

2. DAC analog audio

1) DAC audio switch: Turn on this switch to connect speakers via analog XLR balance or RCA ports. This decodes the XMOS output (DSD pass-through) to the DAC for highest native DSD 512 and PCM 768 high-sampling. When this switch is on, HDMI and SPDIF will not output sound.

2) Filtering Features: Select from various filter properties like BRICK_WALL_FILTER, CORRECTED_MIN_PHASE_FAST, APODIZING_FAST, MIN_PHASE_SLOW, MIN_PHASE_FAST, LINEAR PHASE_SLOW, and LINEAR PHASE_FAST.

3) Analog Audio Volume: This setting adjusts the volume for the DAC decoder.

4) XLR Port polarity: Choose between Normal and Reverse polarity for XLR connections.

Initialization

This section guides you through the initial setup process for an optimal watching experience.

1. Language of the system

Select your preferred system language from the available options: Chinese (Simplified), Chinese (Traditional), Turkish, English, Vietnamese, and more.

2. Bluetooth Match-Up

Align the remote controller with the media player and press the Page-Down KEY and Menu KEY simultaneously for at least 5 seconds until the indicator light blinks. The light will turn off upon successful matching.

3. Screen scaling

Adjust the screen display range using the LEFT or RIGHT buttons on the remote control or the mouse wheel to ensure the image is displayed correctly on the TV screen.

4. Network settings

Choose either a WiFi network or an Ethernet network to connect the media player. Follow the on-screen prompts to select your network, enter the password if necessary, and complete the setup.

• WiFi: Select the SSID and enter the password to connect.
• Ethernet: The connection works after plugging in a LAN cable.

System Update by OTA

Zidoo provides irregular firmware updates. Access the system update icon in the APP center to perform online or local updates. You can enable automatic detection of the latest version for timely updates.

1. Online Update

Check for new versions and initiate the upgrade process. The system will automatically upgrade, so do not power off the device during the update.

2. Local update

Download the update file from the official website or forum and copy it to a USB disk. Click "local update" to select the file. The system will verify the file's integrity. During the upgrade, do not power off the device. The system will restart automatically once the update is complete.

Special note

To ensure user experience, Zidoo updates firmware irregularly. This manual may not perfectly align with the product's current version.

Warning notice

• Do not expose the equipment to water splashing or drops. Do not place it on surfaces containing liquid.
• The power plug is the disconnecting device. Ensure the socket is installed near the product and is easily accessible.
• This product is classified as Class I equipment and requires grounding measures.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: 1) it must not cause harmful interference, and 2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, try reorienting the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer or technician.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement

This device complies with RF radiation exposure limits for an uncontrolled environment. The transmitter must not be co-located or operating with any other antenna or transmitter. A minimum distance of 20 cm must be maintained between the radiator and the user's body.