Fanatec CSL Steering Wheel P1 V2 Quick Start Guide

A. Package Content

Ensure all items are present:

• 1x CSL Steering Wheel P1 V2
• 1x QR1 Lite Wheel-Side

Note: Additional accessories may be sold separately.

B. Steering Wheel Attachment

Follow these steps to attach the wheel to your Fanatec Wheel Base:

1. Align the steering wheel with the wheel base shaft.
2. Slide the wheel onto the shaft until it clicks into place.
3. Secure the wheel by tightening the clamp or screw as indicated. Ensure it is firmly attached. (Recommended torque: 1 Nm)

Visual Description: Diagrams show aligning the wheel's central hub with the wheel base's drive shaft, pushing it on, and then securing it with a screw.

C. Centre Calibration

Calibrate the steering wheel's center position for accurate input:

1. Access the Tuning Menu on your wheel base or via connected software.
2. Navigate to the 'CAL' (Calibration) option.
3. With the wheel perfectly centered, confirm the calibration.
4. Exit the Tuning Menu.

Visual Description: Steps involve entering a menu, selecting a calibration option, centering the wheel, and confirming.

D. Shifter Calibration

Calibrate your shifters (especially sequential shifters) for proper function:

Perform the following steps for each gear:

1. Select a gear.
2. Move the shifter to the neutral position.
3. Confirm the input.

Visual Description: Diagrams illustrate selecting a gear, moving to neutral, and repeating for all gears.

E. Modes

The steering wheel may support different modes or profiles, which can be dependent on the connected Fanatec Wheel Base. Refer to your wheel base manual for specific mode configurations and options.

Visual Description: Icons and text indicate that modes are 'Wheel Base Dependent'.

F. Tuning Options

Access the Tuning Menu to adjust various settings for your wheel and pedals. This allows for fine-tuning of force feedback, button assignments, and other performance parameters.

Visual Description: Diagrams show how to enter and exit the Tuning Menu.

G. Button Inserts

The CSL Steering Wheel P1 V2 may come with interchangeable button inserts or caps to customize button layout or feel. Refer to the diagrams for placement.

Visual Description: Diagrams show various button inserts and their intended positions on the wheel.

H. Quick Release Attachment

Detailed steps for attaching the QR1 Lite wheel-side component:

1. Ensure the QR1 Lite is properly aligned with the wheel base shaft.
2. Slide the QR1 Lite onto the shaft.
3. Secure the QR1 Lite using the provided mechanism (e.g., tightening a screw or engaging a locking system).

Visual Description: Diagrams show the QR1 Lite being attached to the wheel base, with specific attention to alignment and locking.

I. Button Mapping

The following table outlines the default button assignments for PC and PlayStation platforms. '*GSB' denotes Game-Specific Buttons, which may vary by game.

Visual Description: A table detailing button numbers and their corresponding functions on PC and PlayStation, including game-specific assignments.

J. Support

For further assistance, drivers, firmware updates, and detailed manuals, please visit the official Fanatec support channels:

• Driver & Firmware Downloads
• Instruction Manuals
• Frequently Asked Questions (FAQ)
• Product Specific QR Link

Visual Description: Links to Fanatec's website for drivers, manuals, and support.

Warranty and Compliance

Warranty: This product is covered by the warranty provided by Endor AG. Please refer to the included warranty sheet and the terms and conditions on the Fanatec website (fanatec.com) for details.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. Modifications not explicitly described in the manual may void compliance.

China RoHS 2: The product adheres to China RoHS 2 regulations regarding the restriction of hazardous substances. The Environmental Protection Use Period (EPUP) is 10 years.

Manufacturer & Distributor Information:

Designed and developed by Endor AG in Germany.

Manufactured and distributed by Endor AG, E.ON-Allee 3 - 84036 Landshut - Germany.

Imported and distributed by Endor America LLC, 8200 Wilshire Blvd. Suite 200 - Beverly Hills CA 90211 - USA.

Contact information for EU, US/Canada, Australia, and Japan is available on the Fanatec website.

Visual Description: Sections detailing warranty by Endor AG, FCC compliance statements, China RoHS 2 information, and company addresses.