New Design Joist Adjustable Wall-Mounted Pullup Bar
Step 1: Parts & Accessories Clarification
- A: Cross Bar Bolt
- B: Cross Bar Ring
- C: Handle Bolt
- D: Anchor Bolts
- E: Knob bolt and Nut
Assembly Instructions
Step 2: Assemble the Handle Bar
Fix the handles to the cross bar using the C Handle Bolts and nuts. Ensure they are securely attached.
Step 3: Assemble the Main Frame
Attach the main frame components using the D Anchor Bolts and nuts.
Step 4: Connect Cross Bars and Final Assembly
Connect the left and right cross bars to the main frame using the A Cross Bar Bolts and B Cross Bar Rings with nuts. Tighten all bolts securely. The pullup bar is now completely assembled.
Mounting Bolt Hole Spacing
The following diagram illustrates the required bolt hole spacing for wall mounting:
| Dimension | Value | Description |
|---|---|---|
| Central Spacing | 375mm | Distance between the two primary vertical mounting hole pairs. |
| Vertical Spacing | 60mm | Distance between the two holes within each vertical mounting pair. |
| Offset Spacing | 144mm | Distance from the outer edge of the central mounting pairs to the next set of vertical mounting holes. |
This diagram indicates the precise placement needed for secure installation.
