NuPhy NOSZS Quick Guide
Welcome to your NuPhy NOSZS keyboard. This guide will help you set up and customize your device.
01 System Selection
Choose your operating system mode for optimal compatibility.
- Fn + O: Windows Mode
- Fn + P: Mac Mode
02 Backlight Settings
Control your keyboard's backlighting effects.
Keycap representations: Fn, ↑, ↓, ←, →, 〈, 〉, ,, .
- Fn + ↑/↓: Backlight Brightness + / -
- Fn + 〈/〉: Backlight Speed + / -
- Fn + ←: Backlight Effect Switching
- Fn + →: Backlight Color Switching
03 RGB Sidelight
Configure the RGB lighting strips on the sides of your keyboard.
Left Side Running Light
- Indicator for Caps Lock: Caps Lock
Right Side Running Light
- 3 (Color Indicator): Win Mode
- 3 (Color Indicator): Mac Mode
- 3 (Color Indicator): Sleep Mode On
- 3 (Color Indicator): Sleep Mode Off
Note: The number '3' likely refers to a specific color or status indicator for these modes, as depicted in the original diagram.
04 Sidelight Settings
Adjust the sidelight brightness, effects, color, and speed.
Keycap representations: Fn, M, ↑, ↓, ←, →, 〈, 〉
- Fn + M + ↑/↓: Sidelight Brightness + / -
- Fn + M + ←: Sidelight Effect Switching
- Fn + M + →: Sidelight Color Switching
- Fn + M + 〈/〉: Sidelight Speed + / -
05 Sleep Mode Setting
Manage the keyboard's sleep mode to conserve power.
Keycap representations: Fn, ], [, }
- Fn + ]: Turn Sleep mode On or Off
* If there is no operation on the keyboard for 6 minutes, it will turn off the lights and enter sleep mode. To extend battery life, it is recommended to keep Sleep Mode ON.
06 Other Key Combos
Useful key combinations for advanced functions.
Keycap representations: Fn, {, [, DEL, HOME, INS, END
- Fn + [: Long press for 3 seconds to restore factory settings
- Fn + DEL: Insert (INS)
- Fn + HOME: End (END)
07 VIA Keymap Configurator
This keyboard is compatible with VIA, a third-party open-source software used to configure keymaps, light effects, and macros.
To obtain the latest version of VIA, visit: nuphy.com/pages/console.
If VIA fails to detect your keyboard under wired mode, please feel free to contact NuPhy for technical support.
Mode Information:
- Mac Mode: LAYER 0 / 1
- Win Mode: LAYER 2 / 3
About NuPhy
Founded by a small team of passionate dreamers, NuPhy has always been at war with boredom and uninspiring designs.
Contact: service@nuphy.com
Made in China.
