DEWERT OKIN RF58/RF62 Functional Test Guide

Brand: DEWERT OKIN

Model: RF58, RF62

Document Version: 1.0

Date: 2021-9-17

Department: R&D Department

Creator: Gary

Remote Control Layout

The document displays a diagram of the DEWERT OKIN RF58/RF62 remote control. The remote features a central display screen area at the top, which is black in the diagram. Below the screen are several control buttons:

• A "FLAT" button.
• A "M" (Memory) button.
• An "OK" button.
• Navigation buttons: Left arrow (<), Right arrow (>), Up arrow, Down arrow.
• A "MASSAGE" button.
• A numeric keypad with buttons labeled 1 through 12.

The diagram shows two identical remote control units side-by-side.

Button Function Tests

3.2 POSITION Key Test (Key 4)

Clicking this button directs the display screen to the motor control function interface.

3.3 MEMORY Key Test (Key 6)

Pressing this button displays the memory function on the screen.

3.4 MASSAGE Button Test (Button 10)

Pressing this button navigates to the massage function screen.

3.5 UBB Key Test (Key 12)

Clicking this button toggles the underbed light on or off.

3.6 Flat Key Test (Key 2)

Clicking this button accesses the Flat interface, allowing the control box to be positioned flat.

3.7 Back Key Test (Key 1)

Clicking this key performs functions displayed in the lower left corner of the display.

3.8 Enter Key Test (Keys 3 and 8)

Clicking this button executes functions shown in the lower right corner of the display.

3.9 UP Key Test (Key 5)

Clicking this button selects the "up" option on the screen.

3.10 Down Button Test (Button 11)

Clicking this button activates the downward selection function on the interface.

3.11 LEFT Button Test (Button 7)

Clicking this button selects the left side of the interface.

3.12 RIGHT Button Test (Button 9)

Clicking this button selects the right side of the boundary.

Regulatory Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important Note:

ISED Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This radio transmitter (ISED certification number: 25804-RF58) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated without restriction. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated without restriction.

Déclaration d'exposition aux radiations: Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé sans restriction.