Fender Kurt Cobain Jaguar NOS (0143001700)

Parts Layout

This section provides a visual representation of the Fender Kurt Cobain Jaguar NOS guitar, detailing the placement of various components. The diagram shows both the front and back views of the guitar, with numbered callouts pointing to specific parts.

Key Components Indicated by Number:

• 1: BODY KURT COBAIN JAGUAR 3TSB
• 2: NECK KURT COBAIN JAGUAR
• 3: KEY GOTOH LOCK CHROME
• 4: SCREW SMAB 2x1/2 FHP BLX
• 5: STRING GUIDE NCKL
• 6: SPACER STRING TREE 62 STRAT
• 7: SCREW SMA 3 X 5/8 RHP NI
• 8: NECK PLATE KURT COBAIN
• 9: SCREW SMA 8 X 1-3/4 OHP NKL
• 10: PICKGUARD KURT COBAIN JAGUAR
• 11: SCREW SMA 4X1/2 OHP NI
• 12: SWITCH PLATE COBAIN JAG
• 13: COBAIN JAGUAR SWITCH PLATE INSULATOR
• 14: SCREW M 4-40x1/4 OHP NI RELIC
• 15: SWITCH TOGGLE AGED WHITE KNOB CHROME RING
• 16: NUT HEX 4-40 EX LOCK
• 17: CONTROL PLATE COBAIN JAG
• 18: KNOB CONTROL VINTAGE TELE
• 19: CONTROL 1 MEG 10%
• 20: SCREW SET 8-32X3/16 SL CUP NI
• 21: NUT HEX 3/8-32x3/32 TK NI RDWRN
• 22: WASHER LOCK INTL 3/8 X .687 sel 049
• 23: CAP CD .01μF 600V 10% 1/2" DIAM
• 24: WASHER FLAT 3/8x.614 NI
• 25: JACK PHONE OPEN CIRCT 11
• 26: TREM ASSY, JAG CHRM TAESUNG, W/ARM
• 27: SCREW SMAB 5X1 OHP NI
• 28: BRIDGE T-O-M GOTOH BLACK
• 29: DIMARZIO PICKUP DP100FCRU
• 30: PICKUP MOUNTING RING BLACK
• 31: SCREW SMAB 3X3/8 RHP NCKL
• 32: DIMARZIO PICKUP DP103FCRU
• 33: PLATE PRESET CONTROL JAGUAR
• 34: SWITCH SLIDE SS 50 DP DT
• 35: SCREW M 4-40 X 1/4 OHP NI
• 36: KNOB DISC PRESET CONTROL 1" X .25
• 37: CONTROL MINIPOT 1 MEG LINEAR W/NUT
• 38: WASHER LOCK INTERNAL TOOTH 1/4
• 39: CONTROL MINIPOT 50K LINEAR W/NUT
• 40: BRACKET CONTROL MTG 62 JAGUAR
• 41: BUTTON STRAP
• 42: SCREW WOOD 6 X 1 OHP NI
• ARM VIB JAG/JAZZMASTER (Not pictured in diagram)
• CASE COBAIN GUITAR (Not pictured in diagram)

Parts List

Note: Items marked with an asterisk (*) are not pictured in the diagram.

Wiring Assembly

This section illustrates the wiring schematic for the Kurt Cobain Jaguar NOS. It details the connections between the pickups, switches, potentiometers, and other electronic components.

Key Wiring Connections:

• The diagram shows the Neck Pickup and Bridge Pickup, both identified as Dimarzio Pickups Made in USA.
• A 3-Way Toggle Switch is depicted, along with a Slide Switch.
• Connections are made to Volume 1, Volume 2, and Volume 3 potentiometers, and Tone 1 and Tone 2 potentiometers.
• Capacitors (CAP .01μF) are shown connected to the tone circuits.
• There is a "GND LUG TO CONTROL CAVITY" connection.
• A "BLACK WIRE TO BRIDGE" is indicated.
• Various connections are described as "SOLDERED & SHRINK TUBED".
• The "OUTPUT ASSY" is also shown.

Switch and Control Function

This section outlines the functionality of the guitar's switches and controls, detailing how they affect the sound output.

3-Way Switch Positions:

The 3-way toggle switch allows selection between the Neck Pickup, Bridge Pickup, or a combination. Specific positions are indicated with corresponding control assignments (e.g., V3/T2/T1, V2/T1, V1/V2/T1, V1/T1).

Slide Switch Function:

The slide switch has two positions: UP (U) and DOWN (D). Its specific function is not detailed in this excerpt but is typically used for pickup selection or tonal variations.

Control Assignments:

• Volume 3 (V3)
• Tone 2 (T2)
• Neck Pickup selector
• Volume 2 (V2)
• Volume 1 (V1)
• Tone 1 (T1)
• Bridge Pickup selector

The diagram also indicates "PICKUP OFF" and "PICKUP ON" states, likely controlled by the slide switch or a separate kill switch function.