Blackstorm WD100 Wireless Keyboard and Mouse

Safety

• Read and keep these instructions for future reference. Following these safety instructions helps ensure safe use and prevents damage or injury.
• Before first use, check that the scope of delivery is complete and contains all parts listed in the technical data, and that the parts are undamaged. Do not use the device if parts are missing or damaged.
• Do not attempt to repair the device yourself. If parts are faulty, return the device to the dealer or an authorized service center.
• Remove all protective films and stickers from the device.
• Use the device only in dry indoor areas at room temperature.
• Do not expose the device to fire, direct sunlight, other heat sources, extreme cold, or corrosive substances.
• The device can be used by children aged 8 and above, and persons with physical or mental limitations or lack of experience and knowledge, if supervised or instructed on safe use and the dangers involved. Children must not play with the device. Children must not clean or maintain the device without adult supervision.
• The keyboard operates with two 1.5V AAA batteries. The mouse operates with one 1.5V AA battery. The devices are supplied without batteries, which are sold separately.
• Do not short-circuit the batteries.
• If a child or pet swallows a battery, seek immediate medical attention as this can cause severe internal burns within two hours. Keep batteries out of reach of children and pets.
• If you suspect a battery has been swallowed or inserted into a body opening, seek immediate medical help.
• Check battery compartment polarity markings before inserting batteries and always follow them.
• If a battery leaks, remove the leaked fluid from the battery compartment and replace all batteries with new ones.
• Do not attempt to recharge non-rechargeable batteries. Do not use rechargeable batteries or accumulators.
• Replace all batteries every three months or when a battery is depleted. Always replace all batteries at the same time, never mix old and new or different battery types.
• Remove batteries from the device when it is not used for a long time or when storing it for recycling.
• Never incinerate batteries, as this can cause explosions and severe injuries.
• Cover both battery terminals with tape before handing them in for recycling to prevent short circuits.

Technical Information

Verkkokauppa.com Oyj guarantees that the Blackstorm WD100 wireless keyboard and mouse comply with Directive 2014/53/EU.

Parts

Diagram showing the keyboard and mouse components:

• 1. Keyboard Battery Compartment
• 2. Keyboard Battery Cover
• 3. Kickstand
• 4. Infrared Sensor
• 5. USB Receiver
• 6. Mouse Battery Compartment
• 7. USB Receiver Storage Compartment
• 8. Mouse Battery Cover

Usage

Inserting Batteries

The keyboard and mouse function wirelessly. Insert batteries into the keyboard and mouse before use.

Inserting Batteries into the Keyboard:

1. Open the battery compartment cover of the keyboard.
2. If old batteries are present, remove them before inserting new ones.
3. Insert two AAA batteries into the compartment, observing the polarity markings.
4. Close the cover; it is secured when it clicks into place.

Inserting Batteries into the Mouse:

1. Open the battery compartment cover of the mouse.
2. If old batteries are present, remove them before inserting new ones.
3. Insert one AA battery into the compartment, observing the polarity markings.
4. If you intend to use the mouse immediately after inserting batteries, remove the USB receiver located next to the battery compartment and slide the ON/OFF switch to the ON position.
5. Close the cover; it is secured when it clicks into place.

Note: Replace the keyboard batteries when the red indicator light on the keyboard flashes. Replace the mouse battery at the latest when it is depleted.

Connection

The keyboard and mouse use a wireless 2.4 GHz connection. You need the USB receiver, located under the battery compartment cover of the mouse. The keyboard and mouse use the same USB receiver.

Connecting to Your Computer:

1. Remove the USB receiver from under the mouse's battery compartment cover and slide the mouse's ON/OFF switch to the ON position.
2. Plug the USB receiver into a USB-A port on your computer.
3. The receiver will automatically connect to the keyboard and mouse. No separate driver installation is required.
4. The green indicator light on the keyboard illuminates when the keyboard is wirelessly connected to the computer.

Shortcuts

The keys in the top row of your keyboard have shortcuts to control your computer's settings and functions. Press and hold the Fn key while pressing one of the keys in the top row to activate the shortcuts. The shortcuts are listed in the table below.

Care, Storage, and Recycling

• Clean the device with a soft, dry cloth. Do not use any other cleaning accessories, cleaning agents, or sharp objects for cleaning.
• Store the device at room temperature in a dry indoor area.
• Keep the device in its original packaging if not used regularly.
• Safe Disposal of Product: At the end of its life cycle, the device or its accessories must not be disposed of with normal household waste. Take the device for disposal to a dealer or a local recycling center. For more information, contact your dealer or disposal company.

[WEEE symbol indicating separate collection for electrical and electronic equipment]