ZKTECO LB330 Parking Barrier User Manual

Date: June 2022

Doc Version: 1.0

About the Company

ZKTECO is a leading manufacturer of RFID and Biometric readers, including fingerprint, facial, and finger-vein technologies. Their product range encompasses Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers, and consumer products like battery-operated fingerprint and face-reader door locks. ZKTeco's security solutions are available in over 18 languages. The company operates a 700,000 square foot ISO9001-certified manufacturing facility, overseeing product design, component assembly, and logistics.

Founded on a commitment to research and development in biometric verification, ZKTeco initially focused on PC security and identity authentication. Over time, they have built a comprehensive identity authentication and smart security ecosystem. Established in 2007, ZKTeco is recognized as a global leader in the biometric verification industry, holding numerous patents and consistently being named a National High-tech Enterprise.

About the Manual

This manual provides instructions for the operation of the LB330 Parking Barrier. Figures within this manual are for illustrative purposes and may not precisely match the actual product.

Document Conventions

GUI Conventions

Convention	Description
< >	Button or key names for devices (e.g., press <OK>).
[ ]	Window names, menu items, data table, and field names (e.g., [New User] window).
/	Multi-level menus separated by forward slashes (e.g., [File/Create/Folder]).

Symbols

Convention	Description
?	Notice or attention in the manual.
?	General information to help perform operations faster.
⭐	Significant information.
⚠️	Caution to avoid danger or mistakes.
?	Statement or event that warns of something or serves as a cautionary example.

Overview

The LB330 is designed for small parking spaces, accommodating two-wheelers and small cars. It is a cost-effective barrier featuring a high-performance DC brushless motor and boom arms of 1.5 or 2 meters. The boom arm is spherical. It includes built-in LED lights that function as night lights, activated by a low-light sensor. The barrier is equipped with two remote controllers and is compatible with LPR cameras, UHF readers, and biometric devices.

Features and Functionalities

Fastest operating speed of 5s, adjustable based on boom arm length.
Digital control monitoring supports delay automatic close functions.
High safety, supports manual rise of the boom arm during power failure, and anti-smash functions.
Adjustable rising/fall angle with a digital encoder for automatic position limiting, ensuring accurate position control.
The barrier boom rebounds when obstructed.
Invertible for left and right installation, with a simple and compact transmission mechanism for easy on-site installation.

Appearance and Dimensions

Diagram Description: The diagram shows the ZKTECO LB330 Parking Barrier with its boom arm extended. Dimensions are provided, indicating the boom arm length of 2 meters. The main unit has a height of 812mm, with the base at 690mm and a width of 110mm. The base dimensions are also detailed, showing mounting hole placements.

Specifications

Model	LB330
Operating Speed	3s to 5s (Configurable)
Boom Length	2m
Boom Type	Round Boom with LED Light
Chassis Dimensions (LWH)	140110812 (mm)
Weight	12Kg
Motor Type	24V DC Brushless Motor
Output Power	40W
Output Current	2A
Working Voltage	DC 24V
Power Supply	AC 220V, 50Hz
Operating Temperature	-30°C to +60°C
MCBF	1 million times
Remote Control Distance	≥30m
Operating Humidity	≤90%RH

Installation Procedure

5.1 Installation Precautions

Install the parking barrier on a flat surface. A cement foundation is required if the ground is not solid and flat.
The boom arm length can be reduced but not increased. After cutting the boom arm, readjust the spring balance using the two plastic nuts at the bottom of the spring.
Do not change the wire connection inside while the barrier is powered on.
Connect the GND to the cabinet for protection.

5.2 Tools Preparation

Ensure you have the following tools:

Impact Drill
Adjustable Wrench
Hammer
Needle-nose Pliers
Hexagon Wrench (Allen Key)
Screwdriver, etc.

5.3 Installation of the Base and the Casing

Remove the four screws from the casing and the base.
Ensure the wire slot in the center of the base is pre-opened.
The base has a downward opening. Fix the location using the M10 x 120 expansion screw.
Place the casing onto the base and secure it with the four screws.

Diagram Description: The diagram illustrates the barrier's base with dimensions for mounting hole placement (80mm x 110mm, 110mm x 140mm).

5.4 Boom Arm Installation

5.4.1 Boom Arm Installation Procedure

Install the handlebar head by aligning the flat key on the main shaft with the key notch on the handlebar head. Gently tap the handlebar head into place.
Install and tighten the center screw.
Attach the boom arm to the boom holder's head.
Install and tighten the remaining two screws.
Connect the LED light's power cord.

Diagram Description: The diagram shows how to install the handlebar head, emphasizing aligning the flat key and tapping the head into place. It also shows the correct position for the flat key.

Main Control Board Instructions

Ensure the power supply is turned off before wiring.
Verify that terminals are securely fastened and wiring is secure.

6.1 Control Board External Product Requirement

Power supply: 24V/4 to 10 A
Motor type: 24V DC Brushless motor
Vehicle detector or 12V radar ground sensor

6.2 Main Board Wiring Diagram

Diagram Description: The diagram shows the ZKTECO main control board with labeled terminals for power supply, motor, LEDs, sensors, and communication. It details connections for 24V LED, GND, Alarm, Motor, Light Sense, Receiver, and Detector inputs.

6.3 Main Control Board Operation

6.3.1 Self-inspection Learning Switch Barrier Limit Method

Long press the "key" for 2 seconds. The display value decreases as the barrier closes. It returns to "190" upon reaching the closing limit.
Press and hold the "On" button for 2 seconds after shutdown self-check. The display value increases as the gate opens. A long beep indicates the opening limit is reached.

6.3.2 Operation Steps of the Main Board Buttons

Press and hold the menu button until "L-1" appears.
Use "On" or "Close" keys to select a menu directory, and "Menu" key to enter it.
To modify parameters, use "No" and "Off" keys to increase/decrease values. Press "Menu" to return to the previous menu or save and exit with "Confirm".

6.4 Parameter Settings Description

English Menu	Numerical Menu	Function	Default Parameters	Parameter Range
L-1	L01	Gate opening speed: larger value, the speed is faster	65	20-95
L-2	L02	Gate closing speed: larger value, the speed is faster	65	20-95
L-3	L03	Stability in place: smaller value, it is more stable; if too small, it may not be closed in place	12	8-15
L-5	L05	Velocity and menu: the greater the value, the greater the force.	70	70-90
L-6	L06	Horizontal adjustment: the smaller the value, the smaller the angle of the brake lever	20	3-90
L-7	L07	Aging test mode: 0: manual; 1: automatic, 1-5 is the time interval of automatic operation (1=fastest, 5=slowest), 6=half-stroke operation	0	0-6
L-8	L08	Open gate counting function: 0: without counting, 1: with counting, 4: peak mode	0	0-1-4
L-9	L09	Vertical adjustment: the smaller the value, the smaller the opening angle	20	3-90
L-L	L10	Opening deceleration stroke of the first stage: smaller value, smaller stroke	55	20-90
L-b	L11	The first stage of closing deceleration stroke: smaller value, smaller stroke	55	0-255
L-d	L13	Passive gate movement forward and reverse mode: 0/3: left/right motor direction; 1½: left/right motor direction	0	0-3
L-E	L14	Gate closing direction self-check running speed: larger value, faster speed, used to adjust gate-closing direction self-check speed when the main board is powered on	30	0-49
L-F	L15	Remote pairing and unpairing	0	0-255
L-H	L16	The second deceleration stroke for opening and closing the gate: parameter set within the first deceleration stroke	0	0-20
L-18	L18	Relay output mode: 0=traffic light mode; 1=in-position detection status mode; 3=light sensing mode	0	0-3
L-19	L19	Pressure ground sensing delayed closing time: 000 means function is not enabled	0	0-255
L-20	L20	Automatic gate-off time after opening: 000 means function is not enabled	0	0-255
L-21	L21	Communication machine number setting: normal communication only if machine number matches	70	0-255
L-22	L22	Running reverse buffer setting: sudden reverse buffer time (each number represents 0.1 second)	30	0-59
L-23	L23	Sensitivity setting: smaller value, more sensitive light source	50	0-255
L-24	L24	Operating speed of reverse self-check of gate opening: larger value, faster speed, used to adjust speed of self-checking in the direction of opening the gate when the main board is energized and self-checked	30	0-49

6.5 Remote Control Pairing and Unpairing

6.5.1 Remote Control Pairing

Long press "Menu" to enter the menu, select "L-F", press "Menu" to display "000", then enter remote control setting.
Press any key on the remote control. The main board beeps once, and the display changes to "L-F" upon successful pairing.
Press "Confirm" to save.

6.5.2 Delete Remote Control Pairing

Long press "Menu" to enter the menu, select "L-F", press "Menu" to display "000", then enter remote control setting.
Set the parameter to "253". The main board display returns to the "L-F" interface, indicating successful clearing.

6.6 Reset

Long press the "Confirm" button on the main board until the buzzer beeps three times. Release the button. All parameters will reset to factory defaults.

Troubleshooting

NO	Failure Description	Analysis and Solution
1	Power failure	Manually lift the gate lever gently to open the barrier.
2	Automatic function cannot lift the gate lever	Turn off electricity and slowly lift the boom arm.
3	Self-inspection unsuccessful and barriers not operating normally	Check if L-d motor's left/right rotation modes are compatible. Restart the main board after changing parameters.
4	Barrier rod not in vertical or horizontal position	Adjust parameters using menu L-9 or L-6.
5	Barrier rod not in vertical or horizontal position	Set L-18 parameter to 1. If the relay acts upon opening/closing, it is set correctly. If the motor stops but the barrier is in place, modify L-6 or L-9.
6	Rebound function fails with resistance	Check if L-C parameter allows rebound with resistance (parameter > 100). Rebound function activates after self-check or menu entry/exit when resistance is detected.
7	Barriers unexpectedly reverse orientation during functioning	Increase the value of the L-C rebound function parameter when resistance is encountered.

Safety Precautions

Do not hit the product with hard items.
Handle with care to avoid strong collisions with hard objects.
Do not spill water or corrosive liquids on the product.
Ensure the motor wire is connected correctly for operation.
If smoke or a strange smell occurs, disconnect the power immediately.
For abnormal operation, contact the dealer. Do not attempt self-repair.

Transportation and Storage

Handle with care during loading and unloading.
Store the product in a dry, corrosive-free environment, protected from moisture, rain, sun, and corrosion.

Contact Information

ZKTEco Factory India

Address: B-1, Khata No.31, Devasandra Industrial Estate, Whitefield Main Road, Beside Phoenix Mall, Mahadevapura, Bengaluru, Karnataka.

Phone: 080 6828 1342

Email: india@zkteco.com

For more information on global branches, visit www.zkteco.com.

General Information

The latest operation procedures and relevant documents are available on http://www.zkteco.com.

Models: LB330 Parking Barrier, LB330, Parking Barrier, Barrier

File Info : application/pdf, 21 Pages, 451.91KB

zkteco-lb330

References

Microsoft Word for Microsoft 365

	ZKTeco CMP200 Automatic Barrier Gate User Manual Comprehensive user manual for the ZKTeco CMP200 Automatic Barrier Gate, covering product introduction, installation, technical parameters, functions, wiring, commissioning, and troubleshooting.
	ZKTeco SBT2000S Swing Barrier Turnstile User Manual Comprehensive user manual for the ZKTeco SBT2000S Swing Barrier Turnstile, covering installation, operation, maintenance, and troubleshooting for secure access control solutions.
	ZKTECO Comet Series Speed Gate User Manual This comprehensive user manual provides detailed information on the operation, features, and system components of the ZKTECO Comet Series Speed Gate, including models Comet-S1000 and Comet-S1200. It covers installation, maintenance, troubleshooting, and technical specifications for this advanced pedestrian passage gate.
	ZKTeco SBT2000S Swing Barrier Turnstile User Manual Comprehensive user manual for the ZKTeco SBT2000S Swing Barrier Turnstile, detailing its features, installation, operation, maintenance, and troubleshooting procedures.
	ZKTeco BGM1000 Series Barrier Gate User Manual This user manual provides detailed information on the installation, operation, parameter settings, troubleshooting, and maintenance of the ZKTeco BGM1000 Series Barrier Gate (APP Version). It covers features, specifications, wiring, and safety precautions for effective use.
	SpeedFace-V5L-RFID User Manual - ZKTeco Comprehensive user manual for the ZKTeco SpeedFace-V5L-RFID device, covering installation, operation, system settings, and access control features. Learn how to set up and utilize this advanced biometric security solution.
	ZKTECO InBio Pro Series IP-Based Biometric Access Control Panel Datasheet Detailed specifications and features of the ZKTECO InBio Pro Series IP-Based Biometric Access Control Panels, including InBio-160 Pro, InBio-260 Pro, and InBio-460 Pro models. Learn about biometric identification, communication, capacity, and advanced access control functions.
	ZKTeco SC800 Quick Start Guide: Installation, Setup, and User Management Comprehensive quick start guide for the ZKTeco SC800 access control device. Covers installation, power and network connections (Ethernet, Wiegand, RS485, RS232), user registration methods (on-device, software, mobile), server settings, access control, attendance search, and WebServer login/password recovery.