House of Marley Positive Vibration Riddim Quick Start Guide
Model: EM-JH153
What's in the Box
The box contains the following items:
- A. Headphones: The main audio device.
- B. Charging Cable: A USB-C to USB-A cable for charging the headphones.
- C. Aux 3.5 Cable: A cable for wired audio connection.
- D. Documentation: Includes this Quick Start Guide and Warranty Information.
Product Overview & Controls
The Positive Vibration Riddim headphones feature intuitive controls and indicators.
Left Earcup Controls:
- Button A: Volume Up / Track Forward: Press the [+] button once to increase volume or twice quickly to skip to the next track.
- Button B: Power / Play/Pause / Call Button:
- Press and hold for approximately 4 seconds to turn the headphones On or Off.
- Press once to play or pause music, or to answer/end a phone call.
- Press twice quickly to activate voice assistant or redial the last number.
- Press and hold for 2 seconds to reject an incoming call.
- Button C: Volume Down / Track Backward: Press the [-] button once to decrease volume or twice quickly to go to the previous track.
- Button D: Aux-in Port: Connect the included 3.5mm aux cable for a wired connection.
Right Earcup Features:
- E. Removable Earcups: The earcups can be removed for cleaning or replacement.
- F. Headband Adjustment: Slide the headband sliders to adjust the fit for comfort.
- G. Gaming Mode / Movie Mode: Activate special audio modes.
- H. LED Indicator: A multi-color LED light that shows the status of the headphones.
- I. USB-C Charging Port: Connect the USB-C cable here to charge the headphones.
Status and LED Indication
Status | LED Indication |
---|---|
Low Power | Blinking Red |
Charging | On (Red) |
Pairing Mode | Fast Blinking Blue/Red |
Bluetooth® Not Connected | Slow Flash Blue |
Bluetooth® Connected | Slow Flash Blue |
Phone Call | Fast Blinking Blue |
Getting Started
Powering On/Off
Press and hold the Power button (Button B) for approximately 4 seconds until the LED indicator lights up.
Pairing a New Device
Ensure the headphones are powered off. Press and hold the Power button (Button B) for approximately 6 seconds until the LED indicator flashes blue and red, indicating pairing mode.
On your device (e.g., smartphone), go to Bluetooth settings, search for "Positive Vibration Riddim", and select it to connect.
Music and Call Management
Music Control
- Volume Up / Next Track: Press Button A ([+]) once.
- Volume Down / Previous Track: Press Button C ([-]) once.
- Play/Pause Music: Press Button B once.
Phone Call Management
- Answer/End Call: Press Button B once.
- Reject Incoming Call: Press and hold Button B for 2 seconds.
- Redial Last Number / Voice Assistant: Press Button B twice quickly.
Compliance and Safety Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Battery Safety: This symbol [Battery Disposal Symbol] indicates that batteries must not be disposed of in domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points. Risk of explosion if the battery is replaced by an incorrect type.
WEEE Explanation: This marking [WEEE Disposal Symbol] indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly.
FKA Brands Ltd. declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from www.thehouseofmarley.com/declaration-of-conformity.
FCC RF Exposure Statement: This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISEDC Statement: This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s).
Warranty Information
House of Marley, LLC warrants this product to be free from defects in material and workmanship for a period of two (2) years from the original purchase date.
What is Covered: Defects in material and workmanship under normal use and service.
What is Not Covered: Damage caused by misuse, abuse, accident, unauthorized accessories, alterations, improper installation, unauthorized repairs, improper power supply use, dropped product, lack of maintenance, transportation damage, theft, neglect, vandalism, or environmental conditions. Also excludes products purchased used, repaired, repackaged, or sold on auction sites.
To Obtain Warranty Service: Contact Consumer Relations at 1-888-251-1076. Please have your model number (EM-JH153) ready.
For specific warranty terms in Australia and New Zealand, please refer to the full warranty documentation.
For more detailed information, visit: www.thehouseofmarley.com/instructionbooks