OtterBox Folding Wireless Charging Stand

Front Panel

Folding Wireless Charging Stand

Support de Charge Sans Fil Pliable

USE INSTRUCTIONS | UTILISATION

For more product information, visit: otterbox.com/support

Available in multiple languages: German, Italian, Spanish, Portuguese, Japanese, Korean, Traditional Chinese, Simplified Chinese.

Inside - Setup & Wireless Charging

Setup Installation

1. Attach Power Cable to Stand and to Wall Charger. (Reliez le câble d'alimentation au support et au chargeur mural)

Wireless Charging

1. Lift and rotate pad to engage foot, then adjust pad to desired angle. (Levez et tournez la station pour installer le pied, puis ajustez la station à l'angle souhaité)
2. Align device back with gold ring. (Alignez le dos de l'appareil avec le cercle doré)
3. Place device on stand, wireless charging begins automatically. (Placez l'appareil sur le support, la charge sans fil débutera automatiquement)

Back Panel - LED Behavior

LED Behavior

LED flashes briefly during device recognition. (La LED clignote brièvement pendant la reconnaissance de l'appareil)

LED glows solid while charging. (La LED reste allumée lors de la charge)

LED flashes continuously on error; remove foreign object (e.g. metal) or move to cooler environment. (En cas d'erreur, la LED clignote de manière continue. Dans ce cas, enlevez les éventuels corps étrangers (ex: métal) ou déplacez votre chargeur vers un endroit plus frais)

Charge on stand while streaming content. (Recharger l'appareil sur le support tout en visionnant du contenu)

Compliance Information

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

IC RF Exposure Compliance

This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body.

Cet équipement est conforme aux limites d'exposition aux radiations CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 10cm entre le radiateur et votre corps.

Product Details

Project Name: INSTALL INSERT THEON FCC

Part Number: 20-56755

Rev: A

Date: 9.13.2021

Designer: Rowell

Dieline and material shall follow: 23-80870

Colors Coatings and Treatments:

• 100% Process K
• PMS 109 C
• Pantone Cool Gray 7C

Notes:

Confidential property of Otter Products LLC. Reproduction and unauthorized use is prohibited.

Otterproducts LLC: 209 South Meldrum Street, Fort Collins, CO 80521