Anker SOLIX PS100 Portable Solar Panel

What's in the Box

• Anker SOLIX PS100 Portable Solar Panel
• XT-60 to DC7909 Charging Cable
• Solar to XT-60 Charging Cable
• Extension Cable (3m) (x2)
• Important Information

Using Your Product

1. Unfold the Anker SOLIX PS100 Portable Solar Panel and its stand. For maximum charge, adjust the solar panel to one of the four angles (30°, 40°, 50°, 80°) and align it directly under the sun.

2. Charge your portable power station using the included XT-60 to DC7909 Charging Cable or the Solar to XT-60 Charging Cable. The included 3m extension cables can be used to extend the cable length.

If your portable power station's solar input port is XT60, you can charge it with the included Solar to XT-60 Charging Cable.

If your portable power station's solar input port is DC7909, you can charge it with the included Solar to XT-60 Charging Cable and XT-60 to DC7909 Charging Cable.

Notes

• The Anker SOLIX PS100 Portable Solar Panel cannot store electricity. A portable power station is required to store power.
• Charging efficiency is subject to sunlight intensity.
• Keep your portable power station away from direct sunlight. Excessive heat may cause damage.
• The '100W' rating refers to the peak power of the solar panel, not the actual power output of the ports. Some power loss occurs during the transfer of solar energy to electrical energy, resulting in the actual output power being less than the panel's rated power.

Specifications