This manual is written in accordance with the EasyThreed X2 3D printer.
- Printer upgrades and equipment models may be slightly different; this is a normal phenomenon based on the actual products received.
- User's manual is included on the TF card.
Parts List
Take out parts from the package and check if all parts are listed below:
| Component | Description |
|---|---|
| Printer Base | The main structure of the 3D printer. |
| X,Z Axis, Print Head | The assembly responsible for X and Z movement, including the print head. |
| Control Box | Houses the printer's electronics and connections. |
| Filament Holder 1 | A bracket for holding filament spools. |
| Filament Holder 2 | An alternative or additional bracket for holding filament spools. |
| Power Supply | The adapter to provide power to the printer. |
| Screw Driver | A tool for assembly. |
| Screws (2 pcs) | Fasteners for securing components. |
Installation Steps
Step 1: Install the XZ Axis set to the Printer Base.
1. Put the Z-axis motor wire through the designated hole.
2. Install the XZ Axis assembly downward, following the direction indicated by an arrow [downward arrow].
Visual Description: The image shows the XZ Axis assembly being attached to the printer base. The Z-axis motor wire is guided through an opening before the assembly is mounted.
Step 2: Secure the XZ Axis.
After inserting the XZ Axis, fix it in place with 2 screws.
Visual Description: The image displays the XZ Axis assembly firmly attached to the printer base, secured by two screws.
Step 3: Connect the Z-axis motor line.
Connect the Z-axis motor line to the output line of the printer control box as shown in the figure below.
Visual Description: The image illustrates the Z-axis motor wire connector being plugged into its corresponding port on the printer's control box.
Step 4: Install the Filament Holder.
Install the Filament Holder as shown below.
Important Notice: This filament holder is designed to hold filament spools weighing up to 250g.
Visual Description: Images show the filament holder being mounted onto the printer frame.
Getting Started
Connect the power supply and begin your 3D printing journey.
Related Documents
 |
Easythreed X4 3D Printer Installation Manual | Step-by-Step Guide Comprehensive installation manual for the Easythreed X4 3D printer. Learn how to assemble your printer with clear steps, parts list, and important notices from Shenzhen EasyThreed Technology. |
 |
EasyThreed X1 3D Printer Install Manual Step-by-step installation guide for the EasyThreed X1 3D Printer, covering parts list and assembly instructions for a successful setup. |
 |
EasyThreed NANO 3D Printer User Manual Comprehensive user manual for the EasyThreed NANO 3D printer, covering setup, operation, maintenance, and troubleshooting for creating custom 3D prints. |
 |
EasyThreed K1 3D Printer User Manual Comprehensive user manual for the EasyThreed K1 3D printer, covering specifications, unboxing, installation, operation, maintenance, and troubleshooting for beginners. |
 |
Easythreed K10 3D Printer User Manual and Guide Comprehensive user manual for the Easythreed K10 3D printer, covering setup, operation, maintenance, and troubleshooting. Learn to print with PLA and TPU filaments using Easyware or CURA slicer. |
 |
EasyThreed X4 3D Printer User Manual Comprehensive user manual for the EasyThreed X4 3D printer, covering specifications, unboxing, installation, setup, printing, maintenance, and troubleshooting. |
 |
Easythreed X3 3D Printer User Manual A comprehensive user manual for the Easythreed X3 3D printer, covering specifications, unboxing, installation, operation, maintenance, and FAQs. This guide is designed for beginners and provides detailed instructions for using the X3 3D printer. |
 |
EasyThreed K7 MINI 3D Printer User Manual User's manual for the EasyThreed K7 MINI 3D Printer, providing operational guidance and specifications. |