House of Marley Liberate Quick Start Guide

Getting Started

Included in the box:

• Liberate Earbuds
• Charging Case
• USB-A to USB-C Charging Cable

Color Options: Available in White and other colors.

Indicators:

• Case Charging LED Indicator
• Earbud Charging LED Indicator

Initial Setup:

1. Open the charging case.
2. Remove the earbuds from the case. They will automatically turn on, and one earbud's LED will blink rapidly, indicating they are in pairing mode.
3. Add "Liberate" to your device's Bluetooth settings.

Note: Earbuds can be manually powered on/off without the case. When earbuds are on, press and hold the touch sensor for 7 seconds to power off, or press and hold for 4 seconds to power on.

Powering On and Pairing:

1. Remove the earbuds from the charging case; they will automatically enter pairing mode.
2. From your device's Bluetooth menu, select "Liberate".
3. After the first pairing, the earbuds will automatically pair with your device when removed from the case.

Unpairing from Device:

To unpair the earbuds from a device, press the touch sensor 5 times. The earbuds will unpair and be ready to pair with another device.

Factory Reset:

1. Place the earbuds in the charging case.
2. Press and hold the reset button inside the case for 3 seconds.
3. The earbud LED will flash 3 times, indicating the reset is complete.

Diagram Description: Illustrations show the earbuds, charging case, USB-C cable, and LED indicators. A diagram depicts selecting 'Liberate' in a device's Bluetooth menu.

Controls

Note: Controls are similar for both TWS (True Wireless Stereo) Mode and Mono Mode.

Touch Sensor Functions:

• Left Touch Sensor: Press and hold for 2 seconds to activate the voice assistant.
• Right Touch Sensor:
  • Press once: Play/Pause audio.
  • Press twice: Skip to the next track.
  • Press three times: Go to the previous track.
• During a Call:
  • Press once: Answer or end the call.
  • Press and hold for 2 seconds: Reject an incoming call.
• Manual Power On/Off:
  • Press and hold for 4 seconds: Power On.
  • Press and hold for 7 seconds: Power Off.
• Pair New Device: Press the touch sensor 5 times to unpair from the current device and enter pairing mode.

Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

FCC RF EXPOSURE STATEMENT: This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Operating frequency band: 2402 – 2480 MHz

Diagram Description: Symbols related to battery disposal (Battery Directive, WEEE) are shown.

Battery Information

Battery Replacement: Your Liberate earbuds include a rechargeable battery designed to last the lifetime of the product. In the unlikely event that you require a replacement battery, please contact Consumer Relations for details on warranty and out-of-warranty replacement services.

Battery Directive: The symbol ? indicates that batteries must not be disposed of in domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points.

WEEE Explanation: The symbol ♻️ indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Declaration of Conformity

Hereby, FKA Brands Ltd. declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from www.thehouseofmarley.co.uk/declaration-of-conformity.

Warranty Information

House of Marley, LLC sells its products with the intent that they are free of defects in manufacture and workmanship for a period of two (2) years from the date of original purchase. This warranty extends only to consumers and does not extend to retailers.

This warranty does not cover damage caused by misuse or abuse; accident; attachment of any unauthorized accessory; alteration to the product; improper installation; unauthorized repairs or modifications; improper use of electrical/power supply; loss of power; dropped product; malfunction or damage of an operating part from failure to provide manufacturer's recommended maintenance; transportation damage; theft; neglect; vandalism; or environmental conditions; loss of use during the period the product is at a repair facility or otherwise awaiting parts or repair; or any other conditions whatsoever that are beyond the control of House of Marley, LLC.

This warranty is effective only if the product is purchased and operated in the country in which the product is purchased.

The warranty provided herein shall be the sole and exclusive warranty. House of Marley, LLC shall have no liability for any incidental, consequential, or special damages. In no event shall this warranty require more than the repair or replacement of any part or parts which are found to be defective within the effective period of the warranty. No refunds will be given.

This warranty provides you with specific legal rights. You may have additional rights which may vary from state to state and country to country.

Contact and Support

Consumer Support:

• Telephone: 1-888-251-1076
• Hours: 8:30 AM to 7:00 PM Eastern Time, Monday through Friday.

House of Marley, LLC Headquarters:

• 3000 N Pontiac Trail
• Attn: Dept. 168
• Commerce Township, MI 48390
• USA

Website: TheHouseofMarley.com

Full Instruction and Warranty Details: Available at https://www.thehouseofmarley.com/customer-support/instruction-books.

Safety Information

Caution: To prevent possible hearing damage, do not listen at high volume levels for long periods.

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. Do not expose the battery to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.