FOXX AS65U Smart Phone
Thank you for choosing FOXXD product. Please follow the instructions when starting to use this product.
Product Safety Information
- ⚠️ Do not use while re-charging.
- ⚠️ Do not use hand-held while driving.
- ⚠️ This device may produce a bright or flash light.
- ⚠️ For body-worn operation, maintain aspiration of 5 mm.
- ⚠️ Do not dispose of the phone in a fire.
- ⚠️ Small parts may cause a choking hazard.
- ⚠️ Avoid contact with magnetic media.
- ⚠️ This device may produce a loud sound.
- ⚠️ To prevent possible hearing damage, do not listen at high volume levels for long periods.
- ⚠️ Avoid extreme temperatures.
- ⚠️ Keep away from pacemakers and other personal medical devices.
- ⚠️ Avoid any contact with liquid. Keep it dry.
- ⚠️ Switch off when instructed in hospitals and medical facilities.
- ⚠️ Do not attempt to disassemble your phone.
- ⚠️ Switch off when instructed in aircrafts and airports.
- ⚠️ Do not rely on this device for emergency communications.
- ⚠️ Switch off in explosive environments.
- ⚠️ Only use approved accessories.
What are in the Box
The phone packaging box should contain the following items and accessories:
- Phone
- Charger
- USB Type-C cable
- Protective film (applied)
- SIM card tool
- Quick Start Guide
Notices for the Use of Your Phone
Your phone should be treated with care. The following suggestions can help you extend the life of your mobile phone.
- Place the mobile phone and its parts and components out of reach of young children.
- Keep the phone dry. Rain, humidity and all types of liquids which contain minerals will corrode electronic circuits.
- Don't touch the phone with wet hands when charging; it will cause an electric shock or damage the phone.
- Avoid placing the device in high temperature environments. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
- Avoid placing the device in a low temperature environment. When the temperature rises, the phone will produce water vapor that may damage electronic circuits.
- Avoid placing the phone in dusty, dirty places, otherwise parts may be damaged.
- Avoid placing the phone near a lit cigarette, open flame or any heat source.
- Do not drop, knock or shake the phone. Rough handling can damage internal circuit boards.
- Do not paint the phone. The paint may block headphones, microphones or other removable parts, and cause them not to work.
- Use a clean, soft, dry cloth to clean the camera, light sensor lenses. Prohibit the use of harmful chemicals and cleaning agents to clean the phone.
- Pacemaker manufacturers recommend that a minimum separation of 5mm be maintained between a mobile phone and a pacemaker to avoid a potential interference with the pacemaker (when the device is used in the USA, the separation distance can be maintained at 10mm between user's body and handset). To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket.
- Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device.
- Turn off your mobile phone or wireless devices when in a blasting area or in areas posted turn off "two-way radios" or "electronic devices" to avoid interfering with blasting operations.
- There is a risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to the instructions.
Getting to Know Your Phone
A line drawing illustrates the FOXX AS65U smartphone. The front view shows the Earpiece at the top, the large Touch Screen dominating the display area, and the Headset Jack and Charging USB Port at the bottom. The rear view shows the Camera module and Camera Flash at the top. Side views indicate the location of the Volume Keys and the Power Key.
Key Functions:
- Power Key: Press and hold to Power on/off, or Restart the phone. Press to wake up or turn off the display.
- Home Key: Touch to return to the home screen. Touch and hold to open the Google Assistant for Android™.
- Menu Key: Touch to see recently used applications.
- Back key: Touch to go back to the previous screen.
- Volume Keys: Press or hold to turn the volume up or down.
Before Getting Started: Installing SIM Cards
Insert a SIM tool into the small hole to eject the SIM tray.
Illustrations guide the user through installing SIM cards. The first image shows a SIM tool being inserted into a small hole on the side of the phone to eject the SIM tray. The second image displays the SIM tray with two slots labeled SIM2 and SIM1, and an arrow indicating the direction of insertion. The third image shows how to place one or two nano-SIM cards onto the tray, ensuring the gold contacts face down and the notched edges align with the tray's positions.
