Otterbox Wireless Charger Car Mount for Vents
Model Numbers: OBFTC-0091-A, 78-80532, 78-80531, 78-80600, 78-80601
Unpacking
This section guides you through unpacking your Otterbox Wireless Charger Car Mount for Vents. Carefully open the packaging to reveal the charger, car mount, and any included accessories.
The package typically includes the wireless charger, a car vent mount attachment, and this quick start guide.
Components
Identify the key parts of your Otterbox Wireless Charger Car Mount:
- 1. USB-C Port: This is the power input port for the charger.
- 2. Charging Pad: The surface where you place your Qi-compatible device to initiate wireless charging.
The device features a sleek design with the Otterbox logo visible on the charging pad.
Charging Your Device
To charge your compatible smartphone:
- Connect the USB-C cable (sold separately or use the one provided with your car charger adapter) to the USB-C port on the car mount.
- Plug the other end of the cable into a compatible car charger adapter (not included).
- Attach the car mount to your vehicle's air vent.
- Place your Qi-enabled smartphone onto the charging pad. Ensure it is centered for optimal charging.
The device will begin charging wirelessly. A visual indicator (e.g., an LED light on the charger, or a charging icon on your phone screen) will confirm charging is in progress.
Specifications
| Feature | Details |
|---|---|
| Input | 5V/3A, 9V/2.22A, 12V/1.67A |
| Output | Wireless 15W (Max) |
| Size | 84.2 x 63.5 x 30.0 mm |
| Weight | 70g |
| Temperature | Operating: 0°C to +35°C Storage: -20°C to +70°C |
Manufacturer:
Company Name: DONGGUAN KETAIHONG ELECTRONICS CO.,LTD
Address: Second Industrial Zone, Shujiu Village, Changping Town, 523569 Dongguan, Guangdong, PEOPLE'S REPUBLIC OF CHINA
For more information, please visit: https://www.otterbox.com
Attention / Warnings
- ?️ Do not expose the product to excessive heat (e.g., from storage in direct sunlight, fire, or the like).
- ?️❌ Do not attempt to disassemble the product. It may cause serious damage.
- ?❌ Do not drop or knock the product onto hard surfaces.
- ?❌ Do not use chemicals or detergents to clean the product.
- ?✔️ Use the original cable or certified cables.
WARNING: Do not hang any type of accessory or accessory bracket from the plug.
Warranty and Compliance
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Industry Canada (ISED) Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.
