Fender American Deluxe Strat Ash Guitar Parts List and Wiring Diagram
Parts Layout
The document provides a parts layout diagram for the Fender American Deluxe Strat Ash guitar. The diagram shows the front and back views of the instrument, with various components identified by numerical callouts. Key areas illustrated include:
- Front View: Headstock (numbered 1, 2, 3), tuning machines, neck, body, pickguard, pickups (numbered 9, 10, 11), bridge assembly (numbered 13), tremolo system, volume and tone controls (numbered 16, 17, 18), and switches.
- Back View: Neck plate (numbered 5), string guides (numbered 3), and the control cavity cover (numbered 24).
A detailed list of these parts and their corresponding numbers is provided in the subsequent sections.
Parts List
The following tables detail the components of the Fender American Deluxe Strat Ash guitar, including part numbers and descriptions.
Page 1 Parts (from layout diagram)
| Ref# | Description |
|---|---|
| 1 | NECK AM DLX STRAT MPL UPGRD |
| 1 | NECK AM DLX STRAT RW UPGRD |
| 2 | FENDER LOCKING TUNERS,CHROME |
| 2a | WASHER KEY PING (6) |
| 2b | BUSHING KEYS PING |
| 3 | AM SRS STRING GUIDES |
| 3 | SCRW SMAB 3x3/8 RHP ZA CHR (12) |
| 4 | BODY DLX STRAT UP ASH W.TRANS |
| 4 | BODY DLX STR ASH TBS |
| 4 | BODY DLX STRAT UP ASH ACB |
| 5 | PLATE NECK DLX STRAT RH CHR KAN BAN |
| 5a | SCREW SM 8 X 1-3/4 OH CHR (12) |
| 5b | SCREW ST 1/4-20x3/8 OP NI HEX |
| 6 | AM SRS STRAP BUTTONS |
| 6a | SCREW SM 5 X 1 OH CHROME (12) |
| 6b | BLACK FELT WASHERS |
| 6c | WHITE FELT WASHERS |
| 7 | PG, STRAT MINT GREEN 11-HOLE |
| 7 | PG, STRAT B/W/B 11-HOLE, 3-PLY |
| 8 | PICKGUARD SCREWS |
| 9 | PICKUP ASSY, STRAT NK ALN325 AG-WHT |
| 9 | PICKUP ASSY, STRAT NK ALN325 BLK |
| 10 | PICKUP ASSY, STRAT MID ALN325 AG-WHT |
| 10 | PICKUP ASSY, STRAT MID ALN325 BLK |
| 11 | PICKUP ASSY, STRAT BRG ALN325 AG-WHT |
| 11 | PICKUP ASSY, STRAT BRG ALN325 BLK |
| 12 | SCRW SPCL M 4-40x13/16 M5RHP NI (12) |
| 13 | BRIDGE ASSY STRAT AM DLX RH |
| 13a | SCREW MACHINE-BRIDGE PIVOT (2) |
| 13b | INSERT SCREW MACH,BRIDGE PIVOT (2) |
| 13c | SCREW 4-40x5/8 PHP BLK (12) |
| 13d | SPRING BRIDGE 4 COIL 3/8 BLACK (12) |
| 13e | SPRING-BRIDGE 3 COIL 1/4 BLACK (12) |
| 13f | SCREW PLATE MTG. (12) |
| 13g | SCRW HEIGHT ADJ. 1/4 (12) |
| 13h | SCREW HEIGHT ADJ.5/16" BLK (12) |
| 13i | BRIDGE PLATE ULTRA STRAT KAN BAN |
| 13k | BRIDGE SECTION-ULTRA STRAT |
| 13l | BLOCK, TREMOLO AM DLX STRAT RH SLVR MET |
| 13m | SPRING CLIP, ULTRA |
Page 2 Parts (continued)
| Ref# | Description | Part Number |
|---|---|---|
| 13n | BUSHING NYL BLK 31OD 22ID x .87L | 0036614000 |
| 13p | SCREW SET 10-32X3/16 LOCKING (12) | 0036615049 |
| 13r | TREM ARM ULTRA SNAPIN ULTRADLX | 0036534000 |
| 13s | CLAW SPRING TENSION - NI KAN BAN | 0010272100 |
| 13t | SCREW SM OV HD 8 X 1-3/4 (12) | 0015636049 |
| 14 | SPRING TREM TENSION BLK OX (6) | 0018671049 |
| 14 | SWITCH 5-WAY LEVER DISCRETE/COM | 0078776000 |
| 14a | ORIGINAL STRAT AGED SWITCH TIP | 0994938000 |
| 14a | ORIG. STRAT BLACK SWITCH TIPS | 0994939000 |
| 14b | PICKUP/SWITCH SCREWS | 0994925000 |
| 15 | CAP CD .01uF 600V 10% 1/2"DIA (6) | 0054504049 |
| 16 | SW/POT ASSY S-1 250K 25B SPSH BI TECH | 0078777000 |
| 17 | CNTRL 250K 10% TAPER SPSH BI TECH | 0078779000 |
| 18 | CNTRL 250K 10% TAPER NO-LOAD SPSH B-TECH | 0078780000 |
| 18a | CAP MPF RDL .022uf 250v 10% (12) | 0024832049 |
| 19 | WASHER, INTLOCK 3/8 NI (12) | 0016436049 |
| 19a | NUT HEX 3/8-32 X 1/2 NICKEL (12) | 0016352049 |
| 20 | AGED STRAT KNOBS | 0991369000 |
| 20a | KNOB STRAT TONE BLACK PIMCO | 0056146000 |
| 21 | SW KNOB SPSH STRAT AGED WHT | 0059267030 |
| 21 | SW KNOB SPSH STRAT BLK | 0059267020 |
| 21a | SW CAP SPSH STRAT AGED WHT | 0059266030 |
| 21a | SW CAP SPSH STRAT BLK (2) | 0059266029 |
| 22 | JACK FERRULE, STRAT, CHROME | 0991940100 |
| 23 | JACK, PHONE OPEN W/HDWR | 0021956049 |
| 24 | PLATE BACK AS STRAT MG/B/MG | 0054029000 |
| 24 | BACKPLATE, STRAT B/W/B/ 3-PLY | 0991322000 |
| 24 | PLATE BACK AS STRAT SHELL | 0049683000 |
| 25 | STRAP LEATHER DLX SRS STR/TELE* | 0054138000 |
| 26 | KIT,AM DLX STRAT UPGRADE* | 0064285001 |
| 26a | WRENCH .050 HEX KEY SHORT ARM (12)* | 0018531049 |
| 26b | WRENCH 3/32 HEX KEY SHORT ARM* | 0018622000 |
| 26c | WRENCH 1/8 X 1-1/4 X 2-3/4 HEX (12)* | 0023811049 |
| 26d | CABLE OUTPUT GUITAR BLK 10 FT* | 0027174000 |
| 26e | SEC.STRP LOCKS & BUTNS* | 0990690000 |
| 26f | MANUAL, OWNERS, GTR AND BASS* | 0037723000 |
| 27 | CASE, MOLDED STRAT/TELE SKB* | 0996101506 |
Wiring Assembly
The wiring assembly diagram illustrates the internal electrical connections of the Fender American Deluxe Strat Ash guitar. It details the routing and connection of wires from the pickups to the control circuitry and output jack.
- Grounding: A ground wire is shown connecting to the tremolo claw, and a ground lug wire is also present.
- Shielding: The diagram indicates shielding is applied to the control cavity.
- Pickups: Connections are shown for the Neck Pickup, Middle Pickup, and Bridge Pickup.
- Controls: The assembly includes a 5-way switch, an S1 switch, a volume control, Tone 1 control, and Tone 2 control.
- Capacitors: A 0.01 µF capacitor is associated with the S1 switch volume control, and a 0.022 µF capacitor is part of the Tone 2 control.
- Connections: Wires are routed from pickups to the 5-way switch and then to the volume and tone controls. A black & white wire connects from the output jack to the circuit.
Switch and Control Functions
This section explains the operation of the guitar's controls, including the 5-way pickup selector switch and the S1 switch, along with the master volume and tone controls.
5-Way Switch and S1 Switch Operation
The guitar features a 5-way selector switch to choose between different pickup combinations and an S1 switch integrated into the volume knob for additional tonal options.
S1 Switch UP (OFF)
When the S1 switch is in the UP (OFF) position, the 5-way switch operates in its standard configuration:
- Position 1: Neck (A) Pickup only.
- Position 2: Neck (A) Pickup and Middle (B) Pickup in parallel.
- Position 3: Middle (B) Pickup only.
- Position 4: Middle (B) Pickup and Bridge (C) Pickup in parallel.
- Position 5: Bridge (C) Pickup only.
In this mode, the Tone 1 and Tone 2 controls function as standard tone shaping for different pickup selections.
S1 Switch DOWN (ON)
When the S1 switch is in the DOWN (ON) position, it engages different wiring schemes for the pickups:
- Position 1: Neck (A) Pickup only.
- Position 2: Neck (A) Pickup and Middle (B) Pickup in series.
- Position 3: Neck (A) Pickup, Middle (B) Pickup, and Bridge (C) Pickup in series.
- Position 4: Middle (B) Pickup and Bridge (C) Pickup in series.
- Position 5: Bridge (C) Pickup only.
Additionally, the S1 switch in the DOWN position enables special configurations:
- Position 2 (S1 Down): Neck PU Out of Phase & Parallel with Middle PU.
- Position 3 (S1 Down): Neck PU, Middle PU & Bridge PU Out of Phase.
- Position 4 (S1 Down): Middle PU & Bridge PU Out of Phase.
The Tone 1 and Tone 2 controls may have altered functions or be bypassed in certain S1 switch positions, with the S1 switch itself potentially acting as a tone control in some modes.
Master Volume and Tone Controls
The Master Volume knob controls the overall output level of the guitar. The Tone 1 and Tone 2 knobs provide adjustable treble cut for different pickup combinations, as indicated by the diagrams and control function descriptions.
