Anker SOLIX PS100X Portable Solar Panel
What's in the Box
The package includes:
- Anker SOLIX PS100X Foldable Solar Panel
- XT-60 to DC7909 Charging Cable
- Solar to XT-60 Charging Cable
- Extension Cable (3 m)
- Documents
Product Usage
1. Unfold the Anker SOLIX PS100X portable solar panel and its support.
Diagram showing the unfolding process with numbered steps 1, 2, and 3.
2. Charge your portable power station using the XT-60 to DC7909 charging cable or the included Solar to XT-60 charging cable.
Option 1: If your portable power station's solar input port is XT-60, you can charge it with the included Solar to XT-60 charging cable. To extend the cable length, use the included 3m extension cable.
Diagram illustrating the connection of the solar panel to a portable power station using the XT-60 to DC7909 cable and an extension cable.
Option 2: If your portable power station's solar input port is DC7909, you can charge it with the included XT-60 to DC7909 charging cable.
Diagram illustrating the connection of the solar panel to a portable power station using the XT-60 to DC7909 cable.
Notes
- The Anker SOLIX PS100X portable solar panel cannot store electricity. You will need a portable power station to store energy.
- Charging efficiency depends on the intensity of sunlight.
- Do not expose the portable power station to direct sunlight. Excessive heat can cause damage.
- 100W refers to the solar panel's power output, which is not equal to the actual power of the output ports. There will be power loss when solar energy is converted into electrical energy, so the actual output port power will be lower than the panel's power.
Specifications
| Specification | Value |
|---|---|
| Maximum Power | 100 W |
| Rated Voltage | 16.8 V |
| Rated Current | 5.95 A |
| Dimensions (folded) | 13.98 × 10.91 × 2.56 in / 35.5 × 27.7 × 6.5 cm |
| Dimensions (unfolded) | 46.46 × 27.96 × 0.91 in / 118.0 x 71.0 x 2.3 cm |
| Net Weight | 3.5 kg / 7.7 lb |
