JYX-66BT User Manual

Catalogue

• Introduction
• Product Functions
• Remote Control
• Technical Indicators
• Packing List
• FAQ

Dear Users

Thank you for your purchase. Please read the directions carefully before using and follow the correct instructions.

Matters Needing Attention

To ensure safety, please read carefully and follow the following safety instructions:

1. The equipment is up to The China Compulsory Certification.
2. The equipment should be used in a dry environment.
3. Do not place a fire source near the equipment.
4. Do not use near water source to avoid corrosion of products and accessories.
5. Do not open or disassemble or repair the battery module by yourself. There will be a risk of explosion if the battery is not replaced properly. Do not put the battery into water, fire or any overheated environment.
6. When taking an airplane, please follow the relevant regulations and regulations of the airline company to turn off this product before the airplane takes off to avoid any hidden danger.
7. The charging cable cannot be squeezed, pulled, bent, knotted, or suspended from heavy objects in order to avoid damage to the insulation layer of it and cause electric shock.

Guide to Control and Setting

The following describes the controls and settings of the JYX-66BT speaker:

Controls:

• 1. Master: Main volume control knob.
• 2. Number Key: Press to switch to the program with the corresponding serial number.
• 3. Previous: Short press to switch to the last program; long press to fast backward.
• 4. Reverb: Adjust reverb.
• 5. Play/Pause: Short press to play/pause; In radio mode, long press for automatic radio station search; In Bluetooth mode, long press for TWS (only valid for the same model).
• 6. Next: Short press to switch to the next program; long press to fast forward.
• 7. Bass: Adjust bass sound.
• 8. REC: Long press to record audio, during this process, short press to stop recording. When there is a recording file in the storage device, short press is to play the recording file. (The recording function is only available when a storage device is plugged in).
• 9. Mode: Short press to switch between Bluetooth, flash card, TF card and FM radio. When Bluetooth has already connected, long press to disconnect.
• 10. Treble: Adjust treble sound.
• 11. MIC VOL: Adjust microphone volume.
• 12. MIC Priority: When use microphone while playing audio, press this button to reduce the sound of the background audio.
• 13. Dynamic Microphone jack (6.35mm)
• 14. Condenser Microphone jack (3.55mm)
• 15. AUX IN Jack
• 16. TF Card Port
• 17. USB Port
• 18. Charging Indicator Light
• 19. 5V Charging Port
• 20. Power
• 21. Sound Receiver Hole

Remote Control

The remote control for the JYX-66BT speaker has the following functions:

• 1. MODE: Switches between USB, TF card, Radio, AUX IN, and Bluetooth modes.
• 2. Number Keys (0-9): Press to play the program with the corresponding serial number.
• 3. BT: Switches to Bluetooth mode.
• 4. VOL+: Increases volume.
• 5. VOL-: Decreases volume.
• 6. REC: Starts recording (long press) or stops recording (short press).
• 7. PLAY/PAUSE: Plays or pauses audio. In USB/TF card mode, a long press repeats the current track. In FM radio mode, a short press silences the audio, and a long press searches for radio stations.
• 8. REPEAT: Selects single loop or list loop.
• 9. PREV: Switches to the previous track or station.
• 10. NEXT: Switches to the next track or station.
• 11. SILENT: Turns silent mode ON/OFF.
• 12. REC PLAY: Plays the recorded file.

Bluetooth Connection

1. Turn on Bluetooth on your mobile device.
2. Press the "Mode" key and switch the speaker to BT mode.
3. Select "JYX-66BT" from the available devices. (If JYX-66BT is unavailable, please switch back to Bluetooth mode and try again).

AUX-IN

Transmit audio without Bluetooth by plugging a 3.5mm audio cable into the AUX IN jack. The speaker will play the audio from the input device automatically.

USB and TF Input

When a USB or TF card is inserted into the speaker, the speaker will play the audio from the USB/TF card automatically.

FM Radio

1. Pull out the antenna on the top of the speaker.
2. Press the "Mode" key to switch to radio station mode.
3. Long press the "Play/Pause" key to search and save available stations automatically.
4. Station searching is complete when it no longer switches automatically.
5. Press "Next" or "Previous" to select your desired station.

REC (Recording)

1. Plug in a TF card or flash card.
2. Long press "REC" to start recording; short press to end recording.
3. Short press "REC" again to play the recorded audio.

TWS Function

To use this feature, two JYX-66BT systems are required.

1. Turn on both JYX-66BT speakers and set them to Bluetooth mode. The screens on both machines will flash "BLUE".
2. Long press the “PLAY/PAUSE" button on either of the two machines. The other machine will make a prompt tone and stop flashing. The TWS function will be activated.
3. Connect your device to the speaker and play music.
4. Long press “PLAY/PAUSE" button again to deactivate TWS function.

If you require further assistance, please contact the customer service team for a video tutorial at service-us@szjyx.com.cn.

Product Parameters

• Model: JYX-65BT
• Speaker size: 6.5 inch bass + 2 inch treble
• RMS: 15W
• Input voltage: 5V

Package Includes

• Speaker system: 1PC
• Charging cable: 1PC
• User manual: 1PC
• Remote control: 1PC
• 3.55mm audio cable: 1PC
• Adjustable shoulder strap: 1PC

FAQ

Q: The system can not start up.

A: Charge the built-in battery; Check if the adapter is connected securely.

Q: The system provides no sound.

A: Check if the system is powered on. Adjust the volume.

Q: The Bluetooth connection is not available.

A: Move your device closer to the system. Check to see if Bluetooth is engaged.

Q: Unable to connect two systems with TWS feature.

A: Make sure the two systems are within one meter of each other.

Q: Reset the system.

A: If the system does not respond to any operations, long press the "Power" key for 8 seconds to reset the system. (Notes: If necessary, contact the after-sales team).

Contact Information

SHENZHEN CITY JIAYUXIANG ACOUSTICS ELECTRONIC CO., LTD.

JIA YU XIANG (HK) INTERNATIONAL ELECTRONICS CO., LIMITED

Factor address: NO.7th Building, Houhaixufa Industrial Zone, Loucun, Gongming town, Guangming District, Shenzhen, China

TEL: +(86)-0755-23410725 FAX: +(86)-0755-27508507

Website: www.szjyx.com.cn

E-mail: service-us@szjyx.com.cn

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.