JYX-60BT User Manual

Introduction

Dear users: Thanks for your purchasing. Please read the directions carefully before using and follow the correct instructions.

Matters Needing Attention

To ensure safety, please read carefully and follow the following safety instructions:

1. The equipment is up to The China Compulsory Certification.
2. The equipment should be used in a dry environment.
3. Do not place a fire source near the equipment.
4. Do not use near water source to avoid corrosion of products and accessories.
5. Do not open or disassemble or repair the battery module by yourself. There will be a risk of explosion if the battery is not replaced properly. Do not put the battery into water, fire or any overheated environment.
6. When taking an airplane, please follow the relevant regulations and regulations of the airline company to turn off this product before the airplane takes off to avoid any hidden danger.
7. The charging cable cannot be squeezed, pulled, bent, knotted, or suspended from heavy objects in order to avoid damage to the insulation layer of it and cause electric shock.

Controls and Ports

Top Panel Controls

• 1. POWER: Press to start/stop, long press for 8 seconds to force reset.
• 2. PREV: Short press to switch to the last program; long press to fast backward.
• 3. NEXT: Short press to switch to the next program; long press to fast forward.
• 4. PLAY/PAUSE: Short press to play/pause; in radio mode, long press for automatic radio station search; In Bluetooth mode, long press for True Wireless Stereo (TWS).
• 5. REC: Long press to record audio, short press to stop recording or play the recording file. (Recording function requires a storage device).
• 6. MODE: Short press to switch between Bluetooth, Flash Card, TF Card, and FM radio. Long press to disconnect Bluetooth.
• 7. MIC.VOL: Adjust microphone volume.
• 8. ECHO: Adjust echo effect.
• 9. MASTER: Adjust master volume.

Back Panel Ports

• 10. MIC: Dynamic microphone jack (6.35mm).
• 11. AUX IN: Auxiliary audio input.
• 12. TF Card port: For TF/MicroSD cards.
• 13. USB port: For USB drives.
• 14. 5V charging port: For charging the device.
• Charging Indicator (15, 16, 17): Light is red when charging and blue when fully charged.

Operation Guide

Bluetooth Connection

1. Turn on Bluetooth on your mobile device.
2. Press the "MODE" button and switch the speaker to BT mode.
3. Select "JYX-60BT" from the list of available devices. (If JYX-60BT is unavailable, please switch back to Bluetooth mode and try again).

AUX-IN

Plug the 3.5mm audio cable into the AUX IN jack. The speaker will play the audio from the connected input device automatically.

USB and TF Input

When a USB or TF card is inserted into the speaker, it will play the audio from the USB/TF card automatically.

FM Radio

1. Pull out the antenna on the top of the speaker.
2. Press the "MODE" button to switch to radio station mode.
3. Long press the "PLAY/PAUSE" button to search and save available stations automatically.
4. Station searching is complete when it stops switching automatically.
5. Press "NEXT" or "PREV" to select your desired station.

REC (Recording)

1. Plug in a TF card or flash card.
2. Long press "REC" to start recording. Short press "REC" to end recording.
3. Short press "REC" to play the recorded audio.

TWS Function (True Wireless Stereo)

To use this feature, two JYX-60BT systems are required.

1. Turn on two JYX-60BT units and switch both to Bluetooth mode. The screens will flash "BLUE".
2. Long press the "PLAY/PAUSE" button on either of the two machines. The other machine will emit a prompt tone and stop flashing. The TWS function will be activated.
3. Connect your device to one of the speakers via Bluetooth and play music.
4. Long press the "PLAY/PAUSE" button again to deactivate the TWS function.

If you require further assistance, please contact the customer service team for a video tutorial at service-us@szjyx.com.cn.

Product Parameters

Package Includes

• Speaker system: 1PC
• Charging cable: 1PC
• User manual: 1PC
• Adjustable shoulder strap: 1PC

Frequently Asked Questions (FAQ)

Q: The system can not start up.

A: Charge the built-in battery; Check if the adapter is connected securely.

Q: The system provides no sound.

A: Check if the system is powered on. Adjust the volume.

Q: The Bluetooth connection is not available.

A: Move your device closer to the system. Check to see if Bluetooth is engaged.

Q: Unable to connect two systems with TWS feature.

A: Make sure the two systems are within one meter of each other.

Q: Reset the system.

A: If the system does not respond to any operations, long press the "Power" button for 8 seconds to reset the system. (Notes: If necessary, contact the after-sales team).

Contact Information

SHENZHEN CITY JIAYUXIANG ACOUSTICS ELECTRONIC CO., LTD.

JIA YU XIANG (HK) INTERNATIONAL ELECTRONICS CO., LIMITED

Factory Address: NO. 7th Building, Houhaixufa Industrial Zone, Loucun, Gongming town, Guangming District, Shenzhen, China

TEL: + (86)-0755-23410725

FAX: + (86)-0755-27508507

Website: www.szjyx.com.cn

E-mail: service-us@szjyx.com.cn

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The devices have been evaluated to meet general RF exposure requirement; the device can be used in portable exposure condition without restriction.