JYX USER MANUAL

Graphical Function Keys

The speaker features the following function keys:

• 1. POWER: Power button.
• 2. MASTER: Adjusts master volume.
• 3. PREV: Switches to the previous track or fast backward (◀️).
• 4. NEXT: Switches to the next track or fast forward (▶️).
• 5. PLAY/PAUSE: Plays or pauses audio (▶️/⏸️). In radio mode, long press for automatic station search. In Bluetooth mode, long press for True Wireless Stereo (TWS ?).
• 6. REC: Long press to record audio (?); short press to stop recording or play recorded file. Requires a storage device.
• 7. MIC EFFECTS: Selects special effects for the microphone (?✨).
• 8. Recording Hole: Location for recording function.
• 9. MODE: Switches between Bluetooth, Flash Card, TF Card, and FM Radio (⚙️). Long press to disconnect Bluetooth.
• 10. MIC VOL: Adjusts microphone volume.
• 11. REVERB: Adjusts sound reverberation.
• 12. Radio Antenna: For FM radio reception.
• 13. 9V Charging Port: For charging the device.
• 14. USB Port: For USB storage devices (?).
• 15. TF Card Jack: For TF (microSD) cards (?).
• 16. AUX IN: For wired audio input (?).
• 17. 3.55mm Microphone Jack: For connecting a microphone (?).
• 18. 6.35mm Microphone Jack: For connecting a microphone (?).
• 19. Dust-proof Cover: Protects ports.

TWS Function

To use the TWS (True Wireless Stereo) feature, two JYX-82BT systems are required:

1. Turn on both JYX-82BT speakers and set them to Bluetooth mode. The indicator light on both machines will flash "BLUE".
2. Long press the "PLAY/PAUSE" button on either speaker. The other speaker will emit a prompt tone and stop flashing, indicating TWS activation.
3. Connect your device via Bluetooth to the paired speakers and play music.
4. To deactivate TWS, long press the "PLAY/PAUSE" button again on either speaker.

For video tutorials, contact customer service at service-us@szjyx.com.cn.

Remote Control Functions

The included remote control allows for comprehensive operation:

Graphical Remote Layout

The remote has numbered buttons for various functions:

• 1. REC: Record audio (requires USB/TF card) (?).
• 2. Original: Original voice mode for microphones.
• 3. Singer: Singer voice mode for microphones.
• 4. Male: Male voice mode for microphones.
• 5. Monster: Monster voice mode for microphones.
• 6. Single Cycle: Single track repeat.
• 7. Previous: Go to the previous track (◀️).
• 8. DEL: Delete original voice (for stereophonic source).
• 9. F.F: Fast Forward (⏩).
• 10. Silent: Mute the audio (?).
• 11. Meeting: Meeting mode for microphones.
• 12. Peddlery: Peddlery mode for microphones.
• 13. Female: Female voice mode for microphones.
• 14. Baby-voice: Baby voice mode for microphones.
• 15. List Cycle: Cycle through list.
• 16. Volume+: Increase master volume (➕).
• 17. Next: Go to the next track (▶️).
• 18. Play/Pause: Play or pause audio (▶️/⏸️).
• 19. Volume-: Decrease master volume (➖).
• 20. MODE: Switch between input modes (Bluetooth, USB, TF, FM) (⚙️).
• 21. Number Key: Select tracks or stations by number.
• 22. F.R: Fast Rewind (⏪).

UHF Wireless Microphone Instructions

Microphone Operation

The wireless microphone has the following features:

• Battery power display: Shows remaining battery.
• Power switch: Long press to turn on/off.
• Volume +/-: Adjusts microphone volume.
• Pickups: Captures sound.
• Microphone silent function: Light on means off, light off means on.
• LED display screen: Shows frequency and status.
• Frequency indicator: Displays current frequency.
• Battery case: Houses the batteries.

Adjusting Volume

To adjust the microphone volume:

• Press the volume down button briefly for volume -.
• Press the volume up button briefly for volume +.
• Minimum volume is Level 1; Maximum volume is Level 8. The factory preset is Level 7.

Adjusting Frequency

To adjust the UHF microphone frequency:

1. Ensure an applicable distance (within 2 meters) between the UHF microphone and the speaker.
2. Long press the Up/Down keys for 3 seconds, then short press Up/Down to select a new frequency.

Channel and ID Pairing

Channel Selection:

• Start with the current channel displayed (e.g., "A-01").
• Long press the Power or Up/Down button until "SEE" flashes.
• The display will show "Adjusting". Press the Up/Down keys to select the desired frequency channel.
• Once adjusted, the display will show "Done" and "A-02" (example).

ID Locking:

• Long press the "+" or "-" button for over 3 seconds to lock the ID.
• Long press again for 3 seconds to unlock the ID.

ON/OFF Silent Mode

To activate or deactivate Silent Mode:

• Long press the power button for 10 seconds to turn the microphone on/off.
• To enter Silent Mode, long press the power button for 10 seconds until the microphone restarts. The LED screen will flash "00".
• To exit Silent Mode, long press the power button for 3 seconds.

Troubleshooting: Microphone Issues

Scenario: Speaker paired with another UHF wireless microphone or the current microphone is not working.

Follow these steps for forced pairing:

1. Press and hold one of the two buttons (e.g., Power or Up/Down) on the microphone for 10 seconds without releasing.
2. While still holding the button, enter the forced pairing mode. When two indicator lines are flashing, turn off the speaker, then restart it.
3. Release the button on the microphone. The microphone and speaker should now pair automatically.

FAQs

1. Q: No sound from the speaker, but the indicator light is on.

   A1: Check the audio source (flash cards or TF cards) and ensure the audio format is compatible.

   A2: Check if the volume is set too low and increase it appropriately.

2. Q: UHF microphone is not working.

   A1: Turn up the microphone volume appropriately.

   A2: Ensure the batteries are installed correctly.

3. Q: Unable to turn on the device.

   A: Long press the power switch for 8 seconds to force the device to power on.