Philips MasterConnect System
Signify LED Electronics, July 2024
Introduction
Philips MasterConnect is a simple, cost-effective wireless lighting system enabling energy savings and comfort for all target spaces. It creates value for end users, OEMs, and installers today and tomorrow.
Key Benefits
Energy Savings
- Energy savings as light adapts to actual usage of spaces.
- Additional savings of up to 40% compared to standard LED lighting.
- Short payback times thanks to lowered energy costs.
Easy Luminaire Integration
- Simple building blocks.
- "Single Box" design with a 2-wire LV connection between SR/D4i driver and EasySense sensor.
- No extra components for control, leading to cleaner assembly, fewer failure points, and no ceiling clutter.
Intelligent and Easy to Use
- Out-of-the-box occupancy and daylight harvesting.
- Wireless group occupancy sharing and group control.
- Easy configuration via the Philips MasterConnect app.
- Tunable White control with FlexTune SR driver.
- Point & select luminaires with a standard flashlight.
- Room-level energy report.
Cost Effective
- Wireless control.
- Low system cost, requiring only the SR/D4i driver and EasySense sensor.
- No DALI wiring or other control infrastructure required.
- Less installation time, creating cost savings.
MasterConnect System: Room-based Lighting Control with LLLC
The system offers room-based lighting control with Luminaire Level Control (LLLC) using Zigbee technology. It operates without a gateway, providing:
- Low setup cost.
- Easy installation and commissioning.
- Easy maintenance.
- Added value through advanced control.
The system utilizes Zigbee for communication and can be controlled via Bluetooth/BLE with a flashlight (optional) or a mobile phone with the Philips MasterConnect app for project/system setup and energy report generation.
Key features include Networking of Luminaires and Devices, Occupancy Sensing, Daylight Harvesting/Photocell Control, High-End Trim, Zoning, Luminaire and Device Addressability, and Continuous Dimming.
MasterConnect Apps
Philips MasterConnect App (for Installers)
Purpose: Commissioning & configuration by installers.
Configurable parameters include:
- Occupancy Based Control: Auto-ON/Auto-OFF, Manual ON/Auto-OFF, Manual ON/OFF.
- Daylight based control.
- Group occupancy sharing and light behavior.
- Light levels: Field task level, Eco on level, Background light level.
- Scenes including CCT (Correlated Color Temperature).
- Timers: Hold Time, Prolong time, and grace fading.
Philips MC Control App (for End-Users)
Purpose: Control by end-users (using the phone to control lights, like with a switch).
End User Control:
- Switch on/off.
- Tuning light intensity and color temperature.
- Recalling scenes.
Application Components
Office Application Required Components
Philips EasySense Sensor (LLLC)
- Occupancy and daylight harvesting in every luminaire.
- Simple two-wire connection to Xitanium SR driver.
- Tunable White control with FlexTune SR driver.
- Wireless grouping of sensors and control.
- Group control for up to 120 luminaires via Zigbee 3.0 mesh technology.
- Flashlight point & select for easy commissioning.
- Up to 3 meters mounting height.
Advance SR driver (or D4i certified Driver)
- Standardized open digital interface (D4i/SR).
- Low voltage power supply for sensors.
- 4% accurate power metering (indoor drivers).
- Diagnostics.
Philips MasterConnect App
- Easy grouping, zoning, and configuration via Bluetooth Low Energy.
- Room-level Energy report generation.
- No special tooling or extensive training required.
- Available for iOS and Android smartphones.
Wireless Switches
- Allow manual control of zone or groups of luminaires.
- Supported switches include Philips SWS200, RunLessWire FOH, and Illumra.
High-Bay Application Required Components
Similar components as office applications, with the Philips EasySense Sensor supporting 5m to 16m mounting height and IP65 rating.
Flexible Manual Control Options
Wireless Switches & MC Control App provide flexible manual control:
- Illumra ZBT-S2AWH (Kinetic): Short press: ON, Long press: DIM UP; Short press: OFF, Long press: DIM DOWN; Short press: SCENE 1, Long press: CCT UP; Short press: SCENE 2, Long press: CCT DOWN.
- Philips SWS200 (Battery): Short press: ON, Long press: DIM UP; Short press: OFF, Long press: DIM DOWN; Short press: SCENE 1/2, Long press: CCT Up/Down.
Using the MasterConnect App, light intensity level and CCT can be defined for the ON, Scene 1, and Scene 2 buttons of the Wireless switches and MC Control App.
Compatible Wireless Zigbee Green Power Switches
| Brand | Catalog # | Signify 12NC / Available via | Energy Source | Notes |
|---|---|---|---|---|
| Illumra | ZBT-S1AWH | Purchased via Illumra suppliers | Kinetic | Available in popular colors. |
| Illumra | ZBT-S2AWH | Purchased via Illumra suppliers | Kinetic | Available in popular colors. |
| Philips | SWS200 | 913701046713 | Battery powered | Very easy to commission. From SNS/SNH211 MC and higher models. (Not compatible with SNS210 MC). |
| RunLessWire | FOH-DSWH | Via RunLessWire suppliers (including Amazon & DIY) | Kinetic | Part of Hue family. Contains both single and dual rockers for local install. |
| Philips | UID8451/10 | 913700364403 | Kinetic | Previous generation and not recommended. Needs some dis-assembly for commissioning. |
Commissioning & Configuration
Recommended flow for installers (estimated < 5 minutes for an average room):
- Create Project
- Create a group
- Commission lights into a group
- Create zones (if required)
- Commission ZGP sensors or switches at group level
- Configuration on device level (if required)
- Configuration on zone level (if required)
- Configuration on group level
- Commissioning ZGP sensors or switches at zone level (if required)
- Backup Project to Cloud
- Share project with other installers/facility manager as required
SR Bridges
SR Bridges provide the interface between EasySense sensors and 0-10V LED Drivers. SRB-Lite is also available.
SR Bridge Specifications
- Input Voltage: 120/277/347V
- Switched Output: Red wire
- Max. Load requirements: 6.1A @ 120V/208V, 5.3A @ 240V, 4.6A @ 277V, 3.7A @ 347V
- Class 2 Dimming Interface 0-10V: Violet wire (0-10V+), Grey wire (0-10V-)
- SR Sensor Control Interface: Violet/White wire (SR+), Grey/White wire (SR-)
Note: See Appendix A for recommended maximum number of Drivers per SR Bridge. For more detailed information, visit www.philips.com/xitaniumsr/na.
SR Bridge Applications:
- Luminaire with multiple 0-10V drivers.
- Luminaire with 347V 0-10V driver.
SR Bridge Application (multiple 0-10V luminaires):
Diagram illustrating the SR Bridge application for multiple 0-10V luminaires shows wiring connections within a junction box. The SNS212 MC (with Ceiling Mount Bracket) supports Room level ON/OFF/Dimming, Room level Energy Metering, and Room level Sensing. Maximum load on Output Line is specified as 120V Mains: 730VA (6.1A) and 277V Mains: 1270VA (4.6A). The SR Bridge (SRB-BS) can be mounted on the cover plate of the metal box.
SRB-Lite Application
Diagram for the SRB-Lite Application shows wiring for a luminaire with multiple 0-10V drivers. Specifications include Input Voltage (120-240Vac, 240-277Vac), Max Load (600VA, 831VA), Stby Power (<1.0W, <1.0W), and Surge Protection (>6.0KV, >6.0KV). An optional EasySense/MasterConnect Sensor can be connected.
Options for BMS Integration
Dry Contact Interface to BMS Controller using SR Bridge:
Diagram illustrating the dry contact interface to a BMS Controller using the SR Bridge shows the connection of the SR Bridge and SNS212 MC to a BMS Controller. It details how occupancy signals from the SNS212 MC are translated to ON/OFF commands for the SR Bridge's switched output. The system explains the use of a Bodine GTDU for integrating with BMS systems, connecting the switched HOT output of the SRB to the Bodine GTDTU and then connecting the required dry contact output (NC or NO) from GTDU to the BMS system controller. Any properly rated product that translates switched AC mains input to NC/NO relay outputs can be used.
SNS212/SNH212 MC Improvements compared to SNS/SNH211 MC
| Feature Improvement | Benefits |
|---|---|
| EasySense SNS212/SNH212 MC products are both SR & D4i Certified | Sensors can be paired with Advance Xitanium SR drivers and SR Bridges. D4i certification allows luminaire manufacturers to use any D4i certified LED driver for supply chain and design flexibility. |
| EasySense SNS212/SNH212 MC products are Zigbee 3.0 Certified | Zigbee 3.0 enables interoperability with third-party systems and products. Combined with D4i, it brings standardization and openness. |
| 212 MC product family features a more powerful microprocessor | Improved commissioning speed, increased level of security, and readiness for future enhancements. |
Product Availability
| Product | Order Code (12NC) | Availability | Last Order Date |
|---|---|---|---|
| EasySense SNS212 MC | 929003416313 | 1st June 2024 | N/A |
| EasySense SNH212 MC | 929003416413 | Mid Q3-2024 | N/A |
| EasySense SNS211 MC | 929003417313 | Now | 31st January 2025 |
| EasySense SNH211 MC | 929002721813 | Now | 31st January 2025 |
MasterConnect System – Product Roadmap
Using SNx212 technology:
| Product | Timing |
|---|---|
| EasySense SNS412 MC (RF only device) | Q4-2024 |
| EasySense Occu-DL BP IP20 sensor MC (Battery Powered Occupancy & Daylight sensor) | Q4-2024 |
| EasySense SNM212 MC (Bottom Mount High-bay Sensor) | Late Q4-2024 |
| MC Gateway for HCL Scheduling (circadian lighting) and project Dashboard | Q1-2025 |
| MC Wireless Plug-load controller with 0-10V output | |
| MC Wireless Fixture Adapter for 0-10V drivers |
Key Specification Points: Philips MasterConnect System with EasySense SNS212 MC
The Wireless Networked Lighting Control System must be Philips MasterConnect or equivalent, featuring:
- Easy commissioning and configuration with state-of-the-art APPs available on iOS and Android phones.
- No gateway required for the operation of the wireless lighting control system.
- Allows wireless group (wireless network) size of up to 120 nodes per room/area. Projects can have many such groups.
- LLLC with D4i & Zigbee certification.
- LLLC with integrated Occupancy sensing, Daylight harvesting, and wireless communication.
- LLLC with out-of-the-box occupancy sensing and daylight harvesting right after installation.
- LLLC with open protocol interfaces for Driver (SR/D4i) and wireless (Zigbee and BLE).
- LLLC with simple 2-wire connection to LED driver.
- LLLC with Zhaga Book 20 compliant mounting bracket.
- DLC NLC QPL listed lighting control system.
- Allows for complete system setup (commissioning and configuration) for lighting projects without any internet connection.
- Allows for complete project backup to cloud and sharing with other installers/facility managers when internet connection becomes available.
- Easy commissioning facilitated by luminaire selection with normal flashlight pointing.
- Easy commissioning facilitated by luminaire selection with BLE-based discovery and selection when pointing is not possible.
- Allows for easy display of luminaire brand/model in the APP (in conjunction with D4i/ANSI C134.4 Part 251 compliant digital drivers or bridge in the luminaire).
- APP-based energy reporting using real measured values from SR/D4i drivers (no gateway required). Feature listed on DLC NLC.
- Wireless control of tunable white luminaires with programmable scenes comprising of CCT and Dim level.
- Configuration of sensor parameters at group, zone, and individual fixture levels (e.g., Occupancy/Daylight sensing can be enabled or disabled for individual sensors in a zone or group to best fit application needs).
- Configuration of lighting scenes at group, zone, and individual fixture levels (e.g., a presentation scene can switch projector lights off and the rest of the lights to dim level).
- Configuration of high-end trim, partial on, and background (low end) light levels.
- Default configuration for granular dimming.
- Configuration of all lighting control modes (auto-on/auto-off, manual-on/auto-off, manual on/off).
- Configuration for occupancy sensing or vacancy sensing.
- Configuration option for lights to never switch off (e.g., Stairwell, corridor etc.).
- Highly flexible switch placement with no wires - Compatibility with off-the-shelf Kinetic Zigbee Green power switches.
- Highly flexible switch placement with no wires - Compatibility with battery-operated Zigbee Green power switches.
- Lighting control option with no switches at all using the end-user APP.
