Key Features
- Auto-Swing for horizontal louvers
- Genius Core ultra-low compressor speed of 12Hz
- 46° Freeze Protection
- Smart Kit Ready
- Turbo Mode
- Follow Me Mode
- Smart kit Included
Product Overview
This document provides detailed technical specifications for the Cooper&Hunter CH-REL36-230VO + CH-R36MELVWM-230VI split system air conditioner. It includes performance data, electrical requirements, dimensions, and installation guidance.
Certifications include AHRI Certified, ENERGY STAR, ETL, and others.
Image of a white, rectangular indoor air conditioning unit.
Image of a square outdoor air conditioning unit with a fan grill on the front and control panel on the side.
Indoor Unit Specifications
Model: CH-R36MELVWM-230VI
| Parameter | Unit | Value | |
|---|---|---|---|
| Cooling | Capacity | Btu/h | 36,000 (6,600~36,800) |
| Input | W | 3,830 (735~4,400) | |
| Rated current | A | 17 (3.4~19.8) | |
| EER/EER2 | Btu/w | ||
| SEER/SEER2 | Btu/w | ||
| Heating at 47 °F | Capacity | Btu/h | 36,000(11,400~44,000) |
| Input | W | 3,580 (1,015~4,800) | |
| Rated current | A | 16 (4.6~21.5) | |
| COP | W/W | 2.95 | |
| HSPF4/HSPF2-4 | 9.1 | ||
| HSPF5/HSPF2-5 | 7 | ||
| Indoor fan motor | Qty | 1 | |
| Input | W | 58 | |
| RLA | A | 1 | |
| Indoor air flow (Turbo/Hi/Med/Lo) (No duct) | CFM | 871.1 / 676.9 / 447.3 / 329.6 | |
| ESP (range) | In.wg. | / | |
| Indoor noise level (Hi/Med/Lo) | dB(A) | 51/45/33.5 | |
| Dehumidification | L/H | 10.78 | |
| Indoor unit | Dimensions (WxDxH) | inch | 49.57 x 11.14 x 14.25 |
| Packing (WxDxH) | inch | 52.76 x 17.72 x 15.16 | |
| Net/Gross weight | lbs | 43.43/56.88 | |
| Drainage water pipe diameter | inch | 5/8" | |
| Refrigerant piping (Liquid side/Gas side) | inch | 3/8"/5/8" | |
| Design pressure | PSIG | 550/340 | |
| Room temperature | Controller | remote controller | |
| Cooling | F | 60~90 | |
| Heating | F | 32~86 |
Outdoor Unit Specifications
Model: CH-REL36-230VO
| Parameter | Unit | Value | |
|---|---|---|---|
| Power supply | V, Ph, Hz | 208-230V, 1Ph, 60Hz | |
| Min. circuit ampacity | A | 33 | |
| Max. fuse | A | 35 | |
| Compressor | Model | KTF250D22UMT | |
| Type | ROTARY | ||
| Brand | GMCC | ||
| Capacity | Btu/h | 27.62 | |
| Input | W | 2.2 | |
| Rated current (RLA) | A | 21.5 | |
| Refrigerant oil | oz | VG74 22.7 | |
| Outdoor fan motor | Qty | 1 | |
| Input | W | 120 | |
| RLA | A | 1.3 | |
| Speed | r/min | 880/500 | |
| Outdoor air flow (Max) | CFM | 2,235.3 | |
| Outdoor noise level (Max) | dB(A) | 63 | |
| Throttle type | EXV+Throttle valve | ||
| Outdoor unit | Dimensions (WxDxH) | inch | 37.24 x 16.14 x 31.89 |
| Packing (WxDxH) | inch | 42.91 x 19.68 x 34.84 | |
| Net/Gross weight | inch | 150.35/160.27 | |
| Refrigerant | Type | R454B | |
| Precharge | ft | 25 | |
| Additional charge for 1/4 inch liquid pipe | oz | / | |
| Additional charge for 3/8 inch liquid pipe | oz | 0.32 | |
| Liquid side/Gas side | inch | 3/8"/5/8" | |
| Refrigerant piping | Max. pipe length | ft | 213.2 |
| Max. difference in level | ft | 98.4 | |
| Ambient temperature | Cooling | F | -13~ 122 |
| Heating | F | -13~75 |
Installation Notes & Dimensions
Indoor Unit Installation Location:
Select the installation location carefully. The diagram shows the indoor unit profile and mounting plate. Key dimensions for installation include:
- Height: 6" (15cm)
- Width: 4-3/4" (12cm) from sides
- Length: 70" (180cm)
Diagram illustrating the dimensions and mounting plate for the indoor unit. It shows a side profile with height, width, and length measurements, and indicates options for piping exit (left-hand side, right-hand side, left rear, right rear).
Piping Exit Options: Based on the wall hole position relative to the mounting plate, choose the side from which the piping will exit the unit. There are four options for the exit direction.
Indoor Unit Dimensions:
- Width (W): 49.57 inches (1259mm)
- Height (H): 14.25 inches (362mm)
- Depth (D): 11.14 inches (283mm)
Wall Hole Diameter: The diagram indicates a required wall hole diameter of Φ3.54 inches (90mm).
Note on Gas Side Pipe: When the gas side connective pipe is 5/8 inch (16mm) or more, the wall hole should be 3-1/2 inches (90mm).
Diagrams showing the external dimensions of the outdoor unit from front, side, and top views. Key dimensions include height (31-7/8in / 810mm), width (40-1/2in / 1030mm), and depth (16-1/8in / 410mm). A detailed view (DETAIL A) shows connection ports with dimensions of 2-7/8in (73mm) and 7/8in (24mm).
Outdoor Unit Dimensions:
- Height: 31-7/8 inches (810mm)
- Width: 40-1/2 inches (1030mm)
- Depth: 16-1/8 inches (410mm)
Connection Port Details (DETAIL A):
- Port 1: 2-7/8 inches (73mm)
- Port 2: 7/8 inches (24mm)
General Notes
Cooper&Hunter products are subject to continuous improvements. Cooper&Hunter reserves the right to modify product design, specifications, and information in this data sheet without notice and without incurring any obligations. Actual unit design may differ from images shown in this submittal sheet.
