Assembly Instructions

Introduction

Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and hardware before assembly. Parts that appear missing are often found in the packing materials. If you do not have all the parts listed, please have your dealer contact us, and they will be sent to you immediately.

It is recommended to install protective pads under all legs and supports to avoid damage or scratches when placing furniture on a wood floor or other hard surfaces, and to limit indentation and prevent discoloration if placing on carpet.

Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.

Parts List

Hardware List

**ABOVE HARDWARE ARE PACKED IN CARTON FOR ASSEMBLY.**

Assembly Steps

Step 1: Prepare the Base

Place parts D (Left Arm) and E (Right Arm) inside the main seat base (A). Ensure they are correctly oriented.

[Diagram showing parts D and E being inserted into the main seat base A]

Step 2: Gather Hardware

Prepare the necessary hardware components: 1 (M8 x 32mm Star Knod), 2 (M8 x 90mm Threaded Bolt), 3 (Y-Cable), 4 (Plug/Button), and 5 (Adaptor/Adapter). These are typically found in the hardware pack.

[Diagram showing hardware items 1 through 5 laid out]

Step 3: Connect Power Components

Connect the Y-Cable (3) and the Plug/Button (4) and Adaptor (5) to the respective connection points on parts D and E.

[Diagram illustrating the connection of Y-cable (3), plug (4), and adaptor (5) to parts D and E]

Step 4: Attach Arms and Secure Base

Ensure parts D and E are properly seated in the base. Pull out the [velcro] tape attached to the base to secure the components.

[Diagram showing the seat base A with parts D and E attached, and Velcro tape being pulled out to secure components]

Step 5: Install Back Rests

Attach the back rests (B and C) to the seat base. Align the metal hooks on the back rests with the corresponding slots on the base and push down until they click into place. A close-up shows the mechanism for attaching the back rest.

[Diagram showing the back rests (B and C) being attached to the seat base, with a close-up view of the connection mechanism]

Step 6: Connect Power and Test Recline

Connect the power adaptor (5) to the Y-cable (3) and plug it into a wall outlet ?. Test the reclining function by pressing the recline button.

[Diagram showing the assembled love seat being tilted forward, with the power cable connecting to the adaptor and a wall outlet]

Step 7: Final Check and Operation

The love seat is now completed. The recline button is used to open/close the reclining mechanism. The unit features a [USB Port] and a [Type C Port] for charging devices.

[Diagram of the completed love seat, highlighting the recline button, USB port, and Type C port]

Disassembly

Step 1: Detach Back Rest

To unlock the back of the recliner from its base, push up on the small metal hook built into the side of the recliner.

[Diagram illustrating the disassembly of the backrest by pushing a small metal hook on the side of the recliner]

Upholstery Cushion Care

Follow these instructions for cleaning and maintaining the upholstery:

• Avoid exposing furniture directly to sunlight or heating and air conditioning outlets.
• Exposure to sunlight or heating and air conditioning outlets will fade/damage the top grain leather match PVC.
• Wipe gently with a damp soft cloth to remove dust, dirt, and any buildup.

[Diagram showing a hand wiping the upholstery with a damp cloth]

Safety Warnings and Precautions

WARNING

• Disconnect the electrical plug ? from the wall outlet before cleaning, moving, servicing, or when not in use for an extended period of time.
• Plug directly into a wall outlet. Do not use an extension cord or adaptor.
• Check the condition of the power transformers, electrical cords, plugs, and connectors monthly. Keep the power adaptor and electrical cords away from heat sources. Never operate the unit with a damaged power adaptor, electrical cord, plug, or connector.
• Before moving the product, please disconnect the electrical plug ? from the wall outlet and secure the mechanism to prevent unexpected opening or movement. Never move the product by the mechanism, legrest, handle, or reclining back.
• Do not attempt to disassemble or service the adaptor or motor. No serviceable parts are inside.
• Do not allow the electrical cord to be pinched between moving parts or between the frame and the floor. Do not place the cord under carpet or in a location where it could become worn.
• Unplug the power cord ? immediately if you detect strange odors or fumes coming from the chair.

ATTENTION

• Disconnect the electrical plug ? from the wall outlet before cleaning, moving, servicing, or when not in use for an extended period of time.
• Plug directly into a wall outlet. Do not use an extension cord or adaptor.
• Check the condition of the power transformers, electrical cords, plugs, and connectors monthly. Keep the power adaptor and electrical cords away from heat sources. Never operate the unit with a damaged power adaptor, electrical cord, plug, or connector.
• Before moving the product, please disconnect the electrical plug ? from the wall outlet and secure the mechanism to prevent unexpected opening or movement. Never move the product by the mechanism, legrest, handle, or reclining back.
• Do not attempt to disassemble or service the adaptor or motor. No serviceable parts are inside.
• Do not allow the electrical cord to be pinched between moving parts or between the frame and the floor. Do not place the cord under carpet or in a location where it could become worn.
• Unplug the power cord ? immediately if you detect strange odors or fumes coming from the chair.