Dewenwils Indoor Mechanical Pin Timer Switch

WARNING

To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions.

• Do not connect any devices which exceed the maximum ratings of the timer.
• Do not connect this timer to appliances that contain heating elements (cooking appliances, heaters, irons, etc.). Failure of the timer to shut off such devices may lead to overheating and potential fire.
• Do not immerse in water.
• Children are not allowed to use the timer without supervision.
• Do not disassemble or repair the product, but only by authorized service personnel.
• Always unplug and store indoors when not in use.

Product Layout

The product layout shows a timer switch with three main parts labeled:

• 1. Side Switch: This switch is used to set the timer function to either 'Always ON' or 'Timer Control'.
• 2. Timer Dial: This dial has pins that represent time intervals. Each pin represents 15 minutes, so 4 pins equal 1 hour. A pin in the down position means ON, and a pin in the up position means OFF.
• 3. Outlet: This is where you plug in the lights or devices that you want to control with the timer.

Operation Instructions

1. Set the current time: Turn the dial clockwise until the arrow points to the current time.
2. Set ON/OFF periods: Start with all pins pulled up. Push the pins down for the periods you want the timer to be ON. Pins in the down position indicate ON, and pins in the up position indicate OFF.
3. Activate timer: Push the "ON / TIMER" switch to the "TIMER" position and plug the timer into the wall socket. You can override the timer operation by setting the switch to the "ON" position, which will keep the power supply always ON. Ensure the switch is set back to "TIMER" for proper timer function.
4. Connect device: Plug your electrical device directly into the timer's outlet. Make sure the device itself is in the ON state for the timer to control it and for it to work properly.
5. After blackout: If there is a power outage, reset the timer as indicated in the previous steps.

Specifications

• Input Voltage: 240VAC 50Hz
• Max. Current: 13A 3120W

One-year Limited Warranty

Dewenwils warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. The warranty is void if damage is caused by misuse or improper installation.

Please contact Dewenwils if you have any questions. Email: eusupport@dewenwils.com. Our dedicated customer service team will respond to you within 24 hours.

Thank you for your purchase. Please contact us if you have any problem. Email: eusupport@dewenwils.com. Please attach your User Name or Order ID so that we can assist you better.