Introduction
This document provides essential operating instructions and safety information for the PARKSIDE PDM 300 C3 Digital Auto-Range Multimeter. It is designed for private use and offers functions for measuring DC/AC voltages and currents, resistance, diode testing, function generation, and continuity checking.
Key Features and Specifications
- Accurate measurement of voltages, currents, and resistance.
- Includes functions for diode testing and continuity checks.
- Features a function generator for square wave signals.
- Equipped with a 3 1/2 digit LC display with a maximum reading of 1999.
- Auto power-off function to conserve battery life.
- Overvoltage protection up to CAT III 300V.
- Operates within a temperature range of 0°C to +40°C.
Safety Precautions
Users are strongly advised to read and adhere to all safety instructions before operating the multimeter. Key safety points include:
- Never operate the multimeter with the housing open.
- Avoid touching probe contacts or connectors during measurement.
- Do not use in damp or wet environments.
- Be aware of potential explosion risks in environments with explosive gases or dust.
- Never exceed the maximum input values or overvoltage categories.
- Always disconnect the multimeter before changing measurement ranges.
- Handle batteries with care and ensure correct polarity.
Package Contents
The package typically includes:
- PARKSIDE PDM 300 C3 Multimeter
- 2 Measuring probes with cables
- 9V block battery
- 1 Screwdriver
- Operating instructions
Further Information
For detailed technical specifications, measurement procedures, and maintenance guidelines, please refer to the full operating instructions within this document.
For online service and additional information, visit www.lidl-service.com.
