OtterBox 2-in-1 Power Stand with MagSafe
SKU: 77-89452
RMN: OBFTC-0120-A
United States Compliance
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC RF Exposure Compliance
This certified solution complies with the FCC portable RF exposure limits set forth for an uncontrolled environment and are safe for intended operation as described in the User manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Canada Compliance
ISED Compliance Statement
This Certified Solution contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation of the Certified Solution is subject to the following two conditions: (1) This Certified Solution may not cause interference; and (2) This Certified Solution must accept any interference, including interference that may cause undesired operation of the Certified Solution.
IC RF Exposure Compliance
The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in the user manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Verified Energy Performance
Verified Energy Performance
Performance Énergétique Vérifiée
European Declaration of Conformity
Hereby Otter Products, LLC. declares that this product: 2-in-1 Power Bank with MagSafe (Trademark: OTTERBOX, Type designation(s): OBFTC-0120-A) is in conformity with the relevant Union harmonization legislation: Radio Equipment directive: 2014/53/EU and other Union harmonization legislation where applicable.
Manufacturer Information
Name of manufacturer: Otter Products, LLC.
Address: 209 South Meldrum Street, Fort Collins, CO 80521, United States
Telephone number: 970-980-2092
Product Details
Product description: 2-in-1 Power Bank with MagSafe
Trademark: OTTERBOX
Type designation(s): OBFTC-0120-A
Batch / Serial number: NA
Conformity Statement
This DoC is issued under our sole responsibility and that this product is in conformity with the relevant Union harmonization legislation: Radio Equipment directive: 2014/53/EU and other Union harmonization legislation where applicable.
Applied Standards
- EN 303 417 V1.1.1 (2017-09)
- EN 300 330 V2.1.1 (2017-02)
- EN 55032: 2015+A11: 2020, Class B
- EN 55035: 2017+A11: 2020
- EN 301 489-1 V2.2.3 (2019-11)
- EN 301 489-3 V2.1.1 (2019-03)
- IEC 62368-1:2018
- EN 62311:2008
Notified Body Information
The Notified Body Timoo Engineering, Inc. with Notified Body number 1177 performed: [Modules: B+C]. The issued EU-type examination certificate: E1177-222426. Accessories and components include: Power Bank, USB-C cable and user manual.
UKCA Declaration of Conformity
Otter Products, LLC. of 209 South Meldrum Street, Fort Collins, CO 80521 United States declare under our sole responsibility that the product: 2-in-1 Power Bank with MagSafe (Trademark: OTTERBOX, Type designation(s): OBFTC-0120-A) is in conformity with the following relevant UK legislation, standards and/or other normative documents.
Manufacturer Information
Name of manufacturer: Otter Products, LLC.
Address: 209 South Meldrum Street, Fort Collins, CO 80521, United States
Product Details
Product description: 2-in-1 Power Bank with MagSafe
Trademark: OTTERBOX
Type designation(s): OBFTC-0120-A
Conformity Statement
This declaration relates to conformity with the following relevant UK legislation, standards and/or other normative documents. The product is in conformity with all the essential requirements of the UK Radio Equipment Regulations 2017 SI 2017/1206.
Applied Standards
- EN 303 417 V1.1.1 (2017-09)
- EN 300 330 V2.1.1 (2017-02)
- EN 55032: 2015+A11:2020, Class B
- EN 55035: 2017+A11:2020
- EN 301 489-1 V2.2.3 (2019-11)
- EN 301 489-3 V2.1.1 (2019-03)
- IEC 62368-1:2018
- EN 62311:2008
Approved Body Information
The conformity assessment procedure has been followed with the involvement of the following Approved Body: Timco Engineering, Inc. (Body number: 1177). The issued UK-type examination certificate: U1177-221764. Accessories: Power Bank, USB-C cable and user manual. Software version: C.
Taiwan RoHS Compliance
Equipment Details
Equipment Name: 2 in 1 Power Stand with MagSafe
Type Designation: OBFTC-0120-A
Restricted Substances Table
| Unit | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr+6) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Battery | o | o | o | o | o | o |
| PCBA | o | o | o | o | o | o |
| Plastics | o | o | o | o | o | o |
| Metal | o | o | o | o | o | o |
| Cable | o | o | o | o | o | o |
Notes
- "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
- "o" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
- The "-" indicates that the restricted substance corresponds to the exemption.
WEEE (Waste Electrical and Electronic Equipment)
This symbol on the product and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to a designated collection point where it will be accepted free of charge. Alternatively, in some countries you may be able to return your product to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point.
Important Safety Instructions
- Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, submerge in a liquid, or insert foreign objects into the power bank.
- Keep power banks out of the reach of children. Children should be supervised when a power bank is in use.
- Do not expose power banks to heat or fire.
- Do not store in direct sunlight or in a vehicle.
- Do not use or charge a damaged power bank.
- In the event of a power bank leaking, keep away from skin and eyes. Wash any affected area with large amounts of water and seek medical attention.
- Power banks need to be charged before use. Always use the correct cable and refer to the power bank manufacturer's instructions for proper charging instructions. Do not use any cable other than that specifically provided or recommended by the power bank manufacturer. Do not use a damaged cable to charge or discharge a power bank.
- Do not leave a power bank on prolonged charge when not in use. Disconnect the power bank from the charging source once full.
- Observe the dedicated input and output ports for receiving and providing power on the power bank and the device to be charged to ensure correct use.
- Do not use any power bank which is not designed for use with the device you wish to charge. Refer to the device's manual for proper charging instructions.
- When possible, detach cable(s) from power bank when not in use.
- Only use the power bank in the application for which it was intended.
- Store the power bank in a cool, dry place when not in use.
- When a power bank is not used for prolonged periods, the power bank should be charged periodically to maintain power bank life.
- Dispose of power bank properly.
Keep all instructions provided with the power bank for future reference.
